Metal-metal charge transfer and solvatochromism in cyanomanganese carbonyl complexes of ruthenium and osmium

The complexes [(H3N)5Ru(II)(mu-NC)Mn(I)Lx]2+, prepared from [Ru(OH2)(NH3)5]2+ and [Mn(CN)L(x)] {L(x) = trans-(CO)2{P(OPh)3}(dppm); cis-(CO)2(PR3)(dppm), R = OEt or OPh; (PR3)(NO)(eta-C5H4Me), R = Ph or OPh}, undergo two sequential one-electron oxidations, the first at the ruthenium centre to give [(H3N)5Ru(III)(mu-NC)Mn(I)Lx]3+; the osmium(III) analogues [(H3N)5Os(III)(mu-NC)Mn(I)Lx]3+ were prepared directly from [Os(NH3)5(O3SCF3)]2+ and [Mn(CN)Lx]. Cyclic voltammetry and electronic spectroscopy show that the strong solvatochromism of the trications depends on the hydrogen-bond accepting properties of the solvent. Extensive hydrogen bonding is also observed in the crystal structures of [(H3N)5Ru(III)(mu-NC)Mn(I)(PPh3)(NO)(eta-C5H4Me)][PF6]3.2Me2CO.1.5Et2O, [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)(dppm)2-trans][PF6]3.5Me2CO and [(H3N)5Ru(III)(mu-NC)Mn(I)(CO)2{P(OEt)3}(dppm)-trans][PF6]3.4Me2CO, between the amine groups (the H-bond donors) at the Ru(III) site and the oxygen atoms of solvent molecules or the fluorine atoms of the [PF6]- counterions (the H-bond acceptors).     

Investigating the mechanisms of diamond polishing using Raman spectroscopy

Recent research has shown that a phase transformation of diamond to a different form of carbon is involved when diamonds are polished in the traditional fashion. The question as to how this phase transformation is activated and maintained to produce high wear rates is of great technological interest since it may radically change the way we view the processing of diamond. This paper describes the use of Raman spectroscopy to examine debris produced on the diamond polishing wheel, both during its preparation and during polishing. In addition, polished diamond surfaces were examined for the possible existence of non-diamond surface layers in an attempt to identify material removal mechanisms. Raman spectroscopy proves ideal for these analyses because its relatively high spatial resolution is well suited to the analysis of small wear features and debris particles, and because of the wealth of information it reveals about chemical structure. This level of structural information has been lacking in previous analyses of diamond polishing debris. In addition to the non-diamond carbon found in the wear debris, significant quantities of two iron oxides, magnetite (Fe₃O₄) and haematite (α-Fe₂O₃), were also found. An interesting observation was that a transformation from magnetite to haematite could be induced either by using high power laser excitation or by frictional heating during polishing. It is suggested that some of the Raman peaks previously attributed to lonsdaleite might better be explained by the presence of these oxides.     

Harmonic analysis of lossy, piezoelectric composite transducers using the plane wave expansion method

Periodic composite ultrasonic transducers offer many advantages but the periodic pillar architecture can give rise to unwanted modes of vibration which interfere with the piston like motion of the fundamental thickness mode. In this paper, viscoelastic loss is incorporated into a three-dimensional plane wave expansion model (PWE) of these transducers. A comparison with experimental and finite element data is conducted and a design to damp out these lateral modes is investigated. Scaling and regularisation techniques are introduced to the PWE method to reduce ill-conditioning in the large matrices which can arise. The identification of the modes of vibration is aided by examining profiles of the displacements, electrical potential and Poynting vector. The dispersive behaviour of a 2-2 composite transducer with high shear attenuation in the passive phase is examined. The model shows that the use of a high shear attenuation filler material improves the frequency band gap surrounding the fundamental thickness mode.     

Rewritable remote encoding and decoding of miniature multi-bit magnetic tags for high-throughput biological analysis

We have investigated a new magnetic labelling technology for high-throughput biomolecular identification and DNA sequencing. Planar multi-bit magnetic tags comprising a magnetic barcode formed by an ensemble of micron-sized thin film ferromagnetic Co bars and a 15 x 15 micron Au square for immobilization of probe molecules have been designed and fabricated. We show that by using a globally applied magnetic field and magneto-optical Kerr microscopy the magnetic elements in the multi-bit magnetic tags can be addressed individually and encoded/decoded remotely. The power of the approach is the read/write technique, which allows modest globally applied magnetic fields to write almost unlimited numbers of codes to populations of tags rather than individuals. The magnetic nature of the technology also lends itself naturally to fast, remote decoding and the ability to rewrite tags if needed. We demonstrate the critical steps needed to show the feasibility of this technology, including fabrication, remote writing and reading, and successful functionalization of the tags as verified by fluorescence detection. This approach is ideal for encoding information on tags in microfluidic flow or suspension, in order to label oligonucleotides during split-and-mix synthesis, and for combinatorial library-based high-throughput multiplexed bioassays.     

Monodisperse Cylindrical Micelles of Controlled Length with a Liquid‐Crystalline Perfluorinated Core by 1D “Self‐Seeding”

Precise control over the morphology and dimensions of block copolymer (BCP) micelles has attracted interest due to the potential of this approach to generate functional nanostructures. Incorporation of liquid crystalline (LC) block can provide additional ways to vary micellar morphologies, but the formation of uniform micelles with controllable dimensions from LC BCPs has not yet been realized. Herein, we report the preparation of monodisperse cylindrical micelles with a LC poly(2‐(perfluorooctyl)ethyl methacrylate (PFMA) core via a fragmentation‐thermal annealing (F‐TA) process, resembling the “self‐seeding” process of crystalline BCP micelles. The average length of the cylinders increases with annealing temperature, with a narrow length distribution (L_w/L_n<1.1). We also demonstrate the potential application of the cylinders with LC cores as a cargo‐carrier by the successful incorporation of a hydrophobic fluorescent dye tagged with a fluorooctyl group.     

3 + 2] Cycloaddition of acetylenes with azides to give 1,4-disubstituted 1,2,3-triazoles in a modular flow reactor

The cycloaddition of acetylenes with azides to give the corresponding 1,4-disubstituted 1,2,3-triazoles is reported using immobilised reagents and scavengers in pre-packed glass tubes in a modular flow reactor.     

The d4/d3 redox pairs [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']z (z=0 and 1): structural consequences of electron transfer and implications for the inverse halide order

The d4 halide complexes [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp'] {X=F, Cl, Br or I; R=Me or Ph; M=Mo or W; Tp'=hydrotris(3,5-dimethylpyrazolyl)borate} undergo one-electron oxidation to the d3 monocations [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']+, isolable for M=W, R=Me. X-Ray structural studies on the redox pairs [WX(CO)(eta-MeC[triple bond, length as m-dash]CMe)Tp']z (X=Cl and Br, z=0 and 1), the ESR spectra of the cations [WX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']+ (X=F, Cl, Br or I; R=Me or Ph), and DFT calculations on [WX(CO)(eta-MeC[triple bond, length as m-dash]CMe)Tp']z (X=F, Cl, Br and I; z=0 and 1) are consistent with electron removal from a HOMO (of the d4 complexes) which is pi-antibonding with respect to the W-X bond, pi-bonding with respect to the W-C(O) bond, and delta-bonding with respect to the W-Calkyne bonds. The dependence of both oxidation potential and nu(CO) for [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp'] shows an inverse halide order which is consistent with an ionic component to the M-X bond; the small size of fluorine and its closeness to the metal centre leads to the highest energy HOMO and the lowest oxidation potential. In the cations [MX(CO)(eta-RC[triple bond, length as m-dash]CR)Tp']+ electronegativity effects become more important, leading to a conventional order for Cl, Br and I. However, high M-F pi-donation is still facilitated by the short M-F distance.     

Characteristics of sulfur response in a micro-flame photometric detector

A recently reported micro-flame photometric detector (microFPD) has been examined in greater detail for its sulfur response characteristics. While supporting an "upside down" flame on a stainless steel capillary burner (delivering oxygen) in a counter flowing stream of premixed hydrogen and oxygen, the extremely small flame of the muFPD (30 nL) was observed to produce linear sulfur emission as HSO(*). In this mode, linear sulfur response was obtained over four orders of magnitude with a minimum detectable flow of 2 x 10(-10) g S/s. Additionally, a broad series of sulfur compounds ranging in chemical structure were examined in the microFPD in order to determine the extent of equimolarity and reproducibility of response toward this element. Results of exploring both the linear (HSO(*)) and quadratic (S(2)(*)) modes indicate that the %RSD and equimolarity of sulfur response are comparable between that of the microFPD and a conventional flame photometric detector (FPD).     

Exploring aromatic chemical space with NEAT: novel and electronically equivalent aromatic template

In this paper, we describe a lead transformation tool, NEAT (Novel and Electronically equivalent Aromatic Template), which can help identify novel aromatic rings that are estimated to have similar electrostatic potentials, dipoles, and hydrogen bonding capabilities to a query template; hence, they may offer similar bioactivity profiles. In this work, we built a comprehensive heteroaryl database, and precalculated high-level quantum mechanical (QM) properties, including electrostatic potential charges, hydrogen bonding ability, dipole moments, chemical reactivity, and othe properties. NEAT bioisosteric similarities are based on the electrostatic potential surface calculated by Brood, using the precalculated QM ESP charges and other QM properties. Compared with existing commercial lead transformation software, (1) NEAT is the only one that covers the comprehensive heteroaryl chemical space, and (2) NEAT offers a better characterization of novel aryl cores by using high-evel QM properties that are relevant to molecular interactions. NEAT provides unique value to medicinal chemists quickly exploring the largely uncharted aromatic chemical space, and one successful example of its application is discussed herein.