Polarization control and sensing with two-dimensional coupled photonic crystal microcavity arrays

We have experimentally studied polarization properties of the two-dimensional coupled photonic crystal microcavity arrays and observed a strong polarization dependence of the transmission and reflection of light from the structures-effects that can be employed in building miniaturized polarizing optical components. Moreover, by combining these properties with a strong sensitivity of the coupled bands on the surrounding refractive index, we have demonstrated a detection of small refractive-index changes in the environment, which is useful for construction of biochemical sensors.     

Approximate expressions for viscous attenuation in marine sediments: relating Biot's "critical" and "peak" frequencies

Simple approximate relations are proposed for the viscous attenuation per cycle of the fast compressional and shear waves in the low-to-intermediate frequency range. Corresponding closed-form formulas are derived for frequencies at which maximum viscous attenuation per cycle occurs according to the Biot-Stoll theory of elastic wave propagation in marine sediments. In the new formulas, Biot's approximation [M. A. Biot, J. Acoust. Soc. Am. 34, 1254-1264 (1962)] for the frequency-dependent viscosity correction factor F(f) and the assumption of relatively low specific loss (Q(-1)<(0.2) [J. Geertsma and D. C. Smith, Geophysics 26(2), 169-181 (1962)] are used to provide an accurate representation of the fast compressional and shear wave attenuation from low frequencies through a transition region extending to two or three times Biot's critical frequency f(c). The approximate viscodynamic behavior of marine sediments for the fast compressional and shear waves shows similarities to that of a "homogeneous relaxation" process for an anelastic linear element [A. M. Freudenthal and H. Geiringer, Encyclopedia of Physics (Springer-Verlag. 1958), Vol. 6].     

The effect of nitrogen atom on double bond pyramidalization

The title compound 6-phenyl-4,6,8-triazatetracyclo[9.2.1.0^2,10.0^4,8]tetradec-2(10)-ene-5,7-dione (6) has been synthesized by the addition of 4-phenyl-1,2,4-triazole-3,5-dione (PTAD) to 2,3-dimethylenebicyclo[2.2.1]heptane. The cell parameters are a = 9.991(5), b = 11.754(9), c = 6.549(5) Å, = 101.08(7)°, = 103.31(5)°, = 98.24(5)°. The crystal structure of 6 was determined. The obtained geometrical parameters were highly correlated with the DFT calculations. The experimentally determined folding angle of the double bond was found to be 8.44°. The effect of the electron-withdrawing ability of nitrogen atom on the degree of pyramidalization is discussed.     

Coherence of acoustic modes propagating through shallow water internal waves

The 1995 Shallow Water Acoustics in a Random Medium (SWARM) experiment [Apel et al., IEEE J. Ocean. Eng. 22, 445-464 (1997)] was conducted off the New Jersey coast. The experiment featured two well-populated vertical receiving arrays, which permitted the measured acoustic field to be decomposed into its normal modes. The decomposition was repeated for successive transmissions allowing the amplitude of each mode to be tracked. The modal amplitudes were observed to decorrelate with time scales on the order of 100 s [Headrick et al., J. Acoust. Soc. Am. 107(1), 201-220 (2000)]. In the present work, a theoretical model is proposed to explain the observed decorrelation. Packets of intense internal waves are modeled as coherent structures moving along the acoustic propagation path without changing shape. The packets cause mode coupling and their motion results in a changing acoustic interference pattern. The model is consistent with the rapid decorrelation observed in SWARM. The model also predicts the observed partial recorrelation of the field at longer time scales. The model is first tested in simple continuous-wave simulations using canonical representations for the internal waves. More detailed time-domain simulations are presented mimicking the situation in SWARM. Modeling results are compared to experimental data.     

Minute amounts of organically modified montmorillonite improve the properties of polyisobutylene‐based polyurethanes

We discovered that polyisobutylene (PIB)‐based polyurethanes (PIB‐PUs) containing minute amounts (0.5%) of chemically bound organically modified montmorillonite (OmMMT) surprisingly produce films exhibiting improved properties. The OmMMT was prepared by reacting sodium montmorillonite (Na⁺MMT^?) with quaternary ammonium salts of a tertiary amine carrying a ? NH₂ functionality. The positively charged quaternary amine group becomes electrostatically attached to negatively charged MMT layers and defoliates it, whereas the free ? NH₂ group reacts with diisocyanates and acts as an additional chain extender. Thus, when OmMMT is added to a mixture of ingredients assembled for the synthesis of PIB‐PUs, this modified clay becomes an integral part of the PU. Specifically, we found that the integration of 0.5% OmMMT to PIB‐based PUs produces films with significantly enhanced tensile strength, elongation, toughness, creep, and stress relaxation relative to that of PIB‐PUs. The findings were discussed and explained in terms of a proposed morphology for the nanocomposite. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4076–4087     

Cellulose/cysteine based thiol-ene UV cured adsorbent: removal of silver (I) ions from aqueous solution

Cellulose - In the present study, a novel, eco-friendly, and simple polymeric adsorbent was obtained from cellulose acetate butyrate (CAB) and cysteine (Cys) to remove silver (I) ions in the...     

Synthesis of a novel macroinimer based on thiophene and poly(ε‐caprolactone) and its use in electrochromic device application

Synthesis of a novel macroinimer comprising poly(ε‐caprolactone) (PCL) and thiophene (Th) and its use in electrochromic device (ECD) application have been reported. First, a novel Th monomer ( 5 ) with miktofuntional initiator groups (primary hydroxyl and tertiary bromide at the third position of the thiophene ring) was synthesized in a four‐step reaction sequence. Density functional theory‐predicted bond lengths, angles, and vibrations of 5 were in good agreement with available experimental vibrational spectra. Subsequently, ring‐opening polymerization of ε‐caprolactone (ε‐CL) was carried out in bulk using 5 as the initiator and tin(II) 2‐ethylhexanoate (Sn(Oct)₂) as the catalyst at 115 °C, which led to α‐thiophene end‐capped PCL macroinimer (PCL‐Th). Furthermore, PCL‐Th macroinimer was used in electrochemical copolymerization with pyrrole (Py) and Th. PCL‐Th/PTh copolymer film synthesized on indium tin oxide‐coated glass slide showed electrochromic behavior. Optical analyses of the PCL‐Th/PTh copolymer film indicated that the copolymer film was suitable to be used as an anodically coloring material for ECD applications. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

The Synthesis of Novel S-, S,S-, S,S,S-, and N,S-Substituted Nitrodienes from Polyhalonitrodienes and Thiols

Abstract

The novel S-, S,S-, and S,S,S-substituted nitrobutadienes were synthesized from the reactions of 2-nitrobutadiene compounds with some thiols. The new N,S-substituted nitrobutadienes were obtained from the reaction of the mono-thiosubstituted butadienes with morpholine, thiomorpholine, homopiperazine, and piperazine derivatives. The structures of new compounds were determined by spectroscopic techniques.

GRAPHICAL ABSTRACT