Photochemical deprotection of nitro-substituted benzenesulfenates via photoinduced electron transfer

The photochemical deprotection of alkyl 2,4-dinitrobenzenesulfenate or alkyl 2-nitrobenzenesulfenate was successfully achieved by addition of triethylamine, while it was unsuccessful without triethylamine. The sulfur-oxygen bond cleavage is thought to occur heterolytically in the sulfenate anion radical produced by photoinduced electron transfer with triethylamine.     

Graft copolymers having hydrophobic backbone and hydrophilic branches. XXIII. Particle size control of poly(ethylene glycol)-coated polystyrene nanoparticles prepared by macromonomer method

Monodisperse polymeric nanospheres, which consist of polystyrene cores and poly(ethylene glycol) (PEG) branches on their surfaces, were prepared by the dispersion copolymerization of styrene (St) with PEG macromonomers that had a methacryloyl (MMA-PEG) or p-vinylbenzyl (St-PEG) end group in various organic solvent/water media. Electron spectroscopy for chemical analysis (ESCA) of the nanosphere surfaces indicated that PEG macromonomer chains were favorably located on their surfaces. The morphologies of the nanospheres were observed via a scanning electron micrograph (SEM), and particle sizes were estimated by a submicron particle analyzer. When both the concentration of macromonomers and molecular weight were higher, small nanospheres in diameter were obtained. Larger nanospheres in diameter were obtained using macromonomers with low molecular weight at lower concentration. The functions that correlate the diameter (D_n) on different concentration units were D_n = K[St]^0.64[MMA-PEG]^{−0.53±0.01}[I]^−0.49 and D_n = K[St]^0.80[St-PEG]^{−0.69±0.01}[I]^−0.22, where [I], [St], [MMA-PEG], and [St-PEG] are initiator, styrene, MMA-PEG, and St-PEG macromonomer concentration in feed, respectively. When the reaction parameters such as the molecular weight of the macromonomers were properly chosen, the particle size could be controlled in a range from ca. 80 to 3100 nm. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2155–2166, 1999     

Synthesis and functionalities of poly(N-vinylalkylamide). V. Control of a lower critical solution temperature of poly(N-vinylalkylamide)

N-vinyl-n-butyramide (NVBA), N-vinylisovaleramide (NVIVA), and N-vinyl-n-valeramide (NVVA), which are N-vinylalkylamides with different alkyl groups were synthesized and their solution behavior in a polymeric form was examined. Copolymers of N-vinylisobutyramide (NVIBA) with N-vinylacetamide (NVA), NVIBA with NVVA, and NVVA with NVA were prepared by the solution polymerization to control the LCSTs. The resultant polyNVBA showed a lower critical solution temperature (LCST) sharply at 32°C, but polyN-vinylisovaleramide (polyNVIVA) and polyN-vinyl-n-valeramide(polyNVVA) that have n-butyl and isobutyl groups, respectively, on their side chains were insoluble even in cold water. The water solubility of the resulting polymers was found to vary, depending on the molecular shapes as well as the side chain length of the alkyl groups in question. The copolymers consisting of NVVA, NVIBA, and NVA in water showed LCSTs sharply between 10 and 90°C, depending on changes in their comonomer content. It was found that the changes in LCST that are caused by the incorporation of comonomers are due to changes in the overall hydrophilicity of the polymer. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3087–3094, 1997     

Study on interaction between Tb(III) and poly(N-isopropylacrylamide)

A new kind of the thermo-sensitive and fluorescent complex of poly(N-isopropylacrylamide) (PNIPAM) and Tb(III) was synthesized by free radical polymerization, in which PNIPAM was used as a polymer ligand. The complex was characterized by using X-ray photoelectron spectroscopy (XPS), ultraviolet-visual (UV), Fourier transform infrared (FT-IR) and fluorescence spectroscopy. The results from the experiments indicated that there is a strong interaction between PNIPAM and Tb(III), leading to a decrease in the electron density of nitrogen and oxygen atoms and an increase in the electron density of Tb(III) in the PNIPAM containing Tb(III) by contrast with PNIPAM and Tb(III), respectively, meanwhile, exhibiting that the Tb(III) is mainly bonded to oxygen atoms in the polymer chain of PNIPAM and formed the complex of PNIPAM-Tb(III). After forming the PNIPAM-Tb(III) complex, the emission fluorescence intensity of Tb(III) in the PNIPAM-Tb(III) complex is significantly enhanced because the effective intramolecular energy transfer from PNIPAM to Tb(III). Especially, the emission intensity of the fluorescence peak at 547 nm can be increased as high as 145 times comparing with that of the pure Tb(III). The intramolecular energy transfer efficiency for fluorescence peak at 547 nm can reach as high as 68%. The fluorescence intensity is related the weight ratio of Tb(III) and PNIPAM in the PNIPAM-Tb(III) complex. When the weight ratio is 1.4%, the maximum fluorescence enhancement can be obtained. Nevertheless, the lower critical solution temperature of PNIPAM containing a low content of Tb(III) has not obviously changed after the formation of the complex of PNIPAM-Tb(III) by the interaction between PNIPAM and Tb(III). This novel thermosensitive and fluorescence characterization of the PNIPAM-Tb(III) complex may be useful in the fluorescence systems and the biomedical field.     

Effect of refraction index and thickness of the light guide in the position-sensitive gamma-ray detector using compact PS-PMTs

We constructed a position-sensitive gamma-ray detector consisting of an array of BGO scintillators, a light guide and compact PS-PMTs. The effects of refractive index and thickness of the light guide of a glass plate on the detector performance were investigated. A light guide with higher refractive index and smaller thickness is found better for a good spatial resolution.     

Irreversible helix rearrangement from Cis‐transoid to Cis‐cisoid in poly(p‐n‐hexyloxyphenylacetylene) induced by heat‐treatment in solid phase

Polymerization of p‐n‐hexyloxyphenylacetylene (pHPA) by using a [Rh(norbornadine)Cl]₂‐triethylamine catalyst was carried out at room temperature to afford stereoregular helical poly(p‐n‐hexyloxyphenylacetylene)s (PpHPAs). When ethanol and n‐hexane were used as polymerization solvents, a bright yellow PpHPAs, poly( Y ) with M_n = 8.5 × 10⁴ and its purple red polymer, poly( R ) with M_n = 5.3 × 10⁴ were obtained in 95% yields and 84% yields, respectively. Diffuse reflective UV–vis spectra of poly( Y ) and poly( R ) in solid phase showed different broad absorption peaks at 445 and 575 nm, respectively. X‐Ray diffraction patterns of poly( Y ) and poly( R ) showed typical columnar structures assignable to cis‐transoid and cis‐cisoid structures, respectively, which were also supported by molecule mechanics calculation. Poly( Y ) was irreversibly transformed to a reddish‐black polymer, poly( Y‐B ), which columnar diameter was nearly the same as that of poly( R ). Further, poly( Y ) showed an exothermic peak in the differential scanning calorimetry trace at 80 °C for 1 h in N₂ gas. Thus, these findings suggest a thermally irreversible rearrangement from an unstable cis‐transoid form, poly( Y ) with a stretched cis‐transoid helix to a stable cis‐cisoid form, poly( R ), with a contracted cis‐cisoid helix in the solid phase to give poly( Y → B ) with the cis‐cisoid form. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Specific recognition of syndiotactic poly(methacrylic acid) in porous isotactic poly(methyl methacrylate) thin films based on the effects of stereoregularity,temperature, and solvent

The effects of stereoregularity, temperature, and solvent on the specific recognition of syndiotactic (st)‐poly(methacrylic acid) (PMAA) in macromolecularly porous isotactic (it)‐poly(methyl methacrylate) films were investigated to give important insights into the regularity and stability of nanospaces in the it‐PMMA films as well as template polymerization. The porous it‐PMMA films were fabricated on quartz crystal microbalance (QCM) substrates via the layer‐by‐layer (LbL) assembly of it‐PMMA/st‐PMAA, plus the st‐PMAA extraction from the assembly. QCM analysis and infrared spectroscopy revealed the first case of stereocomplex formation using st‐PMAA with lower stereoregularity (rr = 73%) in the LbL films, while st‐PMAA obtained with conventional free radical polymerization (rr = 62%) was barely incorporated into the porous it‐PMMA films. The maximum st‐PMAA incorporation increased from 25 to 40 °C, but there were almost no difference between 40 and 55 °C, indicating that the it‐PMMA crystallization would also be accelerated with increasing temperature. The studies on st‐PMAA incorporation with various complexing solvents revealed that the host it‐PMMA in the porous films could only form the original stereocomplex with 2/1 unit‐molar stoichiometry (st‐PMAA/it‐PMMA) in acetonitrile/water or ethanol/water. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3651–3657, 2010