Factorial orthogonality in the presence of covariates

Summary The present paper obtains necessary and sufficient conditions for factorial orthogonality in the presence of covariates. In particular, when interactions are absent, combinatorial characterizations of the conditions, as natural generalizations of the well-known equal and proportional frequency criteria, have been derived.     

Electron Temperatures and Electron Densities in Microwave Helium Discharges with Pressures Higher than 0.1 MPa

We adopted laser Thomson scattering for measuring the electron density and the electron temperature of microwave plasmas produced in helium at the pressures higher than the atmospheric pressure. The electron density decreased while we observed the increase in the electron temperature with the pressure. These are reasonable results by considering the decrease in the reduced electric field, the dominant loss of electrons via three‐body recombination with helium as the third body, and the production of electrons with medium energy via heavy particle collisions at the high gas pressure. The temporal variation of the electron temperature had the rise and the fall time constants of approximately 10 ns. The rapid heating and cooling of the electron temperature are due to the fast energy transfer from electrons to helium because of the high collision frequency in the high‐pressure discharge. (© 2015 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Preparation of highly dispersible and tumor-accumulative, iron oxide nanoparticles Multi-point anchoring of PEG-b-poly(4-vinylbenzylphosphonate) improves performance significantly

This paper describes the preparation of iron oxide nanoparticles, surface of which was coated with extremely high immobilization stability and relatively higher density of poly(ethylene glycol) (PEG), which are referred to as PEG protected iron oxide nanoparticles (PEG-PIONs). The PEG-PIONs were obtained through alkali coprecipitation of iron salts in the presence of the PEG-poly(4-vinylbenzylphosphonate) block copolymer (PEG-b-PVBP). In this system, PEG-b-PVBP served as a surface coating that was bound to the iron oxide surface via multipoint anchoring of the phosphonate groups in the PVBP segment of PEG-b-PVBP. The binding of PEG-b-PVBP onto the iron oxide nanoparticle surface and the subsequent formation of a PEG brush layer were proved by FT-IR, zeta potential, and thermogravimetric measurements. The surface PEG-chain density of the PEG-PIONs varied depending on the [PEG-b-PVBP]/[iron salts] feed-weight ratio in the coprecipitation reaction. PEG-PIONs prepared at an optimal feed-weight ratio in this study showed a high surface PEG-chain surface density (≈0.8 chainsnm(-2)) and small hydrodynamic diameter (<50 nm). Furthermore, these PEG-PIONs could be dispersed in phosphate-buffered saline (PBS) that contains 10% serum without any change in their hydrodynamic diameters over a period of one week, indicating that PEG-PIONs would provide high dispersion stability under in vivo physiological conditions as well as excellent anti-biofouling properties. In fact we have confirmed the prolong blood circulation time and facilitate tumor accumulation (more than 15% IDg(-1) tumor) of PEG-PIONs without the aid of any target ligand in mouse tumor models. The majority of the PEG-PIONs accumulated in the tumor by 96 h after administration, whereas those in normal tissues were smoothly eliminated by 96 h, proving the enhancement of tumor selectivity in the PEG-PION localization. The results obtained here strongly suggest that originally synthesized PEG-b-PVBP, having multipoint anchoring character by the phosphonate groups, is rational design for improvement in nanoparticle as in vivo application. Two major points, viz., extremely stable anchoring character and dense PEG chains tethered on the nanoparticle surface, worked simultaneously to become PEG-PIONs as an ideal biomedical devices intact for prolonged periods in harsh biological environments.     

Efficient excited energy transfer reaction in clay/porphyrin complex toward an artificial light-harvesting system

The quantitative excited energy transfer reaction between cationic porphyrins on an anionic clay surface was successfully achieved. The efficiency reached up to ca. 100% owing to the "Size-Matching Rule" as described in the text. It was revealed that the important factors for the efficient energy transfer reaction are (i) suppression of the self-quenching between adjacent dyes, and (ii) suppression of the segregated adsorption structure of two kinds of dyes on the clay surface. By examining many different kinds of porphyrins, we found that tetrakis(1-methylpyridinium-3-yl) porphyrin (m-TMPyP) and tetrakis(1-methylpyridinium-4-yl) porphyrin (p-TMPyP) are the suitable porphyrins to accomplish a quantitative energy transfer reaction. These findings indicate that the clay/porphyrin complexes are promising and prospective candidates to be used for construction of an efficient artificial light-harvesting system.     

Fluorous solvent for cell culture

Incubation of mouse melanoma B16 cells in fluorous solvents with low boiling point such as perfluoromethylcyclohexane, 1,1,1,3,3,3-hexafluoro-2-propanol, ethylpentafluoropropionate resulted in cell death. However, cells lived up to 2 days in fluorous alcohols such as 2,2,3,3,4,4,5,5-octafluoro-1-pentanol and 3,3,4,4,5,5,6,6,6-nonafluoro-1-hexanol with relatively higher fluorine content. Remarkably, cells survived deprived of nutrition up to 4 days when incubated in 2,2,3,3,4,4,5,5,6,6,6-undecafluoro-1-hexanol or in 2,2,3,3,4,4,5,5,6,6,7,7-dodecafluoroheptanol that have the most number of fluorine atoms (11 and 12, respectively) among the perfluoroalkyl alcohols used, and with boiling points of 128 °C and 169 °C, respectively.     

Nonnegative determinant of a rectangular matrix: Its definition and applications to multivariate analysis

It is well known that the determinant of a matrix can only be defined for a square matrix. In this paper, we propose a new definition of the determinant of a rectangular matrix and examine its properties. We apply these properties to squared canonical correlation coefficients, and to squared partial canonical correlation coefficients. The proposed definition of the determinant of a rectangular matrix allows an easy and straightforward decomposition of the likelihood ratio when given sets of variables are partitioned into row block matrices. The last section describes a general theorem on redundancies among variables measured in terms of the likelihood ratio of a partitioned matrix.     

Internal tissue displacement measurement based on ultrasonic wave Doppler signal digital detection and its application to fetal movement monitoring

We have developed a fetal movement monitoring system based on small displacement measurement of internal tissues. When ultrasonic pulses are transmitted to the fetus, the reflected ultrasonic waves which have a Doppler frequency shift due to the fetal movements are detected by using an ultrasonic pulsed Doppler technique. In this paper, we propose a displacement measurement method for internal tissues which is based on the Doppler signal digital detection technique. In the method, the received ultrasonic RF signals are sampled with a sampling frequency of four times higher than the centre frequency of the ultrasonic waves; the Doppler frequency shift signals are derived using digital signal processing. From the detected signals, the internal displacements are estimated using the arc-tangent method. The basic algorithm of the detection method has already been used in the area of blood flow sensing, however, we apply the algorithm to the displacement measurement of internal tissues. The comparison between the proposed method and the conventional method is presented. The fetal movement quantitative monitoring system based on the method which has been constructed is shown.     

Preparation of flexible and transparent polylactic acids films by crystallization manipulation

Highly flexible and transparent polylactic acids (PLAs) films were successfully prepared by manipulating their crystallization. The semicrystalline poly(L ‐lactic acid) (L) was blended with a noncrystalline poly(DL ‐lactic acid) (DL) together with diglycerol tetraacetate (DGTA). Optimal DGTA content to plasticize PLAs was about 17%. Addition of DL hindered the crystallization of the films. Tensile strengths of the films having DL content more than 5% were about 10 MPa while the elongations at break were boosted as DL content increased. Films having L/DL ratio of 50/50 showed elongations at break of 270%. Stretch ability and clarity of films containing 15–50% DL were fair although they were subjected to annealing at 60 °C for 1 h. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6489–6495, 2008     

Development of micromarkers with various photoluminescence colors as tracers for shadowing pursuits.

Micromarkers with five photoluminescence colors were developed as tracers for shadowing pursuits. The markers are colorless powders with particle diameters of several tens to several hundreds of micrometers, prepared using a cryogenic sample crusher. They were visualized using red, green, yellow, magenta or cyan photoluminescence under ultraviolet light at approximately 365 nm. The markers were composed of photoluminescent compounds dispersed in polyvinyl butyral. The photoluminescent compounds in the polyvinyl butyral were stable under ambient conditions for more than one year after application. The compounds with the red, green, yellow, magenta and cyan photoluminescence contained a europium (Eu(3+)) complex, a terbium (Tb(3+)) complex, a mixture of Tb(3+) and Eu(3+) complexes, a mixture of Eu(3+) complex and o-coumaric acid, and a mixture of Tb(3+) complex and 7-hydroxycoumarin along with a few drops of a sodium bicarbonate aqueous solution, respectively. Neodymium (Nd(3+)) and ytterbium (Yb(3+)) complexes with photoluminescence in the near-IR wavelength region can also be added to these visible photoluminescent compounds as secret markers for discrimination. The markers were non-destructively identified using a microscopic FT-IR spectrometer and a microscopic spectrometer equipped with a fluorescence detector.     

Double beam nanosecond laser flash photolysis for precise measurement of small absorbances in transient spectroscopy: Observation of decay profile of the excited triplet state of tetraphenylporphyrinatoantimony(V) with absorbance smaller than 0.01

Double beam laser flash photolysis has been newly developed for precise measurement of small absorbances in transient spectroscopy. The monitoring light beam was divided into two parts; one beam for monitoring the sample and a reference one. The two beams were simultaneously monitored by two similar independent photomultipliers and recorded on a two channel digital storage oscilloscope. The method enabled observation of signals within the full range of the pulse width of Xe lamp around 100 μs. Even a decay profile with extremely small absorbance around 0.01 of transient such as the excited triplet state of metalloporphyrins was precisely observed by the double beam method.