Design,fabrication and characterization of a Schottky diode on an AlGaAs/GaAs HEMT structure for on-chip RF power detection

A Schottky diode was designed and fabricated on an n-AlGaAs/GaAs high electron mobility transistor (HEMT) structure for RF power detection. The processing steps used in the fabrication were the conventional steps used in standard GaAs processing. Current–voltage measurements showed that the devices had rectifying properties with a barrier height of 0.5289–0.5468 eV. The fabricated Schottky diodes detected RF signals well and their cut-off frequencies up to 20 GHz were estimated in direct injection experiments. To achieve a high cut-off frequency, a smaller Schottky contact area is required. The feasibility of direct integration with the planar dipole antenna via a coplanar waveguide transmission line without insertion of matching circuits was discussed. A higher cut-off frequency can also be achieved by reducing the length of the coplanar waveguide transmission line. These preliminary results represent a breakthrough as regards direct on-chip integration technology, towards the realization of a ubiquitous network society.     

Structural, optical and electrical properties of ZnO/Zn2GeO4 porous-like thin film and wires

Zinc oxide/zinc germanium oxide (ZnO/Zn₂GeO₄) porous-like thin film and wires has been fabricated by simple thermal evaporation method at temperature about 1120 °C for 2.5 h. The structural and optical properties of the porous-like-thin film and wires have been investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD) and photoluminescence (PL) spectroscopy. Metal semiconductor metal (MSM) photodetector structure was used to evaluate the electrical characteristics by using current-voltage (I-V) measurements. Room temperature photoluminescence spectrum of the sample shows one prominent ultraviolet peak at 378 nm and a shoulder at 370 nm. In addition, broad visible blue emission peak at wavelength 480 nm and green emission peak at 500 nm are also observed. Strong photoelectric properties of the MSM in the UV demonstrated that the porous-like-thin film and wires contribute to its photosensitivity and therefore making ZnO/Zn₂GeO₄ wires potential photodetector in the shorter wavelength applications.     

Effects of sintering temperature on grain growth and the complex permeability of Co0.2Ni0.3Zn0.5Fe2O4 material prepared using mechanically alloyed nanoparticles

Nanoparticle-sized Co_0.2Ni_0.3Zn_0.5Fe₂O₄ was prepared using mechanical alloying and sintering. The starting raw materials were milled in air and subsequently sintered at various temperatures from 600 to 1300 °C. The effects of sintering temperature on physical, magnetic and electrical characteristics were studied. The complex permittivity and permeability were investigated in the frequency range 10 MHz to 1.0 GHz. The results show that single phase Co_0.2Ni_0.3Zn_0.5Fe₂O₄ could not be formed during milling alone and therefore requires sintering. The crystallization of the ferrite sample increases with increasing sintering temperature; which decrease the porosity and increase the density, crystallite size and the shrinkage of the material. The maximum magnetization value of 83.1 emu/g was obtained for a sample sintered at 1200 °C, while both the retentivity and the coercivity decrease with increasing the sintering temperature. The permeability values vary with both the sintering temperature and the frequency and the absolute value of the permeability decreased after the natural resonance frequency. The real part of the permittivity was constant within the measured frequency, while the loss tangent values decreased gradually with increasing frequency.     

The Effects of Polyphenol,Tannic Acid,or Tannic Acid in Combination with Pamidronate on Human Osteoblast Cell Line Metabolism

Background: This study investigates the effect of tannic acid (TA) combined with pamidronate (PAM) on a human osteoblast cell line. Methods: EC₅₀ for TA, PAM, and different combination ratios of TA and PAM (25:75, 50:50, 75:25) were measured by 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay. The combination index value was utilized to analyze the degree of drug interaction, while trypan blue assay was applied to analyze the cells proliferation effect. The mineralization and detection of bone BSP and Osx genes were determined via histochemical staining and PCR test, respectively. Results: The EC₅₀ of osteoblasts treated with TA and a 75:25 ratio of TA and PAM were more potent with lower EC₅₀ at 0.56 µg/mL and 0.48 µg/mL, respectively. The combination of TA and PAM (75:25) was shown to have synergistic interaction. On Day 7, both TA and PAM groups showed significantly increased proliferation compared with control and combination groups. On Day 7, both the TA and combination-treated groups demonstrated a higher production of calcium deposits than the control and PAM-treated groups. Moreover, on Day 7, the combination-treated group showed a significantly higher expression of BSP and Osx genes than both the TA and PAM groups. Conclusion: Combination treatment of TA and PAM at 75:25 ameliorated the highest enhancement of osteoblast proliferation and mineralization as well as caused a high expression of BSP and Osx genes.     

Synthesis of methyl epijasmonate and cis-3-(2-oxopropyl)-2-(pent-2Z-enyl)-cyclopentan-1-one

A novel and efficient synthesis of both (±)-methyl epijasmonate and (±)-cis-3-(2-oxopropyl)-2-(pent-2Z-enyl)-cyclopentan-1-one is described. The key step to establish the cis-stereochemistry on the 5-membered ring is an ionic Diels–Alder reaction, which is high yielding and highly regioselective. Subsequent key steps include oxidative cleavage of the six-membered ring, Wittig coupling and for the synthesis of epijasmonate, the haloform reaction.     

Dynamics of the Hantavirus infection through variational iteration method

This paper studies the dynamics of the Hantavirus infection model, which was originally developed by Abramson and Kenkre [G. Abramson, V.M. Kenkre, Spatiotemporal patterns in the hantavirus infection, Phys. Rev. E 66 (2002) 011912], by using a simple analytical method called the variational iteration method or VIM. The results obtained by the variational iteration method are compared with the classical Runge–Kutta method (fourth-order) to gauge its effectiveness. Numerical values from these analyses provide us with some useful observation on the behaviour of the infection subjected to certain conditions.     

Vapor pressure measurements in the range 10 Pa to 1 Pa of four pentaerythritol esters: Density and vapor–liquid equilibria modeling of ester lubricants

Vapor pressures of four pure pentaerythritol esters, PE, pentaerythritol tetrapentanoate, pentaerythritol tetraheptanoate, pentaerythritol tetranonanoate and pentaerythritol tetra 2-ethylhexanoate were measured between 334 and 476 K in a recently developed gas saturation apparatus. The experimental vapor pressure values for the four polyolesters range from 5.6 × 10⁻⁵ Pa to 0.94 Pa. These data together with density values were used to determined SAFT and PC-SAFT characteristic parameters. The linearity of molecular parameters for both models with the molecular weight permits to interpolate and extrapolate these parameters for pentaerythritol ester with linear chains. For pentaerythritol esters with ethyl-alkanoic chains, the parameters of SAFT and PC-SAFT have been estimated assuming that the slope of these straight lines is the same for PEs with linear chains that for PE with branched chains. This procedure was used to predict density of commercial POEs, estimating the molecular weight when it is not available from the viscosity at 313.15 K. PC-SAFT gives better performances than SAFT to predict density data for these four compounds at high pressures and for other PEs at atmospheric pressure. Furthermore, characteristic parameters for Soave-Redlich-Kwong and Peng Robinson EoSs were also estimated from the experimental vapor pressures and literature density values.     

Solving systems of ODEs by homotopy analysis method

This paper applies the homotopy analysis method (HAM) to systems of ordinary differential equations (ODEs). The systems investigated include stiff systems, the chaotic Genesio system and the matrix Riccati-type differential equation. The HAM gives approximate analytical solutions which are of comparable accuracy to the seven- and eight-order Runge–Kutta method (RK78).     

Solution of fully developed free convection of a micropolar fluid in a vertical channel by homotopy analysis method

In this paper, we reconsider the problem of fully developed natural convection heat and mass transfer of a micropolar fluid in a vertical channel with asymmetric wall temperatures and concentrations. The resulting boundary‐value problem is solved analytically by the homotopy analysis method. The accuracy of the present solution is found to be in excellent agreement with the solutions of Cheng (Int. Commun. Heat Mass Transfer 2006; 33 :627–635). Copyright © 2008 John Wiley & Sons, Ltd.     

Synthesis,magnetic properties and microstructure of Ni–Zn ferrite by sol–gel technique

In the study, the Ni–Zn ferrite powder of a Ni_0.3Zn_0.7Fe₂O₄ composition was synthesized by sol–gel route using metal acetates at low temperatures. Both the scanning electron microscope and X-ray diffraction analyses of various gel samples heated at different temperatures were used to identify the reaction stages where the amorphous-gel-to-crystalline phase transition occurred. The electrical, magnetic and microstructural properties of the toroidal cores were studied. It was found that the initial permeability increased with a large frequency band (0.1–31.39 MHz) and the magnetic loss was small. The electrical resistivity was higher as compared to the ones which were obtained by the conventional process. Therefore, well–defined polycrystalline microstructure nickel–zinc ferrite and a short processing time of gel preparation have become the major achievements of this study.