Peristaltic radiative flow of Sisko nanomaterial with entropy generation and modified Darcy’s law

Journal of Thermal Analysis and Calorimetry - Nanomaterials are quite significant in the physiological and engineering processes. Such materials have motivated the recent scientists in view of...     

Ion chromatograph with three-dimensional printed absorbance detector for indirect ultraviolet absorbance detection of phosphate in effluent and natural waters

An ion chromatography system employing a low-cost three-dimensional printed absorbance detector for indirect ultraviolet detection towards portable phosphate analysis of environmental and industrial waters has been developed. The optical detection cell was fabricated using stereolithography three-dimensional printing of nanocomposite material. Chromatographic analysis and detection of phosphate were carried out using a CS5A 4 × 250 mm analytical column with indirect ultraviolet detection using a 255 nm light-emitting diode. Isocratic elution using a 0.6 mM potassium phthalate eluent combined with 1.44 mM sodium bicarbonate was employed at a flow rate of 0.75 mL/min. A linear calibration range of 0.5 to 30 mg/L PO₄³⁻ applicable to environmental and wastewater analysis was achieved. For retention time and peak area repeatability, relative standard deviation values were 0.68 and 4.09%, respectively. Environmental and wastewater samples were analyzed with the optimized ion chromatography platform and the results were compared to values obtained by an accredited ion chromatograph. For the analysis of environmental samples, relative errors of <14 % were achieved. Recovery analysis was also carried out on both freshwater and wastewater samples and recovery results were within the acceptable range for water analysis using standard ion chromatography methods.     

MHD Three-Dimensional Flow of Viscoelastic Fluid with Convective Surface Boundary Condition

This article reports the magnetohydrodynamic (MHD) three-dimensional flow of viscoelastic fluid over a stretching surface with heat transfer. Mathematical analysis is formulated using convective boundary conditions. Computations of dimensionless velocity and temperature fields are presented. The tabulated values show excellent agreement between present and previous limiting analysis. Graphical results show the impact of embedded parameters entering into the problem.     

Framing the novel aspects of irreversibilty in MHD flow of Williamson nanomaterial with thermal radiation near stagnation point

Journal of Thermal Analysis and Calorimetry - Here, MHD stagnation point flow of non-Newtonian fluid over a stretchable surface is considered. Process of modeling is characterized for basic...     

Hydromagnetic rotating flow of a fourth‐order fluid past a porous plate

The rotating flow in the presence of a magnetic field is a problem belonging to hydromagnetics and deserves to be more widely studied than it has been to date. In the non‐linear regime the literature is scarce. We develop the governing equations for the unsteady hydromagnetic rotating flow of a fourth‐order fluid past a porous plate. The steady flow is governed by a boundary value problem in which the order of differential equations is more than the number of available boundary conditions. It is shown that by augmenting the boundary conditions based on asymptotic structures at infinity it is possible to obtain numerical solutions of the nonlinear hydromagnetic equations. Effects of uniform suction or blowing past the porous plate, exerted magnetic field and rotation on the flow phenomena, especially on the boundary layer structure near the plate, are numerically analysed and discussed. The flow behaviours of the Newtonian fluid and second‐, third‐ and fourth‐order non‐Newtonian fluids are compared for the special flow problem, respectively. Copyright © 2004 John Wiley & Sons, Ltd.     

Power law fluid model for blood flow through a tapered artery with a stenosis

In the present paper, blood flow through a tapered artery with a stenosis is analyzed, assuming the flow is steady and blood is treated as non-Newtonian power law fluid model. Exact solution has been evaluated for velocity, resistance impedance, wall shear stress and shearing stress at the stenosis throat. The graphical results of different types of tapered arteries (i.e. converging tapering, diverging tapering, non-tapered artery) have been examined for different parameters of interest. Some special cases of the problem are also presented.     

Effects of binary chemical reaction and Arrhenius activation energy in Darcy–Forchheimer three-dimensional flow of nanofluid subject to rotating frame

Darcy–Forchheimer three-dimensional rotating flow of nanoliquid in the presence of activation energy and heat generation/absorption is examined. Heat and mass transport via convective process is considered. Buongiorno model has been employed to illustrate thermophoresis and Brownian diffusion effects. Adequate transformation procedure gives rise to system in terms of nonlinear ODE’s. An efficient numerical technique namely NDsolve is used to tackle the governing nonlinear system. The graphical illustrations examine the outcomes of various sundry variables. Heat and mass transfer rates are also computed and examined. Our results indicate that the temperature and concentration distributions are enhanced for larger values of porosity parameter and Forchheimer number.

     

Synthesis of ordered mesoporous carbonaceous materials and their highly efficient capture of uranium from solutions

An extremely effortless method was applied for successful synthesis of mesoporous carbonaceous materials(MCMs) using well-ordered mesoporous silica as template. Various characterizations(scanning electron microscopy(SEM), transmission electron microscopy(TEM), X-ray diffraction(XRD), Fourier transform infrared spectroscopy(FT-IR), Raman, X-ray photoelectron spectroscopy(XPS), Brunner-Emmet-Teller(BET) and Zeta potential) confirmed that MCMs had large surface area, uniform pore size distribution, and abundant oxygen-containing functional groups. The batch techniques were employed to study U(VI) adsorption on MCMs under a wide range of experiment conditions. The adsorption kinetics of U(VI) onto MCMs were well-fitted by pseudo-second-order kinetic model, indicating a chemisorption process. The excellent adsorption capacity of MCMs calculated from the Langmuir model was 293.95 mg g~(-1) at pH 4.0. The FT-IR and XPS analyses further evidenced that the binding of U(VI) onto MCMs was ascribed to the plentiful adsorption sites(–OH and –COOH groups) in the internal mesoporous structure, which could efficiently trap guest U(VI) ions. The results presented herein revealed that MCMs were ideal adsorbents in the efficient elimination of uranium or other lanthanides/actinides from aqueous solutions, which would play an important role in environmental pollution management application.     

3D－QSAR Study on Diindolylmethane and Its Analogues with Comparative Molecular Field Analysis(CoMFA)

Comparative molecular field analysis (CoMFA),a three dimensional quantitative structure-activity relationship (3D-QSAR) method was applied to a series of diindolylmethane(DIM) analogs to study the relationship between their structure and their induction of CYP 1A1-associated ethoxyresorufin-O-deethylase(EROD) activity.A DISCO model of pharmacophore was derved to guide the superposition of the compounds.The coefficient of cross-validation (q^2) and non cross-validation(r^2) for the model established by the study are 0.827 and 0.988 respectively,the value of variance ratio (F) is 103.53 and standard error estimate (SEE)is 0.044.These values indicate that the CoMFA model derived is significant and might have a good prediction for the catalytic activity of DIM compounds.As a consequence,the predicted activity values of new designed compounds were all higher than that of the reported value.     

Beta-N-cyanoethyl acyl hydrazide derivatives: a new class of beta-glucuronidase inhibitors

Eight new beta-N-substituted acyl hydrazides along with their corresponding acyl derivatives were synthesized and screened for in vitro beta-glucuronidase inhibition and found to be active against the enzyme. All of these compounds were found to be noncompetitive inhibitors except for N'-(2-cyanoethyl)-4-hydroxy benzohydrazide (10), which was found to be an uncompetitive inhibitor. Structure-activity relationship studies indicated that the benzyloxy group present in compounds 12 and 13 is responsible for the beta-glucuronidase inhibition activity.