Copper/Graphene/Clay Nanohybrid: A Highly Efficient Heterogeneous Nanocatalyst for the Synthesis of Novel 1,2,3‐Triazolyl Carboacyclic Nucleosides via ‘Click’ Huisgen 1,3‐Dipolar Cycloaddition

A very mild and highly efficient synthesis of some novel 1H‐1,2,3‐triazolyl carboacyclic nucleosides via a ‘Click’ Huisgen cycloaddition of N‐propargyl nucleobases and azido alcohols using Cu/aminoclay/reduced graphene oxide nanohybrid (Cu/AC/r‐GO nanohybrid) as nanocatalyst is described. The preparation and characterization of Cu/AC/r‐GO nanohybrid are discussed. This catalyst was characterized by X‐ray diffraction, FT‐IR, TEM, and energy‐dispersive analysis of X‐ray techniques. Cu/AC/r‐GO nanohybrid is a stable and highly efficient heterogeneous nanocatalyst that can be easily prepared, used, and restored from the reaction mixture by simple filtration, and reused for many consecutive trials without significant decrease in activity.     

Novel and Stereospecific Synthesis of (2S)‐3‐(2,4,5‐Trifluorophenyl)propane‐1,2‐diol from D‐Mannitol

A stereospecific synthesis of (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol from D ‐mannitol has been developed. The reaction of 2,3‐O‐isopropylidene‐D ‐glyceraldehyde with 2,4,5‐trifluorophenylmagnesium bromide gave [(4R)‐2,2‐dimethyl‐1,3‐dioxolan‐4‐yl](2,4,5‐trifluorophenyl)methanol in 65% yield as a mixture of diastereoisomers (1 : 1). The Ph₃P catalyzed reaction of the latter with C₂Cl₆ followed by reduction with Pd/C‐catalyzed hydrogenation gave (2S)‐3‐(2,4,5‐trifluorophenyl)propane‐1,2‐diol with >99% ee and 65% yield.     

A parametric investigation of the friction performance of PC‐ABS parts processed by FDM additive manufacturing process

The friction performance is an important factor of parts processed by fused deposition modeling (FDM) for various engineering applications. It is one type of failure made of surface contact. The proper use of FDM process parameters can bring a significant reduction in friction and the amount of wear, thereby leading to a reduction in the material waste. To date, very little studies have been performed in this area. This paper investigates the effect of FDM manufacturing parameters on the friction performance of polycarbonate‐acrylonitrile butadiene styrene prototypes processed by FDM using definitive screening design and partial least squares method. The observation of surface morphology was obtained by the scanning electron microscopy to examine the effect of process parameters on the microstructure. The experimental results have shown that layer thickness, air gap, raster angle, and build orientation are the most influential factors affecting the friction performance of FDM manufactured parts. The proposed approach presented in this study provides an impetus to develop analytical modeling and functional relationships between FDM manufacturing parameters and friction performance. Copyright © 2017 John Wiley & Sons, Ltd.     

Global optimization of general constrained grey-box models: new method and its application to constrained PDEs for pressure swing adsorption

This paper introduces a novel methodology for the global optimization of general constrained grey-box problems. A grey-box problem may contain a combination of black-box constraints and constraints with a known functional form. The novel features of this work include (i) the selection of initial samples through a subset selection optimization problem from a large number of faster low-fidelity model samples (when a low-fidelity model is available), (ii) the exploration of a diverse set of interpolating and non-interpolating functional forms for representing the objective function and each of the constraints, (iii) the global optimization of the parameter estimation of surrogate functions and the global optimization of the constrained grey-box formulation, and (iv) the updating of variable bounds based on a clustering technique. The performance of the algorithm is presented for a set of case studies representing an expensive non-linear algebraic partial differential equation simulation of a pressure swing adsorption system for \(\hbox {CO}_{2}\). We address three significant sources of variability and their effects on the consistency and reliability of the algorithm: (i) the initial sampling variability, (ii) the type of surrogate function, and (iii) global versus local optimization of the surrogate function parameter estimation and overall surrogate constrained grey-box problem. It is shown that globally optimizing the parameters in the parameter estimation model, and globally optimizing the constrained grey-box formulation has a significant impact on the performance. The effect of sampling variability is mitigated by a two-stage sampling approach which exploits information from reduced-order models. Finally, the proposed global optimization approach is compared to existing constrained derivative-free optimization algorithms.     

Existence of Solutions and Algorithms for Bilevel Vector Equilibrium Problems: An Auxiliary Principle Technique

The main goal of this paper is to introduce and study bilevel vector equilibrium problems. We first establish some existence results for solutions of vector equilibrium problems and mixed vector equilibrium problems. We study the existence of solutions of bilevel vector equilibrium problems by considering a vector Thikhonov-type regularization procedure. By using this regularization procedure and existence results for mixed vector equilibrium problems, we establish some existence results for solutions of bilevel vector equilibrium problems. By using the auxiliary principle, we propose an algorithm for finding the approximate solutions of bilevel vector equilibrium problems. The strong convergence of the proposed algorithm is also studied.     

Thermal-hydraulic performance of oval tubes in a cross-flow of air

The thermal-hydraulic performance of five oval tubes is experimentally investigated and compared with that for a circular tube in a cross-flow of air. The range of Reynolds numbers Re_D is approximately between 1,000 and 11,000. The nominal axis ratios R (major axis/minor axis) for three of the investigated oval tubes are 2, 3, and 4. Two other configurations of oval tubes are also tested, an oval tube R=3 with two wires soldered on its upper and lower top positions, and a cut-oval tube. The performance of the tubes is corrected for the effects of area blockage and turbulence intensity. The measurement results show that the mean Nusselt numbers Nu_D for the oval tubes are close to that for the circular tube for Re_D<4,000. For a higher Re_D, the Nu_D for the oval tubes is lower than that for the circular tube and it decreases with the increase in the axis ratio R. The drag coefficients C_d for the tubes are measured and the combined thermal-hydraulic performance is indicated by the ratio Nu_D/C_d, which shows a better combined performance for the oval tubes.     

Synthesis of enantiopure β-amino alcohols via AKR/ARO of epoxides using recyclable macrocyclic Cr(III) salen complexes

A series of chiral macrocyclic Cr(III) salen complexes 1-8 were synthesized and characterized. These complexes were found to be highly active, regio-, diastereo-, and enantioselective catalysts in aminolytic kinetic resolution (AKR) of racemic trans-epoxides as well as asymmetric ring opening (ARO) of prochiral meso-epoxides with various anilines as nucleophiles at room temperature in 18-24 h. Excellent yields (>99% with respect to the nucleophile) with high enantioselectivity (ee, >99%) of chiral anti-β-amino alcohols was achieved with concomitant recovery of corresponding epoxides in high ee (up to >99%). The complex 1 also catalyzed the ARO of meso-epoxides to provide corresponding syn-β-amino alcohols in high yield (99%) and ee (up to 91%). Due to built-in basic sites in the catalyst, no external base (as an additive) was required to promote AKR and ARO reactions. The catalyst 1 was conveniently recycled several times with retention of its performance. The AKR of trans-stilbene oxide with aniline was successfully demonstrated at relatively higher scale (10 mmol) using the catalyst 1.     

Bacteriocin release protein-mediated secretory expression of recombinant chalcone synthase in Escherichia coli

Flavonoids are secondary metabolites synthesized by plants shown to exhibit health benefits such as anti-inflammatory, antioxidant, and anti-tumor effects. Thus, due to the importance of this compound, several enzymes involved in the flavonoid pathway have been cloned and characterized in Escherichia coli. However, the formation of inclusion bodies has become a major disadvantage of this approach. As an alternative, chalcone synthase from Physcomitrella patens was secreted into the medium using a bacteriocin release protein expression vector. Secretion of P. patens chalcone synthase into the culture media was achieved by co-expression with a psW1 plasmid encoding bacteriocin release protein in E. coli Tuner (DE3) plysS. The optimized conditions, which include the incubation of cells for 20 h with 40 ng/ml mitomycin C at OD₆₀₀ induction time of 0.5 was found to be the best condition for chalcone synthase secretion.     

Reductive Alkylation Causes the Formation of a Molten Globule-Like Intermediate Structure in <Emphasis Type="Italic">Geobacillus zalihae</Emphasis> Strain T1 Thermostable Lipase

A thermostable lipase from Geobacillus zalihae strain T1 was chemically modified using propionaldehyde via reductive alkylation. The targeted alkylation sites were lysines, in which T1 lipase possessed 11 residues. Far-UV circular dichroism (CD) spectra of both native and alkylated enzyme showed a similar broad minimum between 208 and 222 nm, thus suggesting a substantial amount of secondary structures in modified enzyme, as compared with the corresponding native enzyme. The hydrolytic activity of the modified enzymes dropped drastically by nearly 15-fold upon chemical modification, despite both the native and modified form showed distinctive α-helical bands at 208 and 222 nm in CD spectra, leading us to the hypothesis of formation of a molten globule (MG)-like structure. As cooperative unfolding transitions were observed, the modified lipase was distinguished from the native state, in which the former possessed a denaturation temperature (T _m) in lower temperature range at 61 °C while the latter at 68 °C. This was further supported by 8-anilino-1-naphthalenesulfonic acid (ANS) probed fluorescence which indicated higher exposure of hydrophobic residues, consequential of chemical modification. Based on matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis, a small number of lysine residues were confirmed to be alkylated.