Synthesis, morphology and random laser action of ZnO nanostructures

Three-dimensional (3-D) ZnO random-wall nanostructures and one-dimensional (1-D) ZnO nanorods were prepared on silicon substrates by a simple solid-vapour phase thermal sublimation technique. Optical pumped random lasing has been observed in the ZnO random-wall arrays with a threshold intensity of 0.38 MW/cm² in the emission wavelength from 380 to 395 nm. The optical gain was attributed to the closed-loop scattering and light amplification of the ZnO random-wall. The experimental result suggests that the morphology of nanostructure is the key factor to effect random lasing.     

Characterization of preformed plasmas with an interferometer for ultra-short high-intensity laser-plasma interactions

The evolution of an Al preformed plasma produced by a prepulse was observed before and after the arrival of the main pulse by an interferometer using a femtosecond probe pulse. A central density depression due to the ponderomotive force of the main laser pulse in the preformed plasma with a 100 m scale length was clearly visible after the main pulse irradiation at an intensity of 5×10¹⁶ W/cm². The temporal profiles of the prepulse, characterized by a cross-correlation in conjunction with a precise density profile measurement by an interferometer, contribute to the better understanding of femtosecond laser-matter interactions. PACS 52.38.-r; 52.50.Jm; 52.70.-m     

Modification of the physical properties of chemical vapor-deposited nanostructure diamond by argon-hydrogen plasma surface treatment

Nanostructure diamond (NSD) film with a hardness as high as 70 GPa and an average surface roughness of 10 nm has been synthesized by the two-step negative substrate bias method combined with post-growth Ar-H₂ plasma irradiation. The Ar-H₂ plasma irradiation has been confirmed to improve the uniformity of grain size and shape and increase the hardness of the NSD film.     

Demonstration of laser-frequency upshift by electron-density modulations in a plasma wakefield

In a plasma wake wave generated by a high power laser, modulations of the electron density take the shape of paraboloidal dense shells, moving almost at the speed of light. A counterpropagating laser pulse is partially reflected from the shells, acting as relativistic flying mirrors, producing a time-compressed frequency-multiplied pulse due to the double Doppler effect. The counterpropagating laser pulse reflection from the plasma wake wave accompanied by its frequency multiplication (with a factor from 50 to 114) was detected in our experiment.     

Quantitative analysis of optical power budget of bismuth oxide-based erbium-doped fiber

We investigated optical power budget of Bi₂O₃-based erbium-doped fiber (BIEDF). Lateral spontaneous emissions and scattering laser powers in the BIEDF were measured quantitatively by using an integrating sphere. Compared with the power of amplified spontaneous emission and signal detected at the output fiber end, it was found that considerable powers were consumed by the laterally emitting lights. As an optically undetected loss limits power conversion efficiency (PCE) of the fiber amplifier, the effect of nonradiative decay from the termination level of pump excited state absorption (pump ESA) was estimated from decay rate analyses of the relevant levels. The nonradiative loss was comparable to amplified signal power in the BIEDF when pumped with a 980-nm LD. Nonradiative decay following cooperative upconversion (CUP) process is also discussed using rate equations analysis.     

Oxygen ion conduction in 12CaO·7Al2O3: O2− conduction mechanism and possibility of O− fast conduction

12CaO·7Al₂O₃ (C12A7) with a unique nano-porous structure and free O^2? ions entrapped in sub-nanometer-sized cages is a fast oxygen-ion-conducting material. These free O^2– may be replaced by various oxygen-related species, OH^?, O^2? and O^?, by tuning the atmosphere during the heat treatment. We examined the conduction mechanism for stoichiometric C12A7 (C12A7:O^2?), in which O^2? ions exist as counter anions in sub-nanometer-sized cages, by Raman measurement of C12A7:O^2? annealed in a dry ¹⁸O₂ atmosphere. It was revealed that the primary ion conducting species is an O^2? ion which diffuses via exchange with O^2? in the cage wall. An experimental result on the sample containing O^? ions implied that O^? is more mobile than O^2? in C12A7. Ab initio calculations on the diffusion paths of O^2? and O^? ions in C12A7 supported the above experimental results.     

Low temperature fabrication of 5-10 nm SiO2/Si structure using advanced nitric acid oxidation of silicon (NAOS) method

We have developed the advanced nitric acid oxidation of Si (NAOS) method to form relatively thick (5-10 nm) SiO₂/Si structure with good electrical characteristics. This method simply involves immersion of Si in 68 wt% nitric acid aqueous solutions at 120 °C with polysilazane films. Fourier transform infrared absorption (FT-IR) measurements show that the atomic density of the NAOS SiO₂ layer is considerably high even without post-oxidation anneal (POA), i.e., 2.28 × 10²² atoms/cm², and it increases by POA at 400 °C in wet-oxygen (2.32 × 10²² atoms/cm²) or dry-oxygen (2.30 × 10²² atoms/cm²). The leakage current density is considerably low (e.g., 10⁻⁵ A/cm² at 8 MV/cm) and it is greatly decreased (10⁻⁸ A/cm² at 8 MV/cm) by POA at 400 °C in wet-oxygen. POA in wet-oxygen increases the atomic density of the SiO₂ layer, and decreases the density of oxide fixed positive charges.     

Visualization of Magnetization Transfer Effect in Polyethylene Glycol Impregnated Waterlogged Wood

To visualize the condition of impregnation of polyethylene glycol (PEG) in waterlogged wood, we demonstrated magnetic transfer (MT) magnetic resonance imaging (MRI) through a series of process of PEG impregnation. Three different samples were examined; reference wood, 10 cm cut wood, and 5 cm cut wood. During this study, the upper section sample was kept immersed in water, for the middle and lower sections the concentration of PEG solution was changed at 20 wt% intervals from 20 to 100 wt%. The impregnated periods of each PEG solution concentration were 14 days. Then, MR imaging were performed with/without MT pulse. The MTR value for both 10 cm- and 5 cm-samples were shown to decrease at 20 wt% PEG at peak concentration. When the sample volume was large, e.g., 10 cm-sample, the MTR value decreased to 100 wt% PEG concentration. In contrast, when a sample volume was small, e.g., 5 cm-sample, MTR value decreased to 60 wt% PEG concentration. In conclusion, MTR analysis makes it possible to nondestructively visualize and evaluate the inner condition concerning the PEG impregnation method for waterlogged wood.     

Qβ measurements of 158, 159Pm , 159, 161Sm , 160-165Eu , 163Gd and 166Tb using a total absorption BGO detector

Q _β values of the neutron-rich isotopes of ^160-165Eu and ¹⁶³Gd were measured for the first time using a total absorption bismuth germanate (BGO) detector, and previously obtained data on ^{158, 159}Pm , ^{159, 161}Sm and ¹⁶⁶Tb were re-analyzed. These radioactive sources were prepared by an on-line mass separator (Tokai-ISOL) following the ²³⁸U (p,f reaction. The deduced Q _β values are the following: 6085(80)keV for ¹⁵⁸Pm , 3805(65)keV for ¹⁵⁹Sm , 5460(140)keV for ¹⁵⁹Pm , 4705(60)keV for ¹⁶⁰Eu , 5065(130)keV for ¹⁶¹Sm , 3705(60)keV for ¹⁶¹Eu , 5575(60)keV for ¹⁶²Eu , 4690(70)keV for ¹⁶³Eu , 3170(70)keV for ¹⁶³Gd , 6430(70)keV for ¹⁶⁴Eu , 5800(120)keV for ¹⁶⁵Eu , and 4695(70)keV for ¹⁶⁶Tb . Moreover, the deduced mass excesses and two-neutron separation energies ( S _2n values) were compared with those of the atomic mass evaluations and theoretical predictions.