High-pressure hydrothermal crystal growth and multiferroic properties of a perovskite YMnO3

Orthorhombic perovskites RMnO(3) are representative of spin-driven ferroelectrics. When the radius of the rare-earth ion R is smaller than that of Dy, for instance in YMnO(3), the orthorhombic phase becomes metastable at ambient pressure, which impedes the crystal growth; thus, the detailed magnetic and multiferroic properties of the metastable phase have not been characterized. In this work, we successfully obtained single crystals of orthorhombic YMnO(3) using quasi-hydrothermal conditions under a high pressure of 5.5 GPa. Magnetic and dielectric measurements under magnetic fields revealed that the magnetic ground state is the commensurate E-type antiferromagnetic, while a cycloidal spin phase likely coexists in the intermediate temperature range, which enhances the magnetoelectric response to external fields.     

Liquid crystal gels cross-linked with 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzenes

A mixture of ω-(4-cyanobiphenyl-4′-yloxy)alkyl methacrylate and 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzene was heated to 200 °C at 5–10 °C/min. A large, broad exothermic transition peak was observed by differential scanning calorimetry during the first heating process. The transition indicated the formation of a networked polymer, which was then immersed for 24 h in various nematic liquid crystals, such as 4-cyano-4′-pentylbiphenyl, to give liquid crystal gels. The networked polymers and their corresponding liquid crystal gels exhibited different liquid crystal-isotropic transitions. The swelling behaviors of the liquid crystal gels were compared with those of gels cross-linked with 1,6-hexanediol dimethacrylate, trimethylpropane trimethacrylate, and pentaerythritol tetraacetate. The characteristics of liquid crystal gels cross-linked with 1,3,5-tris-(ω-methacryloyloxyalkyloxy)benzenes were studied.     

Thermal behavior of ternary Sm2Fe17Nx magnets

The Mössbauer spectra of Sm₂Fe₁₇N_x, prepared by the nitrogenation of Sm₂Fe₁₇ powders in an ammonia and hydrogen atmosphere, were observed at elevated temperatures to shed light on the thermal behavior of nitrogen in the compounds Sm₂Fe₁₇N_x. It was found that there were large differences in thermal behavior between the starting Sm₂Fe₁₇, crystalline Sm₂Fe₁₇N_x (x≈1.7) and amorphous Sm₂Fe₁₇N_x(x～7). The thermal decomposition behavior of Sm₂Fe₁₇N_3.2, developed as one of the most promising hard magnetic materials, was found to be different under different atmospheres.     

Chemistry of fullerene epoxides: synthesis, structure, and nucleophilic substitution-addition reactivity

Fullerene epoxides, C??O(n), having epoxide groups directly attached to the fullerene cage, constitute an interesting class of fullerene derivatives. In particular, the chemical transformations of fullerene epoxides are expected to play an important role in the development of functionalized fullerenes. This is because such transformations can readily afford a variety of mono- or polyfunctionalized fullerene derivatives while conserving the epoxy ring arrangement on the fullerene surface, as seen in representative regioisomeric fullerene polyepoxides. The first part of this review addresses the synthesis and structural characterization of fullerene epoxides. The formation of fullerene epoxides through different oxidation reactions is then explored. Adequate characterization of the isolated fullerene epoxides was achieved by concerted use of NMR and LC-MS techniques. The second part of this review addresses the substitution of fullerene epoxides in the presence of a Lewis acid catalyst. Most major substitution products have been isolated as pure compounds and their structures established through spectroscopic methods. The correlation between the structure of the substitution product and the oxygenation pattern of the starting materials allows elucidation of the mechanistic features of this transformation. This approach promises to lead to rigorous regioselective production of various fullerene derivatives for a wide range of applications.     

Phase-transfer behavior of cross-linked poly(acrylic acid) particles prepared by dispersion polymerization from ionic liquid to water

The phase-transfer behavior of poly(acrylic acid) (PAA) particles from the hydrophobic ionic liquid N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethanesulfonyl)amide phase to the water phase in the particle state, which we reported previously, was examined in more detail. PAA particles were prepared in the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([Bmim][TFSA]) and the organic solvent chloroform and were extracted. The transfer of PAA particles to water in the particle state was also observed in [Bmim][TFSA] systems. In contrast, the transfer phenomenon was not observed in the chloroform system. It was clarified that water/oil interfacial tension γ(wo) is an important parameter in the extraction of PAA in the particle state from the viewpoint of free energy. When the cationic surfactant tetradecyltrimethylammonium bromide, aqueous solution was used as the extraction medium, the PAA particles were extracted in the particle state from chloroform to water, in which γ(wo) became as low as that of the ionic liquid. This suggests that the phase-transfer phenomenon of PAA particles in the particle state was induced by the ionic liquid's unique property of low interfacial tension with water despite its high hydrophobic character.     

Highly enantioselective synthesis of silahelicenes using Ir-catalyzed [2+2+2] cycloaddition

Silahelicenes, which contain two silole moieties in a helically chiral structure, were synthesized by a chiral Ir-catalyzed intermolecular [2+2+2] cycloaddition of tetraynes with diynes along with a Ni-mediated intramolecular [2+2+2] cycloaddition. The photophysical properties of the obtained highly enantiomerically enriched silahelicenes (up to 93% ee) were also measured.     

A Theoretical study on the charge and discharge states of Na-ion battery cathode material,Na1+xFePO4F

Na₂FePO₄F is a promising cathode material for a Na-ion battery because of its high electronic capacity and good cycle performance. In this work, first principle calculations combined with cluster expansion and the Monte Carlo method have been applied to analyze the charge and discharge processes of Na₂FePO₄F by examining the voltage curve and the phase diagram. As a result of the density functional theory calculation and experimental verification with structural analysis, we found that the most stable structure of Na_1.5FePO₄F has the P2₁/b11 space group, which has not been reported to date. The estimated voltage curve has two clear plateaus caused by the two-phase structure composed of P2₁/b11 Na_1.5FePO₄F and Pbcn Na₂FePO₄F or Na₁FePO₄F and separated along the c-axis direction. The phase diagram shows the stability of the phase-separated structure. Considering that Na₂FePO₄F has diffusion paths in the a- and c-axis directions, Na₂FePO₄F has both innerphase and interphase diffusion paths. We suggest that the stable two-phase structure and the diffusion paths to both the innerphase and interphases are a key for the very clear plateau. We challenge to simulate a nonequilibrium state at high rate discharge with high temperature by introducing a coordinate-dependent chemical potential. The simulation shows agreement with the experimental discharge curve on the disappearance of the two plateaus. © 2018 Wiley Periodicals, Inc.     

Potential energy surfaces and nonadiabatic transitions in the asymptotic regions of ICN photodissociation to study the interference effects in the F1 and F2 spin-rotation levels of the CN products

One of the most spectacular yet unsolved problems for the ICN -band photodissociation is the non-statistical spin-rotation F₁ = N + 1/2 and F₂ = N − 1/2 populations for each rotation level N of the CN fragment. The F₁/F₂ population difference function f(N) exhibits strong N and λ dependences with an oscillatory behavior. Such details were found to critically depend on the number of open-channel product states, namely, whether both I (²P_3/2) and I (²P_1/2) are energetically available or not as the dissociation partner. First, in the asymptotic region, the exchange and dipole-quadrupole inter-fragment interactions were studied in detail. Then, as the diabatic basis, we took the appropriate symmetry adapted products of the electronic and rotational wavefunctions for the F₁ and F₂ levels at the dissociation limits. We found that the adiabatic Hamiltonian exhibits Rosen–Zener–Demkov type nonadiabatic transitions reflecting the switch between the exchange interaction and the small but finite spin-rotation interaction within CN at the asymptotic region. This non-crossing type nonadiabatic transition occurs with the probability 1/2, that is, at the diabatic limit through a sudden switch of the quantization axis for CN spin S from the dissociation axis to the CN rotation axis N . We have derived semiclassical formulae for f(N) and the orientation parameters with a two-state model including the 3A′ and 4A′ electronic states, and with a four-state model including the 3A′ through 6A′ electronic states. These two kinds of interfering models explain general features of the F₁ and F₂ level populations observed by Zare's group and Hall's group, respectively. © 2018 Wiley Periodicals, Inc.     

Structural confirmation of oligosaccharides newly isolated from sugar beet molasses

ABSTRACT: BACKGROUND: Sugar beet molasses is a viscous by-product of the processing of sugar beets into sugar. The molasses is known to contain sucrose and raffinose, a typical trisaccharide, with a well-established structure. Although sugar beet molasses contains various other oligosaccharides as well, the structures of those oligosaccharides have not been examined in detail. The purpose of this study was isolation and structural confirmation of these other oligosaccharides found in sugar beet molasses. RESULTS: Four oligosaccharides were newly isolated from sugar beet molasses using high-performance liquid chromatography (HPLC) and carbon-Celite column chromatography. Structural confirmation of the saccharides was provided by methylation analysis, matrix-assisted laser desorption/ionaization time of flight mass spectrometry (MALDI-TOF-MS), and nuclear magnetic resonance (NMR) measurements. CONCLUSION: The following oligosaccharides were identified in sugar beet molasses: beta-D-galactopyranosyl-(1- > 6)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named beta-planteose), alpha-D-galactopyranosyl-(1- > 1)-beta-D-fructofuranosyl-(2 <-> 1)-alpha-D-glucopyranoside (named1-planteose), alpha-D-glucopyranosyl-(1- > 6)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (theanderose), and beta-D-glucopyranosyl-(1- > 3)-alpha-D-glucopyranosyl-(1 <-> 2)-beta-D-fructofuranoside (laminaribiofructose). 1-planteose and laminaribiofructose were isolated from natural sources for the first time.     

Thermally stable polymer composites with improved transparency by using colloidal mesoporous silica nanoparticles as inorganic fillers

The colloidal mesoporous silica nanoparticles with small particle sizes (namely, CMS) are used as inorganic fillers of polymers (i.e. epoxy and silicone). From simple calculation, almost all polymers are estimated to be confined in the mesopores. To clarify the superiority of CMS over nonporous silica particles and mesoporous silica particles with much larger size (TMPS-4) as inorganic fillers, a systematic study on mechanical strength and transparency of polymer-silica nanocomposites was conducted. Compared with nonporous silica particles, similar to TMPS-4, CMS shows a greater effect on lowering the CTE. In addition, obtained polymer-CMS nanocomposites show improved transparency than polymer-TMPS-4 nanocomposites.