Rare earth element (REE) in surface mangrove sediment by instrumental neutron activation analysis

A study is carried out on the concentrations of rare earth element (REE) elements present in surface mangrove sediments from 10 locations throughout west coast Malaysia. In carrying out the analysis, the best and most convenient method being the instrumental neutron activation analysis (INAA). Samples were obtained, dried, crushed to powdery form and samples prepared for INAA. All the samples for analysis were weighted approximately 150 mg for short irradiation and 200 mg for long irradiation time. As calibration and quality control procedures, blank samples, standard reference material SL-1 were then irradiated with thermal neutron flux of 4 × 10¹² cm^?2 s^?1 at the MINT TRIGA Mark II research reactor which operated at 750 kW by using a pneumatic transport facility. The REE elements of surface sediment samples in this study are Dy, Sm, Eu,Yb, Lu, Tb, La and Ce. It was found that the level of concentrations of all the REE elements varies in the range (0.35–117.4 mg/kg). The geochemical behavior of REEs in surface sediments and normalized pattern (chondrite and shale) has been studied. The degree of sediments contaminations were computed using an enrichment factor. The results showed that the enrichment factor varied in the range (0.75–6.75).     

Continuous Flow Synthesis of Ketones from Carbon Dioxide and Organolithium or Grignard Reagents

We describe an efficient continuous flow synthesis of ketones from CO₂ and organolithium or Grignard reagents that exhibits significant advantages over conventional batch conditions in suppressing undesired symmetric ketone and tertiary alcohol byproducts. We observed an unprecedented solvent‐dependence of the organolithium reactivity, the key factor in governing selectivity during the flow process. A facile, telescoped three‐step–one‐flow process for the preparation of ketones in a modular fashion through the in‐line generation of organometallic reagents is also established.     

Non-non-crossings in molecular potential energy curves

This article points out a new aspect of approximate calculations of molecular potential curves. Two curves that cross in an exact solution of the electronic wave equation may avoid each other when an approximate method is used. This is in direct contradiction to the usual interpretation of the von Neumann-Wigner non-crossing rule. Examples of this behavior are shown in one-electron systems. The question is, to what extent are calculated avoidances real, and to what extent are they artifacts of incomplete calculations? We suggest that this question is unanswered at present and mention possible molecules for critical theoretical investigations.     

Self-assembly of poly(ethylene oxide)-block-poly(acrylic acid) induced by CaCl2: mechanistic study

The interaction between CaCl 2 and double hydrophilic block copolymer, poly(ethylene oxide) 45- block-poly(acrylic acid) 70, PEO 45- b-PAA 70, was investigated. At a stoichiometric ratio of Ca2+:COO (-) = 0.5, Ca2+ ions were bound to COO (-) groups on PAA segments via electrostatic interaction. Small particles of 4-8 nm in diameter were observed, suggesting the formation of coil-like polymeric globule induced by charge neutralization. At Ca2+:COO (-) >or= 2.5, monodispersed aggregates of average hydrodynamic diameter of 52.0 +/- 7.4 nm were produced. The ISE, ITC, surface tension and fluorescence spectroscopic data confirmed that the formation of these aggregates is not the result of interaction between excess Ca2+ ions and the polymer, but rather it is due to changes in the water activity that triggers the structural rearrangement of Ca2+/PEO 45- b-PAA 70 complex.     

Temperature- and light-responsive blends of pluronic F127 and poly(N,N-dimethylacrylamide-co-methacryloyloxyazobenzene)

Photoresponsive poly(N,N-dimethylacrylamide-co-methacryloyloxyazobenzene) (DMA-MOAB) and temperature-responsive Pluronic F127 (F127) copolymers were blended to obtain systems responsive to both stimuli that are potentially useful for pharmaceutical formulations. The random DMA-MOAB copolymer undergoes a trans to cis isomerization when irradiated by 366 nm light, which modifies both the air-water interfacial behavior and the self-associative properties of the copolymer. Under dark conditions the azobenzene groups of DMA-MOAB in the trans conformation self-associate and the interactions with F127 are minimal. The cis conformation of the azobenzene groups of the DMA-MOAB copolymer is relatively more hydrophilic than the trans conformation, which causes the copolymer micelles to dissociate upon irradiation, allowing the unimers to form mixed micelles with the F127. This causes the sol-gel transition temperature of the DMA-MOAB:F127 blend to be 10 degrees C lower upon irradiation at 366 nm compared to that for the dark conditions. It has been found that F127 (10-12 wt %):DMA-MOAB (5-6 wt %) aqueous solutions have at body temperature a low viscosity when equilibrated in the dark and undergo a sol-gel transition when irradiated. Such a transition strongly alters the diffusion of solutes such as methylene blue within the solutions. This light-induced interaction between the azobenzene moieties of DMA-MOAB and F127 micelles disappears when hydroxypropyl-beta-cyclodextrin (HPbetaCD) is added to the medium. In the presence of HPbetaCD, the cis-azobenzene groups are hosted in the cyclodextrin cavities and the mixed micelles are not formed. Therefore, changes in HPbetaCD concentration could be used to modulate the response of the copolymer blends to light.     

Synthesis and self-assembly of amphiphilic polymeric microparticles

We report the synthesis and self-assembly of amphiphilic, nonspherical, polymeric microparticles. Wedge-shaped particles bearing segregated hydrophilic and hydrophobic sections were synthesized in a microfludic channel by polymerizing across laminar coflowing streams of hydrophilic and hydrophobic polymers using continuous flow lithography (CFL). Particle monodispersity was characterized by measuring both the size of the particles formed and the extent of amphiphilicity. The coefficient of variation (COV) was found to be less than 2.5% in all measured dimensions. Particle structure was further characterized by measuring the curvature of the interface between the sections and the extent of cross-linking using FTIR spectroscopy. The amphiphilic particles were allowed to self-assemble in water or at water-oil interfaces. In water, the geometry of the particles enabled the formation of micelle-like structures, while in emulsions, the particles migrated to the oil-water interface and oriented themselves to minimize their surface energy.     

Branched networks by directed assembly of shape anisotropic magnetic particles

The directed assembly of shape anisotropic magnetic particles into targeted macrostructures requires judicious particle design. We present a framework to understand the self-assembly of magnetic non-Brownian H-shaped particles and the formation of branched networks under an applied magnetic field. A finite element integration (FEI) method is developed to identify the preferred particle orientation (relative to the applied field) at different values of the geometric parameters defining H shapes, and used to construct a phase diagram to generalize the results. Theoretical predictions are validated by comparing with experiments performed using magnetic hydrogels synthesized using stop-flow lithography (SFL). We demonstrate the ability of H-shaped particles to form chains parallel to the field that can thicken in a direction orthogonal to the field, and in some cases with branching. The assembly of a suspension containing H-shaped particles, or rods, or a combination of both, is reported.     

Surface design for controlled crystallization: the role of surface chemistry and nanoscale pores in heterogeneous nucleation

Current industrial practice for control of primary nucleation (nucleation from a system without pre-existing crystalline matter) during crystallization from solution involves control of supersaturation generation, impurity levels, and solvent composition. Nucleation behavior remains largely unpredictable, however, due to the presence of container surfaces, dust, dirt, and other impurities that can provide heterogeneous nucleation sites, thus making the control and scale-up of processes that depend on primary nucleation difficult. To develop a basis for the rational design of surfaces to control nucleation during crystallization from solution, we studied the role of surface chemistry and morphology of various polymeric substrates on heterogeneous nucleation using aspirin as a model compound. Nucleation induction time statistics were utilized to investigate and quantify systematically the effectiveness of polymer substrates in inducing nucleation. The nucleation induction time study revealed that poly(4-acryloylmorpholine) and poly(2-carboxyethyl acrylate), each cross-linked by divinylbenzene, significantly lowered the nucleation induction time of aspirin while the other polymers were essentially inactive. In addition, we found the presence of nanoscopic pores on certain polymer surfaces led to order-of-magnitude faster aspirin nucleation rates when compared with surfaces without pores. We studied the preferred orientation of aspirin crystals on polymer films and found the nucleation-active polymer surfaces preferentially nucleated the polar facets of aspirin, guided by hydrogen bonds. A model based on interfacial free energies was also developed which predicted the same trend of polymer surface nucleation activities as indicated by the nucleation induction times.     

Bactericidal core-shell paramagnetic nanoparticles functionalized with poly(hexamethylene biguanide)

Bactericidal paramagnetic particles were obtained either through the attachment of a conjugate of poly(ethyleneimine) (PEI) and poly(hexamethylene biguanide) (PHMBG) to the surface of magnetite (Fe(3)O(4)) particles, or via the sol-gel encapsulation of magnetite particles with a functional silane (3-glycidoxypropyl trimethoxysilane) and subsequent binding of the polysiloxane shell by the amine/imine groups of PHMBG. The encapsulated core-shell particles possess a high saturation magnetization, which is preserved for more than 10 months while in contact with air in aqueous suspensions. The minimum inhibitory concentration (MIC) of the encapsulated particles for eight types of bacteria was size-dependent, with polydisperse submillimeter particles possessing a several-fold higher MIC than analogous particles sized below 250 nm. The encapsulated particles are biocompatible and nontoxic to mammalian cells such as mouse fibroblasts. The particles efficiently bind both glycopeptide components mimicking the gram-positive bacteria membranes and whole bacteria, and possess broad-range bactericidal activity. The cell-particle complexes can be captured, manipulated, and removed by means of a magnet.