Large volume preconcentration and purification for determining the240Pu/<Superscript>239</Superscript>Pu isotopic ratio and <Superscript>238</Superscript>Pu/<Superscript>239+240</Superscript>Pu alpha-activity ratio in seawater

Summary The present paper describes a new analytical method for determining the ²⁴⁰Pu/²³⁹Pu isotopic ratio and ²³⁸Pu/^239+240Pu α -activity ratio in seawater, both of which are important parameters for determining Pu sources in the ocean. Plutonium isotopes were preconcentrated from a large volume of seawater (4700-10800 liter) by solid phase extraction using MnO₂-impregnated fibers and eluted into 3M HCl. After the elution, the Pu species of all oxidation states were converted to Pu(IV) using NaNO₂, purified by solvent extraction using thenoyltrifluoroacetone (TTA)-benzene, and concentrated in 5 ml of 0.2M HNO₂. The ²⁴⁰Pu/²³⁹Pu and ²³⁸Pu/^239+240Pu ratios in the 5-ml final solution were determined by inductively coupled plasma-mass spectrometry (ICP-MS) and α-spectrometry, respectively. A pg level of Pu, which was a sufficiently large amount for the determination, was obtained by the solid phase extraction. Through the redox conversion and solvent extraction, the Pu species, such as Pu(III), Pu(IV) and Pu(VI), were collected at a high recovery of 96±2% (n=3) despite the presence of large amounts of Mn, and interfering ²³⁸U (3.3 μg^. l^-1in seawater) was effectively removed with a decontamination factor of 1.7·10⁷. The accuracy of the method for the ²⁴⁰Pu/²³⁹Pu ratio was verified using reference materials of seawater and a terrestrial soil sample. The present technique was applied to the determination of the ²⁴⁰Pu/²³⁹Pu and ²³⁸Pu/^239+240Pu ratios in coastal and oceanic water.     

PULSE RADIOLYSIS STUDIES IN MODEL LIPID SYSTEMS: FORMATION AND BEHAVIOR OF PEROXY RADICALS IN FATTY ACIDS

Abstract— Radiolytic formation and peroxidation of fatty acid radicals have been investigated by pulse radiolysis techniques in oleate, linoleate, linolenate and arachidonate systems. A strong absorption band at 280 nm associated with conjugated radicals, R_conj, formed in polyunsaturated fatty acid moieties has been used as a probe for kinetic processes occurring at doubly allylic sites in the hydrocarbon chain. Formation of R_conj by O^- has been found to be more efficient than the less selective OH radical. Peroxidation of R_conj is shown to be somewhat slower, ( k _R+ O₂˜ 3 × 10⁸ M ^-1 s^-1), than O₂ reactions with radicals in oleate ( k _R+ O₂= 1 × 10⁹ M ^-1 s^-1). Peroxy radicals generated in these reactions disappear slowly by essentially second order processes (2 k RO₁˜ 10⁷ M ^-1 s^-1). The superoxide radical, O^-₂, shows little if any reactivity towards 0.01 M linolenate or arachidonate over periods of 20 s.     

Basic peptides as functional components of non-viral gene transfer vehicles

Improving the performance of non-viral gene-delivery vehicles that consist of synthetic compounds and nucleic acids is a key to successful gene therapy. Supplementing synthetic vehicles with various biological functions by using natural or artificial peptides is a promising approach with which to achieve this goal. One of the obstacles hindering this effort is that some of the potentially useful peptides, especially those with many basic amino acid residues, interfere with the formation of the complex owing to strong electrostatic interactions with the nucleic acid. In this review, we describe our recent work in examining the potential of these peptides in gene delivery, using a recombinant lambda phage particle as the model for the gene-delivery complex. Lambda phage encapsulates large duplex DNA in a rigid polyplex-like shell with a diameter of 55 nm, and can display various peptides on this capsid, independently of particle formation. By examining the expression of marker genes encapsulated in the phage capsid, we have demonstrated that the protein transduction domain of HIV Tat protein and the nuclear localization signal derived from SV40 T antigen can remarkably facilitate the delivery of these marker genes across the two major barriers, the cell membrane and the nuclear membrane, respectively. Our results indicate that these basic peptides can constitute effective components of synthetic gene-transfer complexes, as long as sufficient copies are displayed on the outer surface of the complex.     

Reversible electro-optical switching of a memory type PDLC using two-frequency-addressing liquid crystals

Abstract

A memory type PDLC has been prepared by sandwiching a mixture of two-frequency-addressing liquid crystals and acrylate monomers with a hydoroxy group between two glass substrates with ITO electrodes followed by UV irradiation. This PDLC can be electrically switched between a transparent state and a light scattering state, which are maintained over several months without electric fields.     

Hybrid EuIII Coordination Luminophore Standing on Two Legs on Silica Nanoparticles for Enhanced Luminescence

In this study, we have demonstrated a two-legged, upright molecular design method for monochromatic and bright red luminescent Ln^III-silica nanomaterials. A novel Eu^III-silica hybrid nanoparticle was developed by using a doubly binding TPPO−Si(OEt)₃ (TPPO: triphenyl phosphine oxide) linker. The TPPO−Si(OEt)₃ was confirmed by ¹H, ³¹P, ²⁹Si NMR spectroscopy and single-crystal X-ray analysis. Luminescent Eu(hfa)₃ and Eu(tfc)₃ moieties (hfa: hexafluoroacetylacetonate, tfc: 3-(trifluoromethylhydroxymethylene)camphorate) were fixed onto TPPO−Si(OEt)₃-modified silica nanoparticles, producing Eu(hfa)₃(TPPO−Si)₂-SiO₂ and Eu(tfc)₃(TPPO−Si)₂-SiO₂, respectively. Eu(hfa)₃(TPPO−Si)₂−SiO₂ exhibited the higher intrinsic luminescence quantum yield (93 %) and longer emission lifetime (0.98 ms), which is much larger than those of previously reported Eu^III-based hybrid materials. Eu(tfc)₃(TPPO−Si)₂−SiO₂ showed an extra-large intrinsic emission quantum yield (54 %), although the emission quantum yield for the precursor Eu(tfc)₃(TPPO−Si(OEt)₃)₂ was found to be 39 %. These results confirmed that the TPPO−Si(OEt)₃ linker is a promising candidate for development of Eu^III-based luminescent materials.     

Near-IR Luminescent YbIII Coordination Polymers Composed of Pyrene Derivatives for Thermostable Oxygen Sensors

Oxygen-sensitive and near-infrared (NIR) luminescent Yb^III coordination polymers incorporating ligands based on pyrene derivatives were synthesized: Yb^III–TBAPy and Yb^III–TIAPy (TBAPy: 1,3,6,8-tetrakis(p-benzoate)pyrene; TIAPy: 1,3,6,8-tetrakis(3,5-isophthalic acid)pyrene). The coordination structures of these materials have been characterized by means of electrospray ionization mass spectrometry, X-ray diffraction analysis, and thermogravimetric analysis. Moreover, the porous structure of Yb^III–TIAPy has been evaluated by measuring its N₂ adsorption isotherm. The NIR luminescence properties of Yb^III–TBAPy and Yb^III–TIAPy have been examined by acquiring emission spectra and determining emission lifetimes under air or argon and in vacuo. Yb^III–TIAPy exhibited high thermal stability (with a decomposition temperature of 400 °C), intense luminescence (with an emission quantum yield under argon of 6.6 %), and effective oxygen-sensing characteristics. These results suggest that NIR luminescent Yb^III coordination polymers prepared using pyrene derivatives could have applications in novel thermo-stable oxygen sensors.     

Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751