Simultaneous acquisition of magnetic resonance spectroscopy (MRS) data and positron emission tomography (PET) images with a prototype MR-compatible, small animal PET imager

Multi-modality imaging (such as PET-CT) is rapidly becoming a valuable tool in the diagnosis of disease and in the development of new drugs. Functional images produced with PET, fused with anatomical images created by MRI, allow the correlation of form with function. Perhaps more exciting than the combination of anatomical MRI with PET, is the melding of PET with MR spectroscopy (MRS). Thus, two aspects of physiology could be combined in novel ways to produce new insights into the physiology of normal and pathological processes. Our team is developing a system to acquire MRI images and MRS spectra, and PET images contemporaneously. The prototype MR-compatible PET system consists of two opposed detector heads (appropriate in size for small animal imaging), operating in coincidence mode with an active field-of-view of approximately 14 cm in diameter. Each detector consists of an array of LSO detector elements coupled through a 2-m long fiber optic light guide to a single position-sensitive photomultiplier tube. The use of light guides allows these magnetic field-sensitive elements of the PET imager to be positioned outside the strong magnetic field of our 3T MRI scanner. The PET scanner imager was integrated with a 12-cm diameter, 12-leg custom, birdcage coil. Simultaneous MRS spectra and PET images were successfully acquired from a multi-modality phantom consisting of a sphere filled with 17 brain relevant substances and a positron-emitting radionuclide. There were no significant changes in MRI or PET scanner performance when both were present in the MRI magnet bore. This successful initial test demonstrates the potential for using such a multi-modality to obtain complementary MRS and PET data.     

A natural abundance Se solid-state NMR study of inorganic compounds

Various inorganic selenium-based compounds were analysed by ⁷⁷Se solid-state NMR, and a distinct difference in chemical shift ranges for compounds where selenium is present as selenide (Se²⁻) ionically and covalently bonded systems was observed. The selenides exhibit a shift range of approximately −700 to −100 ppm, as opposed to 700 to 1600 ppm for the compounds where there tends to be more direct covalent bonding to the selenium. The anisotropic hyperfine shift observed in NbSe₂ is shown to be axially symmetric, where the H₁₁ component is found to be normal to the Se3-trigonal plane.     

Characterization of Standard Reference Material 2941, uranyl-ion-doped glass, spectral correction standard for fluorescence

Standard Reference Material^® (SRM^®) 2941 is a cuvette-shaped, uranyl-ion-doped glass, recommended for use for relative spectral correction of emission and day-to-day performance validation of fluorescence spectrometers. Properties of this standard that influence its effective use or contribute to the uncertainty in its certified emission spectrum have been explored here. These properties include its photostability, absorbance, dissolution rate in water, anisotropy, temperature coefficient of fluorescence intensity, and fluorescence lifetimes. The expanded uncertainties in the certified spectrum are about 4% around the peak maximum at 526 nm, using an excitation wavelength of 427 nm. The SRM also exhibits a strong resistance to photodegradation, with no measurable decrease in fluorescence intensity even after 8 h of laser irradiation.     

A beaker without walls: formation of deeply supercooled binary liquid solutions of alcohols from nanoscale amorphous solid films

Layered nanoscale amorphous solid films of methanol and ethanol undergo complete intermixing prior to the onset of measurable desorption at 120 K. This intermixing precedes and inhibits crystallization. Subsequent desorption of the film is described quantitatively by a kinetic model describing evaporation from a continuously mixed ideal binary liquid solution. This occurs at temperatures below the melting point of the binary mixture, indicating ideal behavior for the supercooled liquid solution. This approach provides a new method for preparing and examining deeply supercooled solutions.     

Extremely low vertical-emittance beam in the accelerator test facility at KEK

Electron beams with the lowest, normalized transverse emittance recorded so far were produced and confirmed in single-bunch-mode operation of the Accelerator Test Facility at KEK. We established a tuning method of the damping ring which achieves a small vertical dispersion and small x-y orbit coupling. The vertical emittance was less than 1% of the horizontal emittance. At the zero-intensity limit, the vertical normalized emittance was less than 2.8 x 10(-8) rad m at beam energy 1.3 GeV. At high intensity, strong effects of intrabeam scattering were observed, which had been expected in view of the extremely high particle density due to the small transverse emittance.     

Multispectrum analysis of CH4 in the ν4 spectral region: II. Self-broadened half widths, pressure-induced shifts, temperature dependences and line mixing

Accurate values for line positions, absolute line intensities, self-broadened half width and self-pressure-induced shift coefficients have been measured for over 400 allowed and forbidden transitions in the ν₄ band of methane (¹²CH₄). Temperature dependences of half width and pressure-induced shift coefficients were also determined for many of these transitions. The spectra used in this study were recorded at temperatures between 210 and 314 K using the National Solar Observatory's 1 m Fourier transform spectrometer at the McMath-Pierce solar telescope. The complete data set included 60 high-resolution (0.006-0.01 cm⁻¹) absorption spectra of pure methane and methane mixed with dry air. The analysis was performed using a multispectrum nonlinear least squares curve fitting technique where a number of spectra (20 or more) were fit simultaneously in spectral intervals 5-15 cm⁻¹ wide. In addition to the line broadening and shift parameters, line mixing coefficients (using the off-diagonal relaxation matrix element formalism) were determined for more than 50 A-, E-, and F-species transition pairs in J manifolds of the P- and R-branches. The measured self-broadened half width and self-shift coefficients, their temperature dependences and the line mixing parameters are compared to self-broadening results available in the literature and to air-broadened parameters determined for these transitions from the same set of spectra.     

An optimized magnet for magnetic refrigeration

A magnet designed for use in a magnetic refrigeration device is presented. The magnet is designed by applying two general schemes for improving a magnet design to a concentric Halbach cylinder magnet design and dimensioning and segmenting this design in an optimum way followed by the construction of the actual magnet. The final design generates a peak value of 1.24 T, an average flux density of 0.9 T in a volume of 2 L using only 7.3 L of magnet, and has an average low flux density of 0.08 T also in a 2 L volume. The working point of all the permanent magnet blocks in the design is very close to the maximum energy density. The final design is characterized in terms of a performance parameter, and it is shown that it is one of the best performing magnet designs published for magnetic refrigeration.     

Comparison of adjustable permanent magnetic field sources

A permanent magnet assembly in which the flux density can be altered by a mechanical operation is often significantly smaller than comparable electromagnets and also requires no electrical power to operate. In this paper five permanent magnet designs in which the magnetic flux density can be altered are analyzed using numerical simulations, and compared based on the generated magnetic flux density in a sample volume and the amount of magnet material used. The designs are the concentric Halbach cylinder, the two half Halbach cylinders, the two linear Halbach arrays and the four and six rod mangle. The concentric Halbach cylinder design is found to be the best performing design, i.e. the design that provides the most magnetic flux density using the least amount of magnet material. A concentric Halbach cylinder has been constructed and the magnetic flux density, the homogeneity and the direction of the magnetic field are measured and compared with numerical simulation and a good agrement is found.     

Structure,thermal properties,conductivity and electrochemical stability of di-urethanesil hybrids doped with LiCF<Subscript>3</Subscript>SO<Subscript>3</Subscript>

Variable chain length di-urethane cross-linked poly(oxyethylene) (POE)/siloxane hybrid networks were prepared by application of a sol-gel strategy. These materials, designated as di-urethanesils (represented as d-Ut(Y′), where Y′ indicates the average molecular weight of the polymer segment), were doped with lithium triflate (LiCF₃SO₃). The two host hybrid matrices used, d-Ut(300) and d-Ut(600), incorporate POE chains with approximately 6 and 13 (OCH₂CH₂) repeat units, respectively. All the samples studied, with compositions ∞ > n ≥ 1 (where n is the molar ratio of (OCH₂CH₂) repeat units per Li⁺), are entirely amorphous. The di-urethanesils are thermally stable up to at least 200 °C. At room temperature the conductivity maxima of the d-Ut(300)- and d-Ut(600)-based di-urethanesil families are located at n = 1 (approximately 2.0 × 10⁻⁶ and 7.4 × 10⁻⁵ Scm⁻¹, respectively). At about 100 °C, both these samples also exhibit the highest conductivity of the two electrolyte systems (approximately 1.6 × 10⁻⁴ and 1.0 × 10⁻³ Scm⁻¹, respectively). The d-Ut(600)-based xerogel with n = 1 displays excellent redox stability.