A structural and spectroscopic study on para-aminohippuric acid with experimental and theoretical approaches

In this work, the molecular conformation, vibrational and electronic analysis of para-aminohippuric acid (pAHA, C(9)H(10)N(2)O(3)) were presented for the ground state using experimental techniques (FT-IR, FT-Raman and UV) and density functional theory (DFT) employing B3LYP exchange correlation with the 6-311++G(d,p) basis set. FT-IR and FT-Raman spectra were recorded in the regions of 400-4000cm(-1) and 50-4000cm(-1), respectively. The UV absorption spectra of the compound that dissolved in ethanol and water solution were recorded in the range of 190-400nm. Potential energy curve was computed by means of scanning NCCO torsion angle. The geometry optimization and the energies associated possible four conformers (C1-C4) were computed. The computational results diagnose the most stable conformer of pAHA as the C1 form. Optimized structure of compound was interpreted and compared with the earlier reported experimental values. The complete assignments of fundamental vibrations were performed on the basis of the total energy distribution (TED) of the vibrational modes, calculated with scaled quantum mechanics (SQM) method. A study on the electronic properties, such as frontier molecular energies, absorption wavelengths and oscillator strengths, were predicted by time-dependent DFT (TD-DFT) approach, while taking solvent effects into account. To investigate non-linear optical properties: polarizability, anisotropy of polarizability and molecular first hyperpolarizability of molecule were computed. Thermodynamic properties (heat capacity, entropy and enthalpy) of the title compound at different temperatures were calculated.     

Double‐Armed Benzo‐15‐crown‐5 Ligands and Complexes and Single Crystal Structure Determination

This work describes the syntheses and characterizations of double‐armed benzo‐15‐crown‐5 containing nitro ( 1 ), amine ( 2 ), and imine ( 3–5 ) groups, and their sodium complexes ( 1a–5a ). Structures of the ligands ( 1–5 ) and sodium complexes ( 1a–5a ) were identified via elemental analyses, and infrared, ¹H‐ nuclear magnetic resonance (NMR), ¹³C‐NMR, and mass spectrometry. The metal extractions were examined by using ultravoilet–visible spectrophotometry. Single crystal for 2 was successfully obtained, and its X‐ray crystal structure was resolved. The compound 2 crystallizes in triclinic, space group p‐1 with a = 9.1420(3), b = 14.9580(4), c = 20.4110(5), and Z = 4.     

Synthesis and investigation of cytotoxicity of new N- and S,S-substituted-1,4-naphthoquinone (1,4-NQ) derivatives on selected cancer lines

1,4-Naphthoquinones (1,4-NQ) have been reported to possess a variety of pharma-cological properties including antibacterial, antifungal, antiviral, anti-inflammatory, anti-artherosclerotic, and anticancer effects. In this study, new N- and S,S-substituted-1,4-NQ derivatives were synthesized in excellent yields and were completely characterized by spectroscopic analysis IR, NMR (¹H and ¹³C), MS and microanalysis. The cytotoxic activities of 1,4-NQ derivatives were examined against to A-549, DU145, HCT-116 and MDA-MB-231 cancer cells. Among these compounds, 2-[4-(2-furoyl)piperazine-1-yl]-3-chloro-1,4-NQ 5 and 2,3-bis(cyclobuthylsulfanyl)-1,4-NQ 17 were identified as the most potent anticancer agents with cytotoxic activity against three cell lines (breast (MDA-MB-231), prostate (DU145), colorectal (HCT-116).     

Titrations in non-aqueous media: potentiometric investigation of symmetrical and unsymmetrical tetra-aryl porphyrins with 4-nitrophenyl and 4-aminophenyl substituents in nitrobenzene solvent

The basicity of the symmetrical and unsymmetrical tetraphenylporphyrins, namely 5,10,15,20-tetraphenylporphyrin (I) (references), 5-(4-nitrophenyl)-10,15,20-triphenylporphyrin (II), a mixture of 5,10-bis(4-nitrophenyl)-15,20-diphenylporphyrin and 5,15-bis(4-nitrophenyl)-10,20-diphenylporphyrin (III), 5,10,15-tris(4-nitrophenyl)-20-phenylporphyrin (IV), 5,10,15,20-tetrakis(4-nitrophenyl)porphyrin (V), 5-(4-aminophenyl)-10,15,20-triphenylporphyrin (VI), a mixture of 5,10-bis(4-aminophenyl)-15,20-diphenylporphyrin and 5,15-bis(4-aminophenyl)-10,20-diphenylporphyrin (VII), 5,10,15-tris(4-aminophenyl)-20-phenylporphyrin (VIII) and 5,10,15,20-tetrakis(4-aminophenyl)porphyrin (IX), was investigated potentiometrically in nitrobenzene solvent. This investigation showed that these compounds are basic rather than acidic. Although they can not be titrated even with tetrabuthylammonium hydroxide, they can easily be titrated with perchloric acid to give well shaped and stoichiometric end-points. In addition they all undergo two proton reactions per porphyrin molecule. However, compounds VI, VII, VIII and IX each shows a second end-point to give three, four, five and six proton reactions, respectively, per porphyrin molecule. Half neutralization potentials (measures of their basicity) of these compounds are: I=368, II=409, III=432, IV=461, V=520, VI=340, VII=302, VIII=238 and IX=225 mV versus Ag/AgCl in methanol. These potentials clearly indicate that, if para-hydrogen with respect to the porphyrin core of tetraphenylporphyrin (I) is replaced with an acidifying nitro group (II, III, IV and V) the basicity of I decreases. This decrease is approximately proportional to the number of nitro groups. Each nitro group decreases the half neutralization potential by about 35 mV. On the other hand, if para-hydrogen indicated above is replaced with a basifying amino group (VI, VII, VIII and IX) the basicity increases. This increase is also approximately proportional to the number of amino groups. Each amino group increases the half neutralization potential by about 36.7 mV. The values 35 and 36.7 mV indicate that in nitrobenzene solvent the electron releasing power of an amino group to the porphyrin system is a little stronger than the electron withdrawing power of a nitro group from the porphyrin system. All these observations reveal that the nitrogen atoms at the core of the porphyrin molecules are strongly influenced by changes at the periphery of the molecules, which is a very good indication that the substituted phenyl groups and the cores of the porphyrins are nearly in the same plane.     

The synthesis of new cyclic thioquinone derivatives

New bis(thio)substituted, S‐,O‐substituted, and S‐,S‐substituted benzoquinone compounds were synthesized from the reaction of p‐chloranil ( 1 ) with S‐,O‐substituted thiols, dithiols, and monothiols. The ¹³C NMR spectra and the IR spectra of heterocyclic compounds 3 , 4 and 7 , 8 showed different behavior; that of 3 , 7 showed a carbon signal and a >CO group band for the carbonyl group and that of 4 , 8 showed two carbon signals and split bands for the carbonyl group. The structures of the novel compounds were characterized by microanalysis, FT‐IR, ¹H NMR, ¹³C NMR, MS, and UV–vis spectroscopy. The crystal structure of 2,3,5,6‐tetrakis(4‐fluorobenzylthio)cyclohexa‐2,5‐diene‐1,4‐dione ( 15 ) was determined by the X‐ray diffraction method. © 2010 Wiley Periodicals, Inc. Heteroatom Chem 21:446–452, 2010; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.20634     

Syntheses,spectroscopic and crystallographic characterizations of 4-nitrobenzyloxy derivatives and benzofurans from <Emphasis Type="Italic">ortho</Emphasis>-substituted benzaldehydes and 4-nitrobenzyl bromide

A series of benzyloxybenzaldehyde derivatives (1–3) were prepared by the reactions of 4-nitrobenzyl bromide with 4-hydroxy-3-methoxybenzaldehyde (vanillin), 2-hydroxy-3-methoxybenzaldehyde (o-vanillin) and 2-hydroxy-4-methoxybenzaldehyde. When the reaction time is quite long, benzofuran derivatives (4 and 5) were obtained by the reactions of ortho-hydroxyaldehydes with the 4-nitrobenzyl bromide. Condensation reactions among the three benzyloxybenzaldehyde derivatives (1–3) with 2-aminomethylfuran (furfurylamine) yielded the new imine compounds (6–8). The structures of these aldehydes (1–3), benzofuran derivatives (4 and 5) and imine compounds (6–8) were confirmed on the basis of elemental analyses, IR, ¹H NMR and ¹³C NMR and mass spectroscopy. The solid-state structures of compounds 4–6 were determined by single-crystal X-ray crystallography.     

Preparation and spectroscopic characterization of iron(II) and copper(II) complexes of a functionalized crown ether

Condensation between 4′-aminobenzo-15-crown-5- and 4-antipyrinecarboxaldehyde yielded the functionalized crown ether (L = 1,5-dimethyl-4-[(2,3,5,6,8,9,11,12-octahydro-1,4,7,10,13-benzopentaoxacyclopentadecin-15-ylimino)methyl]-2-phenyl-1,2-dihydro-3H-pyrazol-3-one). A 1:1 (Na⁺:L) complex has been prepared. The reaction of Fe(II) and Cu(II) salts with L gave complexes of composition [Fe(L)Cl₂] and [Cu(L)₂Cl₂]. Heteronuclear complexes [Fe(L)Cl₂Na]ClO₄ and [Cu(L)₂Cl₂Na]ClO₄ have also been synthesized from the reactions of [Fe(L)Cl₂] and [Cu(L)₂Cl₂] with NaClO₄. The compounds have been characterized by microanalyses and spectroscopic methods.     

Synthesis and Antibacterial and Antifungal Properties of Novel S-, N-, N,S-, and S,O-Substituted 1,4-Naphthoquinone Derivatives

Abstract

A novel series of substituted 1,4-naphthoquinone derivatives were synthesized and evaluated for their antibacterial and antifungal activity. The structures of the novel products were characterized by spectroscopic methods. Among the tested compounds, 2,2′,3,3′-alkoxy substituted naphthoquinones, S,O-substituted naphthoquinone, and N,S-substituted naphthoquinone derivatives are the most potent antifungals against C. tenuis. 2,3-Thio-2′,3′-alkoxy substituted naphthoquinones are the most effective antifungal compounds against A. niger.

Supplemental materials are available for this article. Go to the publisher's online edition of Phosphorus, Sulfur, and Silicon and the Related Elements to view the free supplemental file.