Supramolecular spin-crossover iron complexes based on imidazole-imidazolate hydrogen bonds

The [Fe(II)(H(3)L)](BF(4))(2).3H(2)O (1) complex was synthesized, where H(3)L (tris[[2-[(imidazole-4-yl)methylidene]amino]ethyl]amine) is a tripodal ligand obtained by condensation of tris(2-aminoethyl)amine and 4-formylimidazole (fim) in a 1:3 molar ratio. Starting from 1, a series of complexes, [Fe(II)(H(1.5)L)](BF(4))(0.5) (2) (=[Fe(II)(H(3)L)][Fe(II)(L)]BF(4)), [Fe(H(1.5)L)]BF(4) (3) (=[Fe(II)(H(3)L)][Fe(III)(L)](BF(4))(2)), [Fe(III)(H(3)L)](BF(4))(3).fim.H(2)O (4), and [Fe(III)(L)].2.5H(2)O (5), has been synthesized and characterized. The single-crystal X-ray structure of each complex has been determined. The Fe(II) compound, 2, and a mixed valence Fe(II)-Fe(III) compound, 3, involve formally hemi-deprotonated ligands, H(1.5)L. The structure of 3 consists of a homochiral two-dimensional assembled sheet, arising from the intermolecular hydrogen bonds between [Fe(II)(H(3)L)](2+) and [Fe(III)(L)](0) (3). All but 5 exhibit spin crossover between low-spin (LS) and high-spin (HS) states. This is a rare case where both Fe(II) and Fe(III) complexes containing the same ligand exhibit spin-crossover behavior. Magnetic susceptibility and M?ssbauer studies showed that 3 has three accessible electronic states: LS Fe(II)-LS Fe(III), HS Fe(II)-LS Fe(III), and HS Fe(II)-HS Fe(III). Compounds 1-3 show the light-induced excited spin-state trapping effect at the Fe(II) sites upon irradiation with green light. The solution magnetic properties, electronic spectra, and electrochemical properties of 1, 4, and 5 were also studied.     

Synthesis of Unsymmetrical Tetrathiafulvalene Derivatives via Me(3)Al-Promoted Reactions of Organotin Compounds with Esters

Efficient synthetic methods for the construction of a wide variety of unsymmetrical tetrathiafulvalenes (TTFs) via the Me(3)Al-promoted reactions of organotin thiolates or selenolates with esters are described. Reaction of tin thiolates (3a-c and 10) and selenolates (3d, 5, and 7) with esters (11a,b) in the presence of Me(3)Al as a Lewis acid gave dihydrotetrathiafulvalene derivatives (12, 14, 15, and 17-20) and 1,3-dithiane derivatives (13 and 16). In addition, the synthesis of diselenadithiafulvalene derivatives (25-28) could be accomplished by Me(3)Al-mediated reaction of tin thiolate (2a) or selenolates (3d and 5) with esters (22a, 22d, and 24). Furthermore, the application of the Me(3)Al-promoted reaction of tin thiolate (34) with esters (11a-b, 22a-d, and 35a-b) for the synthesis of unsymmetrical TTFs-fused donors enabled us to obtain various TTFs-fused systems (29-33) in short steps.     

Topological dependency of the aromatic sextets in polycyclic benzenoid hydrocarbons. Recursive relations of the sextet polynomial

Mathematical meaning of the Clar's “aromatic sextet” is clarified by analysing the topological dependency of the sextet polynomial. Generalised recursive method for obtaining the sextet polynomial of a polyhex graph is presented. It is shown that the concept of the “super sextet” is necessarily introduced, if one-to-one correspondence between the Kekulé and sextet patterns is assumed. Topological dependency of the maximum number of resonant sextets is clarified and discussed in relation to the aromaticity and stability of polycyclic benzenoid hydrocarbons.     

Semiempirical MO study on the abnormal bond orders of large networks of highly branched polyenes

The π-electronic structures of the ground state of linear and highly branched polyenes with up to 80 π-electrons are calculated with particular reference to the alternation of the bond orders. The MO methods adopted are HMO, PPP , variable-β, γ, and its improved version. The effect of the electron correlation through singly and doubly excited configurations is estimated with a second-order perturbation calculation. The calculated bond orders systematically vary with the degree of approximation used. Most of the bond order values can be grouped into either a single or double bond region. In certain series of highly branched polyenes the bond orders of double and single bonds at the root of branching, respectively, get smaller and larger as the size of the molecule increases and sometimes their difference gets diminishingly small. The origin of these abnormal bond orders is discussed in terms of the π-electron flow networks.     

Novel benzyl sulfonium salt having an aromatic group on sulfur atom as a latent thermal initiator

Three benzyl p-hydroxyphenyl methylsulfonium salts with different counter anions were synthesized as novel latent thermal initiators. Syntheses of the sulfonium salts ( 2 ) were performed by the reaction of p-hydroxyphenyl methyl sulfide with benzyl chloride followed by exchange of the counter anion (Cl^?) with SbF^?₆ ( 2a ), PF^?₆ ( 2b ), or BF^?₄ ( 2c ). In the bulk polymerization of glycidyl phenyl ether (PGE) with 2 , initiator activity of the sulfonium salts was evaluated by comparison with that of benzyl tetramethylenesulfonium hexafluoroantimonate ( 1 , R = H). Among the initiators, 2a showed the highest activity, and was much more active than 1 (R = H). Since the polymerization of PGE with 2a proceeded efficiently at more than 80°C but not at all at less than 60°C, 2a was suggested to be a good latent thermal initiator.     

Structure of arnebifuranone,new monoterpenylbenzoquinone from arnebia euchroma

A new monoterpenylbenzoquinone named arnebifuranone (5) was isolated from arnebiaeuchroma (Royle) Johnst. and its structure was elucidated to be a 2,3-dimethoxy-1,4-benzoquinone having a monoterpene side chain containing a furan ring. The monoterpene moiety is bonded to the benzoquinone ring with its head carbon.     

Analysis of the π-electronic structure of infinitely large networks

Summary Applying the Coulson and Longuet-Higgins integral method to polycyclic aromatics, the analytical solutions of bond orders, -electronic energy and benzene character for the infinitely large cyclic polyacene and polyphenanthrene with various modes of bond alternation are obtained in the HMO scheme. Most of the results are explicitly and newly expressed in terms of three kinds of the elliptic integrals. Judging from the magnitudes of bond orders and benzene character the most probable modes of the bond alternation for these two networks are discussed with their Kekulé structures. It was shown that if bond alternation is properly taken into consideration, HMO calculation can fairly well reproduce the results obtained by more sophisticated methods.     

Hydrogen atom abstraction and electron transfer of triplet 2,3-dihalo-1,4-naphthoquinones studied by the cidep technique and laser flash photolysis

Investigations using CIDEP techniques showed that an H-atom abstraction from phenol and the electron transfer from 1,2,4,5-tetramethoxybenzene to photoexcited 2,3-dibromo-1,4-naphthoquinone (DBNQ) and 2,3-dichloro-1,4-naphthoquinone (DCNQ) in the polar media originated from their triplet states. Nanosecond laser photolysis at 355 nm was carried out to determine the absorption spectra and coefficients of the corresponding triplet states, semiquinone, and anion radicals for a quantitative investigation of the mechanisms involved in the H-atom abstraction and the electron transfer. The steric hindrance of the substituted groups was indifferent to H-atom abstraction. The electronic structures of triplet DBNQ and DCNQ at 295 K were both revealed to be the mixed states of ³(n,π^*) with a ³(π,π^*) character.     

New design of a radio-frequency plasma torch

A numerical model has been developed for predicting the two-dimensional flow and temperature fields in a radio-frequency (rf) plasma torch. The method employed here is based on Boulos' model with the exception of the boundary conditions for the electric and magnetic field equations. Calculations have been made for the confirmation of a new sample injection method, which is capable of completely evaporating refractory materials at high feeding rates without interfering with the stability of the plasma. In the newly designed torch, the reagent is radially injected into the hottest part of the plasma through quartz capillary tubes set symmetrically between an inductor coil. Experimental investigations have also been performed for verifying the proper function of the design. These results provide evidence that our radial injection method developed here is more effective in practical processing than the conventional axial injection methods.     

Facile Preparation of Organometallic Nanorods from Various Ethynyl-Substituted Molecules

A facile method to prepare one-dimensional (1D) organometallic nanomaterials from various ethynyl-substituted molecules is reported. The reactions of 3-chloro-1-ethynylbenzene, p-tBu-phenylacetylene and 4-ethynylbiphenyl with Cu⁺ ions in acetonitrile yield nanorod-shaped copper acetylides (Cu−C≡C−R) crystals. In the case of linear alkynes, namely, propyne, 1-pentyne and 1-hexyne, it was found that using an aqueous ammonia/ethanol mixed solvent instead of acetonitrile is a better approach to obtain 1D nanostructures. This procedure also enables us to prepare functional 1D nanomaterials. We demonstrate the preparation of a paramagnetic nanorod from the organic radical p-ethynylphenyl nitronyl nitroxide, and fluorescent nanorods from 9-ethynylphenanthrene and 2-ethynyl-9,9′-spirobifluorene.