Use of p-dimethylaminobenzalhyde as a colored reagent for determination of procaine hydrochloride by spectrophotometry

Spectrophotometric determination of procaine hydrochloride is described. The procaine hydrochloride reacts with p-dimethylaminobenzalhyde in glacial acetic acid to form an Schiff base which is a yellow compound, and its maximum absorption wavelength is at 455nm, ₄₅₅=3.46×10⁴. The absorbance for procaine hydrochloride from 0.2 to 15 μg ml⁻¹ obeys Beer's law. The linear regression equation of the calibration graph is C=5.866A−0.02, with a linear regression correlative coefficient is 0.9994 and relative standard deviation (RSD) of 1.7%; the detection limit is 0.1 μg ml⁻¹; recovery is from 92.0 to 110.0%. Effects of reaction medium, temperature, gentamycin, beneylpenicillin, kanamycin, streptomycin, foreign ions, and stand for time on the determination of procaine hydrochloride have been examined. The results obtained by this method agreed with those by the official method (dead-stop titration). This method is rapid and simple, and can be used for the determination of procaine hydrochloride in injection solution of procaine hydrochloride.     

Synthesis of four diastereomeric 3,5-dialkoxy-2,4-dimethylalkanals by a simple extension of the non-aldol aldol process to bis(propionates)

[formula: see text] The synthesis of all four diastereomers of bis(propionates), 3,5-dialkoxy-2,4-dimethylalkanals, by non-aldol aldol chemistry is described. The epoxy alcohols (3, 4) were converted into the mesylates (9, 11) which were cleanly rearranged to the desired 3,5-bis(oxygenated)-2,4-dimethylalkanals (10, 12) in high yield. The epoxy mesylates (13, 16) gave the desired products (14, 17) in good yield on treatment with TMSOTf and a hindered base.     

Equilibrium interaction of solid surfaces across a polymer melt

Forces across polymer melts are poorly understood despite their importance for adhesion and fabricating composite materials. Using an atomic force microscope (AFM), this interaction was measured for poly(dimethyl siloxane) (PDMS). The structure of the polymer at the surface changed during the first approximately 10 h. Afterward, short-range attractive forces were observed with short-chain PDMS (M(w) = 4200 g/mol). Using PDMS with a molecular weight (M(w) = 18 000 g/mol) above the entanglement limit, we measured a monotonically decaying repulsive force, which indicates that a quasi-immobilized layer had formed at the solid surface. Due to the small radius of curvature of the tip, forces could be measured in equilibrium.     

Aggregate manganese Schiff base moieties by terephthalate or acetate: dinuclear manganese and trinuclear mixed metal Mn2/Na complexes

A reaction system consisting of terephthalic acid, NaOH, inorganic Mn(II) or Mn(III) salt, and salicylidene alkylimine resulted in dinuclear manganese complexes (salpn)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (1, salpn = N,N'-1,3-propylene-bis(salicylideneiminato); phth = terephthalate dianion), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(2) (2, salen = N,N'-ethylene-bis(salicylideneiminato)), (salen)(2)Mn(2)(mu-phth)(CH(3)OH)(H(2)O) (3), and (salen)(2)Mn(2)(mu-phth) (4), while the absence of NaOH in the reaction led to a mononuclear Mn complex (salph)Mn(CH(3)OH)(NO(3)) (5, salph = N,N'-1,2-phenylene-bis(salicylideneiminato)). In addition, a trinuclear mixed metal complex H[Mn(2)Na(salpn)(2)(mu-OAc)(2)(H(2)O)(2)](OAc)(2) (6) was obtained from the reaction system by using maleic acid instead of terephthalic acid. Five-coordinate Mn ions were found in 4 giving rise to an intermolecular interaction and constructing a one-dimensional linear structure. Antiferromagnetic exchange interactions were observed for 1-3, and a total ferromagnetic exchange of 4 was considered to stem from intermolecular magnetic coupling. (1)H NMR signals of phenolate ring and alkylene (or phenylene) backbone of the diamine are similar to those reported in the literature, and the phth protons are at -2.3 to -10.1 ppm. Studies on structure, bond valence sum analysis, and magnetic properties indicate the oxidation states of the Mn ions in 6 to be +3, which are also indicated by ESR spectra in dual mode. Ferromagnetic exchange interaction between the Mn(III) sites was observed with J = 1.74 cm(-1). A quasireversible redox pair at -0.29V/-0.12V has been assigned to the redox of Mn(2)(III)/Mn(III)Mn(II), implying the intactness of the complex backbone in solution.     

Macrocyclic polycther sulfide syntheses. The preparation of thia-crown-5, 6 and 7 compounds

Macroeyclic polyether sulfides have been prepared by reacting an oligoethylene glycol dichloride with a dimercaptan or sodium sulfide as reported in a previous paper (6). The following new compounds were prepared: 1,4,7-trithia(15-crown-5) (1); 1,4,10-trithia(15-crown-5) (II): 1,4,7,10-tetrathia(15-crown-5) (III); I-thia(18-crown-6) (IV); 1,4-dithia(18-crown-6) (V); 1,7-dithia(18-crown-6) (VI); 1,4,7-trithia(18-crown-6) (VII); 1,7-dithia(21-crown-7) (VIII); and 1,4,7-trithia(21-crown-7) (IX). The melting points of these and previously reported thia-crown compounds correlate with their structures. X-ray analyses of two thia-crown compounds indicate that the large sulfur atoms are directed away from the center of the ring.     

A Spectrophotometric Study OE Zirconium Complexes of 4,5-Dihydroxyfluorescein

Zirconium (IV) ions form violet red complex with 4,5-dihydroxyfluorescein in fairly strong mineral acid medium. The reagent has been successfully applied as a metal indicator in the direct EDTA titration of zirconium. The complex formed by 4,5-dihydroxyfluorescein and zirconium ions has been studied spectrophotometrically in 0.1M HCl solution. It is found that when an excess of metal ion is present, a violet red colored complex with metal-ligand ratio of 1:1, (MR) is formed and when an excess of 4,5-dihydroxyfluorescein is present a 1:2 complex (MR₂) may be predominant. The 1:1 complex has maximum absorption at 510 mμ and the 1:2 complex has very low solubility and tends to precipitate out from the solution. Job's method, log-ratio method and gravimetric method were used to establish the composition of complexes. The apparent stability constant of the 1:1 complex is found to be log K_h = 4.46 or K_h = 2.9×10¹ at pH 1.2.     

Octahedral cobalt(III) complexes of the chloropentammine type. XXVII. Effects of Methyl Substituents on reactivities of the cis-chloro-n-propylaminebis(ethylenediamine)-cobalt(III) cation

Salts of one isomeric form of the chloro-n-butylamine-, chloro-iso-butyl-amine- and chloro-sec-butylamine-bis(ethylenediamine)cobalt(III) cations have been prepared and characterised to have a cis-configuration (IR and VIS spectroscopy). Rate constants for their spontaneous aquation, mercury(II)-induced aquation and base hydrolysis have been determined and the activation parameters calculated. The results are compared with data obtained for the n-propylamine complex with a view to investigate the effects of methyl (α, β, γ) substituents on reactivities. The rate-determining dissociation of the outgoing group (Cl^? or HgCl⁺) takes place via either a square-pyramidal or a trigonal-bipyramidal intermediate, depending on whether the activation entropy is negative or positive.     

Solution properties of polyoxymethylene

Light scattering and viscosity have been measured at 25°C. for dilute solutions of six unfractionated polyoxymethylene samples in the mixed solvent hexafluoroacetone–water (mole ratio 1/1.7) slightly buffered with triethylamine. Dialysis equilibrium through porous Vycor glass thimbles indicates that the polymer is strongly solvated by the hydrate (CF₃)₂C(OH)₂, and this must be taken into account in evaluating weight-average molecular weights from the light-scattering data. Over the molecular weight range 23,000–185,000, the intrinsic viscosities (in deciliter per gram) follow the relation The corresponding unperturbed dimensions are σ = 2.3 ± 0.2 or r₀²/nl² = 10.5 ± 1.5.