Preparative purification of gentamicin components using high-speed counter-current chromatography coupled with electrospray mass spectrometry

We developed a useful and preparative method based on high-speed counter-current chromatography with mass spectrometry (HSCCC/MS) to purify gentamicin C1a, C2/2a and C1 from standard powder. The analytes were purified on the HSCCC model CCC-1000 (multi-layer coil planet centrifuge) with a volatile two-phase solvent system composed of n-butanol/10% aqueous ammonia solution (50:50, v/v) and detected on an LCMS-2020EV quadrupole mass spectrometer fitted with an electrospray ionization (ESI) source system in positive ionization following scan mode (m/z 100-500). The HSCCC/ESI-MS peaks indicated that gentamicin C1a (m/z 450: [M+H](+)), C2/2a (m/z 464: [M+H](+)) and C1 (m/z 478: [M+H](+)) have the peak resolution values of 1.3 and 1.7 from 30 mg of loaded gentamicin powder. The HSCCC yielded 3.9 mg of gentamicin C1a, 12.6 mg of gentamicin C2/2a and 12.0 mg of gentamicin C1. These purified substances were analyzed by LC/MS with scan positive-mode. Based on the LC/MS chromatograms and spectra of the fractions, analytes were estimated to be over 95% pure. These gentamicin isomers of C1a, C2/2a and C1 were evaluated for their antibacterial activities. The overall results indicate that this approach of HSCCC/MS is a powerful technique for the purification of gentamicin components.     

High-throughput and simultaneous analysis of eight central-acting muscle relaxants in human plasma by ultra-performance liquid chromatography–tandem mass spectrometry in the positive and negative ionization modes

In this report, a high-throughput and sensitive method for analysis of eight central-acting muscle relaxants in human plasma by ultra-performance liquid chromatography–tandem mass spectrometry (UPLC-MS/MS) in the positive and negative ionization modes using tolbutamide as internal standard is presented. After pretreatment of a plasma sample by solid-phase extraction with an Oasis HLB cartridge, muscle relaxants were analyzed by UPLC with Acquity UPLC BEH C₁₈ column and Acquity TQD tandem quadrupole mass spectrometer equipped with an electrospray ionization interface. The calibration curves for muscle relaxants spiked into human plasma equally showed good linearities in the nanogram per milliliter order range. The detection limits (signal-to-noise ratio = 3) was as low as 0.1–2 ng/mL. The method gave satisfactory recovery rates, accuracy, and precision for quality control samples spiked with muscle relaxants. To further validate the present method, 250 mg of chlorphenesin carbamate was orally administered to a healthy male volunteer, and the concentrations of chlorphenesin carbamate in plasma were measured 0.5, 1, 2, 4, 6, and 8 h after dosing; their concentrations in human plasma were between 0.62 and 2.44 μg/mL. To our knowledge, this is the first report describing simultaneous analysis of over more than two central-acting muscle relaxants by liquid chromatography–tandem mass spectrometry. This has been realized by the capability of our instrument for simultaneous multiple reaction monitoring of the target compounds in both positive and negative ionization modes. Therefore, the present method seems very useful in forensic and clinical toxicology and pharmacokinetic studies.     

Synthesis of mono- and 1,3-diaminocalix[4]arenes via Ullmann-type amination and amidation of 1,3-bistriflate esters of calix[4]arenes

Practical methods are described for the preparation of monoamines 4 and 1,3-diamines 5, bearing one or two amino group(s) instead of the hydroxy group(s) at the 28-position or at both the 26- and 28-positions of p-tert-butylcalix[4]arene (1a) and p-tert-butylthiacalix[4]arene (1b), via the Ullmann-type amination or amidation. Thus, the copper-catalyzed or mediated amination of the 1,3-bistriflate ester (2a) of 1a with benzylamine affords either mono(benzylamino) triflate 7a or 1,3-bis(benzylamine) 8 in a high yield, depending on the reaction conditions. On the other hand, the 1,3-bistriflate ester (2b) of 1b resists disubstitution and produces, under stoichiometric conditions, mono(benzylamino) triflate 7b. The disubstitution of 2b is achieved by amidation with tosylamide, giving 1,3-bis(tosylamide) 17b. The hydrogenolysis of the benzylamino moiety of 7a, followed by the hydrolysis of the Tf moiety, affords monoamine 4a, while the hydrogenolysis of 8 affords 1,3-diamine 5a. The amino moiety of 7b can be deprotected under acidic conditions to give, after hydrolysis, monoamine 4b. The hydrolysis of 17b affords 1,3-diamine 5b. The overall yields of compounds 4a, 4b, 5a, and 5b are 72%, 45%, 78%, and 24%, respectively, based on commercially available compounds 1 and are much higher than the ones previously reported in the literature.     

Metabolism of gentiopicroside (gentiopicrin) by human intestinal bacteria

As a part of our studies on the metabolism of crude drug components by intestinal bacteria, gentiopicroside (a secoiridoid glucoside isolated from Gentiana lutea), was anaerobically incubated with various defined strains of human intestinal bacteria. Many species had ability to transform it to a series of metabolites. Among them, Veillonella parvula ss parvula produced five metabolites, which were identified as erythrocentaurin, gentiopicral, 5-hydroxymethylisochroman-1-one,5-hydroxymethylisochromen-1- one and trans-5,6-dihydro-5-hydroxymethyl-6-methyl-1H,3H-pyrano[3,4-c]pyra n-1-one.     

Development of copolymer of CR-39 with high sensitivity to low let particles

Several types of copolymers of CR-39 were prepared to find its usefulness as a nuclear track detector of high sensitivity. Track responses of these copolymers were investigated by irradiating energetic ions from proton through Ar. The copolymer of CR-39 monomer with N-isopropylacrylamide (NIPAAm) shows higher sensitivity than that of pure CR-39 for low LET particles such as protons. Preliminary results are reported for the track responses of copolymers (CR-39/NIPAAm) with various contents of NIPAAm as well as the etching properties.     

Control of island formation using overgrowth technique on cleaved edges of strained multiple quantum wells and selective epitaxy on patterned substrates

Two approaches to control the position and the size of semiconductor islands are proposed. The first method is to perform overgrowth on a cleaved edge of strained multiple quantum wells which acts as a substrate with a periodically modulated lattice constant, thus inducing a periodic strain to the overgrown layer. The second method is to selectively grow islands in specific windows defined by electron beam lithography. Both the methods are applied to the Ge/Si system and the controllability of the Ge island formation is demonstrated.     

Indices of refraction of ZnS,ZnSe, ZnTe,CdS, and CdTe in the far infrared

The indices of refraction of pure ZnS, ZnSe and ZnTe at 2, 80, and 300°K have been measured in the spectral region from 10 to 100 cm^-1. The indices of refraction can be described by the simple dispersion formula for an undamped harmonic oscillator. The static dielectric constants of these materials are obtained from the best fit parameters using a simple dispersion equation. The average indices of refraction of pure CdS and CdTe at 5°K in the spectral region from 10 to 100 cm^-1 have also been measured.