Spectroscopic characterization and theoretical simulation of 1,4-diallylquinoxaline-2,3-dione self dimer

Room temperature UV-vis absorption and emission spectra of the 1,4-diallylquinoxaline-2,3-dione (DAQX) are measured in solution at different concentrations. Even at very low concentration (approximately 10(-7)M), DAQX is shown to form ground state van der Waals dimers and excited dimers. These later species do not seem to rearrange into an excimer geometry. The theoretical simulation of the dimer, performed using the analytical atom-atom pair potential described below, predicts a non sandwich face-to-reverse slipped structure with head-to-tail orientation. The allowed absorption transitions, calculated using ZINDO/S package, reproduce satisfactory the experimental spectrum for both the monomer and the simulated dimer.     

Electrospray ionization mass spectrometry of a novel family of complexes in which various nitroso compounds are stabilized via coordination to [IrCl5]2-

Electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (ESI-MS/MS) data of a unique family of complexes of nitroso compounds coordinated to pentachloroiridate(III), [Cl5IrN(O)XR]2- (X=NH, S, CH and R=alkyl, aryl) are presented. These novel complexes are obtained by nucleophilic attack of primary amines, thiols. and alkenes to the coordinated nitrosyl. Despite their lability and low volatility, MS analysis of complexes of the type MN(O)X was done for the first time, complementing other spectroscopic techniques. The intrinsic dissociation chemistry of the gaseous diagnostic ions was studied via ESI-MS/MS and found to be very useful to confirm the proposed connectivities of the parent complexes. In particular, ESI-MS of their solutions allows the detection of series of diagnostic ions, mainly, [M-Cl]-, [M+K]-, [M-NO]-*, and [M-Cl+AcN]- (AcN=acetonitrile), which confirmed the identity of the analyzed complexes to be M=[Cl5IrN(O)XR]2-. Major fragments were formed by losses of NO or N(O)XR. ESI-MS and ESI-MS/MS measurements are therefore shown to be the proper techniques to complement the spectroscopic characterization of this important class of nitroso complexes. An interesting rearrangement that does not take place in solution was observed in the gaseous phase, and a plausible mechanism is discussed.     

Photo-induced destruction of giant vesicles in methylene blue solutions

We study the photodecomposition of phospholipid bilayers in aqueous solutions of methylene blue. Observation of giant unilamellar vesicles under an optical microscope reveals a consistent pattern of membrane disruption as a function of methylene blue concentration and photon density for different substrates supporting the vesicles.     

Capillary electrophoresis with end-capillary potentiometric detection using a copper electrode.

Potentiometric end-capillary detection in capillary electrophoresis has the advantage of relatively easy miniaturisation without having to compromise the concentration sensitivity. Potentiometric end-capillary detection using a copper electrode is also attractive because of the sensitive detection of many inorganic and organic UV-transparent ions and the ability to work in both direct and indirect mode. In this work, detection of a number of common anions in a tartrate electrolyte at pH 3 was studied. The influence of the end-capillary detection geometry on the detection performance was investigated. An end-capillary detection cell allowing the separation capillary to be changed without the need to realign the detection electrode was constructed and fitted into a commercial CE apparatus. Under the optimal configuration, which was a 25 microm diameter copper electrode aligned coaxially with a 25 microm capillary and positioned at a distance of about 25 microm from the capillary end, excellent peak shapes were achieved and comparison with simultaneous on-capillary photometric detection showed no additional peak broadening. Good sensitivity was obtained, resulting in concentration limits of detection (LODs) in the low microM range and mass LODs in the low amol range. Examples of separations of inorganic and organic anions are presented and the analytical potential of the detection method is assessed.     

On the Additive Group Structure of the Nonstandard Models of the Theory of Integers

Let $\hat \mathbb{Z}$ denote the inverse limit of all finite cyclic groups. Let F, G and H be abelian groups with H ≤ G. Let FβH denote the abelian group (F × H, +^β), where +^βis defined by (a, x) +^β (b, y) = (a + b, x + y + β(a) + β(b) — β(a + b)) for a certain β : F → G linear mod H meaning that β(0) = 0 and β(a) + β(b) — β(a + b) ∈ H for all a, b in F. In this paper we show that the following hold: (1) The additive group of any nonstandard model ℤ* of the ring ℤ is isomorphic to (ℤ*₊/H)βH for a certain β : ℤ*₊/H → $\hat \mathbb{Z}$ linear mod H. (2) $\hat \mathbb{Z}$ is isomorphic to (ℤ₊/H )βH for some β : $\hat \mathbb{Z}$/H →ℚ linear mod H, though $\hat \mathbb{Z}$ is not the additive group of any model of Th(ℤ, +, ×) and the exact sequence H → $\hat \mathbb{Z}$ → $\hat \mathbb{Z}$/H is not splitting.     

Chitosan loaded with silver nanoparticles,CS‐AgNPs,using thymus syriacus,wild mint,and rosemary essential oil extracts as reducing and capping agents

The present study describes the green method for the preparation of chitosan loaded with silver nanoparticles (CS‐AgNPs) in the presence of 3 different extracted essential oils. The essential oils play dual roles as reductant and capping agents. The reducing power and DPPH (2,2‐diphenyl‐1‐picrylhydrazyl) assay for the 3 essential oils—Thymus syriacus (T), wild mint (M), and rosemary (R)—have been reported. The preparation of CS‐AgNPs was performed by 2 steps. The 3 previously extracted essential oils have been used as reducing and capping agent in the first step, while in the second step, silver nanoparticles were integrated in chitosan. The integration of AgNPs in the structure of chitosan was confirmed by ultraviolet‐visible, Fourier transform infrared spectroscopy, scanning electron microscopy techniques, and energy dispersive X‐ray. Surface plasmon resonance confirmed the formation of CS‐AgNPs with maximum absorbance at λ_max between 405 ‐ 410 and 410 ‐ 430 nm for colloidal and films of CS‐AgNPs, respectively. The intensity of bands at 3408 cm^?1 in the fourier transform infrared spectroscopy measurements was decreased substantially and shifted slightly to lower frequency (?υ = 43 cm^?1). Scanning electron microscopy shows a spherical morphology of AgNPs with size of 62 nm for both colloidal and film samples, and energy dispersive X‐ray analysis shows peaks confirming AgNPs formation.     

Silica nanoparticle-templated methacrylic acid monoliths for in-line solid-phase extraction–capillary electrophoresis of basic analytes

Polymeric ion-exchange monoliths typically exhibit low capacities due to the limited surface area on the globules of the monoliths. The ion-exchange binding of protonated weakly basic analytes on deprotonated carboxylate sites on methacrylate polymer monoliths has been increased by templating the monoliths with silica nanoparticles. The templating method is achieved by adding the nanoparticles as a suspension to the polymerisation mixture. After polymerisation, the nanoparticles are removed by washing the monolith with strong base. Monolithic columns prepared using this procedure have exhibited a 33-fold increase in ion-exchange capacity when compared to untemplated monoliths prepared and treated under similar conditions. The templating procedure does not alter the macroporous properties of the polymer monolith, confirmed through scanning electron microscopy and BET surface area analysis, but provides increased capacity predominantly through the re-orientation of more carboxylic acid groups. The resulting increase in ion-exchange capacity has proven to be useful for the preconcentration and separation of neurotransmitters by in-line solid-phase extraction–capillary electrophoresis. The increased capacity of the templated monolith allowed the injection time to be increased 10 times over that of an untemplated monolith, allowing 10 times more sample to be injected with the efficiencies and recoveries remaining unaffected. The enhancement in sensitivity for the test mixture of neurotransmitter (dopamine, norepinephrine and metanephrine) ranged 1500–1900 compared to a normal hydrodynamic injection in capillary electrophoresis. Efficiencies obtained for the neurotransmitters were 100 000–260 000 plates, typical of those obtained in capillary zone electrophoresis. The applicability of the increased capacity silica nano-templated polymer monolith was demonstrated by analysing trace levels of caffeine in biological, food and environmental samples.     

Counter-flow electrokinetic supercharging for the determination of non-steroidal anti-inflammatory drugs in water samples

Electrokinetic supercharging (EKS) has been used in the last few years as a powerful tool for separation and on-line preconcentration of different types of analytes. We have developed a valuable modification for EKS system, namely counter-flow EKS (CF-EKS) and applied it for the separation and on-line preconcentration of seven non-steroidal anti-inflammatory drugs (NSAIDs) in water samples. In CF-EKS, a hydrodynamic counter-flow is applied during electrokinetic injection of the analytes within the EKS system. This counter-flow minimises the introduction of the sample matrix into the capillary, allowing longer injections to be performed. Careful choice of the optimum counter-flow as well as the optimum injection voltage allowed the sensitivity to be enhanced by 11,800-fold, giving limits of detection (LODs) of 10.7–47.0 ng/L for the selected NSAIDs. The developed method was validated and then applied for the determination of the studied NSAIDs in drinking water as well as wastewater samples from Hobart city.     

Fast ion chromatography using short anion exchange columns

A fast ion chromatographic system is described which uses shorter column lengths and compares various eluent profiles in order to maximise the performance without sacrificing the chromatographic resolution. Both isocratic and gradient elution profiles were considered to find the most efficient mode of separation. The separation and determination of seven target anions (chloride, chlorate, nitrate, chromate, sulfate, thiocyanate and perchlorate) was achieved using a short (4 mm ID, 50 mm long) column packed with Dionex AS20 high-capacity anion exchange material. A hydroxide eluent was used at an initial concentration of 25 mM (at a flow-rate of 1.0 mL/min) and two performance maxima were found. The maximum efficiency occurred at a normalised gradient ramp rate of 5 mM/t₀, resulting in a peak capacity of 16, while the fastest separation (<3 min) occurred at a normalised ramp rate of 30 mM/t₀. The retention time, peak width and resolution using the different eluent profiles on varying column lengths is also compared. Further investigations in this study determined that the highest peak capacity separation under gradient conditions could be approximated using an isocratic separation. The advantage of using this novel approach to approximate the maximum efficiency separation removes the need for column re-equilibration that is required for gradient elution resulting in faster analyses and enhanced sample throughput, with benefits in particular for multidimensional chromatography.     

Three‐dimensional framework structures: isomorphous bis(2,6‐diamino‐3,5‐dibromopyridinium) tetrabromidometallate(II) salts with CdII and MnII

In the structural motifs of two isomorphous triclinic salts, (C₅H₆Br₂N₃)₂[MBr₄] (M = Cd^II and Mn^II), each [MBr₄]²⁻ anion interacts with eight surrounding 2,6‐diamino‐3,5‐dibromopyridinium cations through intermolecular C/N—H...Br and Br...Br interactions, leading to a three‐dimensional framework structure. The cations show a minor degree of π–π stacking, adding extra stability to the three‐dimensional architecture.