Alternating copolymer of thiophene andN‐(phenylethynyl)pyrrole. New π‐conjugated alternating five‐membered ring copolymer and its packing structure

An alternating copolymer, Copoly‐1 , of thiophene and N‐(phenylethynyl)pyrrole was prepared by palladium‐catalyzed polycondensation. Powder X‐ray diffraction (XRD) analysis indicated that Copoly‐1 formed a stacked packing structure with doubly‐running polymer main chains. Optical data support the molecular and packing structures of Copoly‐1 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2219–2224, 2005     

Formation of a new crystalline silicate structure by grafting dialkoxysilyl groups on layered octosilicate

Dialkoxydichlorosilanes ((RO)2SiCl2, R = alkyl) react almost completely with interlayer silanol groups in a layered silicate octosilicate to create a new crystalline silicate structure consisting of new five-membered rings arranged regularly on both sides of the silicate layers. The introduction of dialkoxysilyl groups to the interlamellar region of layered silicates with regular reaction sites provides a new methodology for the design and construction of novel crystalline silicate frameworks by a soft chemical route.     

Accurate mass measurement of low molecular weight compounds by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

We report the application of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for the accurate measurement of mass of low molecular weight compounds (smaller than 1500 Da), a linear peptide, two types of cyclic depsipeptides, a polyhydroxy-macrocyclic lactone, and two prenylated flavonoids, with delayed extraction in the reflector mode. The performance of the MALDI-TOF instrument was less than those of fast atom bombardment and Fourier-transform ion cyclotron resonance mass spectrometry instruments and insufficient to give acceptable accuracy for literature reporting. Nevertheless, when combined with NMR spectrometry and/or amino acid analysis to give information on the numbers of carbon atoms and index of hydrogen deficiency, MALDI was useful for determination of the elemental composition of the low molecular weight compounds available in small quantities.     

Distribution behavior of some drug enantiomers in an aqueous two-phase system using counter-current extraction with protein

Summary The partial resolution of some drug enantiomers by counter-current extraction in an aqueous two-phase system using bovine serum albumin (BSA) or ovomucoid (OVM) as chiral discriminator is described. The phase system was prepared with dextran 40, polyethylene glycol and a protein. Ofloxacin (OFLX) enantiomer was well recognized by the BSA system, whereas the enantiomers of carvedilol (-blocker) and DG-5128 (a new oral hypoglycaemic drug) were hardly recognized by the OVM system. The distribution coefficients of (S)-, (R)- and rac-OFLX varied with pH. Good enantioselectivity for OFLX was obtained at relatively high pH ( pH 9). The crude optically enriched OFLX enantiomers were extracted from the aqueous fractions and finally purified by thin-layer chromatography.     

Di-isotacticity of poly(methyl propenyl ether) and double-bond opening of methyl propenyl ether in cationic polymerization

The di-isotacticity of poly(methylpropenyl ether) obtained by the cationic polymerization has been studied by NMR spectra. The NMR spectra of β-methyl protons of the polymer are decoupled from the β-methine proton spectra to determine the di-isotactic fraction in a polymer. The signals of β-methyl protons at 8.78 and 8.89 τ are estimated as spectra based on threo- and erythro-di-isotactic diads, respectively. With BF₃·O(C₂H₅)₂ as a catalyst, the trans monomer yields a crystalline polymer and its structure is threo-di-isotactic. Otherwise, cis monomer produces an amorphous polymer, and it is a mixture of threo- and erythro-di-isotactic structure. From these results, it is concluded that the double bond in trans monomer is opened exclusively in the cis type, and in cis monomer cis- and trans-openings take place at almost the same rate.     

Diacetoxylation of conjugated dienes with thallium(III) acetate in acetic acid

The reaction of conjugated dienes such as 1,3-butadiene, isoprene, 2,3-dimethyl-1,3-butadiene, 2,5-dimethyl-2,4-hexadiene, 1,3-cyclopentadiene, and 1,3-cyclohexadiene, with thallium(III)acetate in acetic acid at 10–65° for 0.5–15 hr affords an isomeric mixture of the corresponding diacetoxyalkenes (1,2- and 1,4-addition products) in 10–92% yields. The 1,2-addition products are predominantly formed in all cases examined except the case of 1,3-cyclopentadiene. The reaction is assumed to proceed through acetoxythallation and dethallation steps, the latter step being accompanied and/or followed by an attack of acetoxyl group. An initial attack of thallium moiety is proposed to occur mainly at C-1 and C-2 carbons in the cases of linear terminal dienes and cyclic dienes, respectively.     

Ferromagnetic NiII-GdIII interactions in complexes with NiGd, NiGdNi, and NiGdGdNi cores supported by tripodal ligands

Dinuclear [(NiL)Gd(hfac)(2)(EtOH)](H(3)L = 1,1,1-tris(N-salicylideneaminomethyl)ethane, Hhfac = hexafluoroacetylacetone), trinuclear [(NiL)(2)Gd(NO(3))], and tetranuclear [(NiL)Gd(CH(3)CO(2))(2)(MeOH)](2) complexes, were prepared by treating [Ni(HL)] with [Gd(hfac)(3)(H(2)O)(2)], Gd(NO(3))(3).6H(2)O, and Gd(CH(3)CO(2))(3).4H(2)O, respectively, in the presence of Et(3)N. All the complexes show that ferromagnetic interactions occur between the Ni(II) and Gd(III) ions.     

Substrate dependence in aqueous Diels-Alder reactions of cyclohexadiene derivatives with 1,4-benzoquinone

A reactivity difference based on the position of substituents on cyclohexa-1,3- diene was observed for the title reaction. The effect of water as solvent was more distinct for 1-methyl-4-isopropylcyclohexa-1,3-diene than for 2-methyl-5-isopropylcyclohexa- 1,3-diene or non-substituted cyclohexa-1,3-diene. The effect of NaCl (salting-out) and guanidium chloride (salting-in) was also large for 1-methyl-4-isopropylcyclohexa-1,3- diene.     

Low temperature properties of acetonitrile confined in MCM-41

The effect of confinement on the phase changes and dynamics of acetonitrile in mesoporous MCM-41 was studied by use of adsorption, FT-IR, DSC, and quasi-elastic neutron scattering (QENS) measurements. Acetonitrile molecules in a monolayer interact strongly with surface hydroxyls to be registered and perturb the triple bond in the C[triple bond]N group. Adsorbed molecules above the monolayer through to the central part of the cylindrical pores are capillary condensed molecules (cc-acetonitrile), but they do not show the hysteresis loop in adsorption-desorption isotherms, i.e., second order capillary condensation. FT-IR measurements indicated that the condensed phase is very similar to the bulk liquid. The cc-acetonitrile freezes at temperatures that depend on the pore size of the MCM-41 down to 29.1 A (C14), below which it is not frozen. In addition, phase changes between alpha-type and beta-type acetonitriles were observed below the melting points. Application of the Gibbs-Thomson equation, assuming the unfrozen layer thickness to be 0.7 nm, gave the interface free energy differences between the interfaces, i.e., Deltagamma(l/alpha) = 22.4 mJ m(-2) for the liquid/pore surface (ps) and alpha-type/ps, and Deltagamma(alpha/beta) = 3.17 mJ m(-2) for alpha-type/ps and beta-type/ps, respectively. QENS experiments substantiate the differing behaviors of monolayer acetonitrile and cc-acetonitrile. The monolayer acetonitrile molecules are anchored so as not to translate. The two Lorentzian analysis of QENS spectra for cc-acetonitriles showed translational motion but markedly slowed. However, the activation energy for cc-acetonitrile in MCM-41 (C18) is 7.0 kJ mol(-1) compared to the bulk value of 12.7 kJ mol(-1). The relaxation times for tumbling rotational diffusion of cc-acetonitrile are similar to bulk values.     

Polymerization of vinyl monomers by the reaction products of diphenyl sulphoxide with potassium

Diphenyl sulphoxide (DPSO) reacts with an equimolar amount of potassium (K) in tetrahydrofuran (THF) at ?78° to form a reddish-black solution, giving an electron spin resonance (ESR) signal only below ?70°. The signal is attributed to a very labile DPSO anion radical. The solution of DPSO-K (1/1) reaction products reacts further with another molecular amount of K at this temperature to give no ESR signal. The DPSO-K (1/1) reaction products initiates the polymerization of acrylonitrile (AN), but not the polymerizations of methyl methacrylate (MMA), styrene (St) or isoprene (IP). The active species of the solution initiating the polymerization of AN is assumed to be potassium benzene sulphenate from analyses of the solution and the infra-red spectrum of AN oligomers obtained using the complex. The DPSO-K (1/2) reaction products solution initiates the polymerization of MMA, St and IP as well as AN. The active species initiating the polymerization of MMA, St or IP is assumed to be phenylpotassium.