Temperature sensor based on fluorescence measurement of Cerium Ytterbium doped fiber

An investigation of the characteristics of temperature-dependent fluorescence of a Cerium Ytterbium (Yb³⁺)- doped silica fiber (CYDF) is presented. A 0.3-m long CYDF is diode-pumped at 976 nm and the fluorescence intensity is measured against the fiber temperature. It is observed that the fluorescence intensity decreases linearly with the increase in temperature due to the enhancement of non-radiative transition as well as the quenching of the Ytterbium luminescence. The sensitivity of the sensor is obtained at 0.0024 mW/°C with a linearity of more than 98% in the range of room temperature to 250°C. The proposed sensor is compact, low-cost and has long-life. It can also be combined with a wide range of existing fiber-optic multiplexing schemes that can simultaneously detect multiple physical parameters.     

High-resolution Fresnel zone plate fabrication by achromatic spatial frequency multiplication with extreme ultraviolet radiation

We used an approach based on the self-imaging property of gratings to fabricate high-resolution Fresnel zone plates (FZPs). Under certain conditions, the illumination of a parent ZP with a wideband EUV beam produces a radially oscillating intensity distribution with double the spatial frequency of the ZP. This intensity distribution is observed in a certain distance range, given by the local zone width, the focal length of the ZP, and the spectral bandwidth of the illuminating beam. This phenomenon has been used to lithographically record daughter ZPs that have approximately half the zone width, thus twice the resolution, of the parent ZP. FZPs with zone widths as low as 30 nm have been fabricated in this way. Use of this technique in the extreme ultraviolet (EUV) region has the potential for high throughput production of FZPs and similar high-resolution diffraction optics with variable spatial frequency for the EUV and x-ray regions.     

Q-Switched Fiber Laser with a Hafnium-Bismuth-Erbium Codoped Fiber as Gain Medium and Sb2Te3 as Saturable Absorber

Journal of Russian Laser Research - We successfully demonstrate Q-switched fiber laser with a 20 cm long Hafnium-Bismuth-Erbium codoped fiber (HBEDF) as an active medium in conjunction with...     

Positive parity states and some electromagnetic transition properties of even-odd europium isotopes

The positive-parity low-spin states of even-odd Europium isotopes (^151–155Eu) were studied within the framework of the interacting boson-fermion model. The calculated positive low-spin state energy spectra of the odd Eu isotope were found to agree quite well with the experimental data. The B(E2) values were also calculated and it was found that the calculated positive-parity low-spin state energy spectra of the odd-A Eu isotopes agree quite well with the experimental data.     

Switchable Q-switched and mode-locked erbium-doped fiber laser operating in the L-band region

We demonstrate a switchable Q-switched and mode-locked erbium-doped fiber laser (EDFL) operating in the L-band region using the nonlinear polarization rotation effect. The switching operation is achieved by controlling intensity-dependent loss using a polarization controller. In Q-switching mode, the EDFL produces a pulse train with a repetition rate of 21.1 kHz, pulse width of 7.7 μs, and pulse energy of 13.6 nJ. The EDFL also generates a multi-wavelength comb with a very narrow and constant wavelength spacing of 0.045 nm and optical signal-to-noise ratio of at least 10 dB. During mode locking, the EDFL produces stretched pulses with 3-dB bandwidth of 26.2 nm, pulse width of 350 fs, repetition rate of 2.38 MHz, and pulse energy of 48.56 pJ.     

Protein adsorption and transport in dextran-modified ion-exchange media. I: Adsorption

Adsorption behavior is compared on a traditional agarose-based ion-exchange resin and on two dextran-modified resins, using three proteins to examine the effect of protein size. The latter resins typically exhibit higher static capacities at low ionic strengths and electron microscopy provides direct visual evidence supporting the view that the higher static capacities are due to the larger available binding volume afforded by the dextran. However, isocratic retention experiments reveal that the larger proteins can be almost completely excluded from the dextran layer at high ionic strengths, potentially leading to significant losses in static capacity at relevant column loading conditions. Knowledge of resin and protein properties is used to estimate physical limits on the static capacities of the resins in order to provide a meaningful interpretation of the observed static capacities. Results of such estimates are consistent with the expectation that available surface area is limiting for traditional resins. In dextran-modified media, however, the volume of the dextran layer appears to limit adsorption when the protein charge is low relative to the resin charge, but the protein–resin electroneutrality may be limiting when the protein charge is relatively high. Such analyses may prove useful for semiquantitative prediction of maximum static capacities and selection of operating conditions when combined with protein transport information.     

Promoter Activation in Δhfq Mutants as an Efficient Tool for Specialized Metabolite Production Enabling Direct Bioactivity Testing

Natural products (NPs) from microorganisms have been important sources for discovering new therapeutic and chemical entities. While their corresponding biosynthetic gene clusters (BGCs) can be easily identified by gene‐sequence‐similarity‐based bioinformatics strategies, the actual access to these NPs for structure elucidation and bioactivity testing remains difficult. Deletion of the gene encoding the RNA chaperone, Hfq, results in strains losing the production of most NPs. By exchanging the native promoter of a desired BGC against an inducible promoter in Δhfq mutants, almost exclusive production of the corresponding NP from the targeted BGC in Photorhabdus, Xenorhabdus and Pseudomonas was observed including the production of several new NPs derived from previously uncharacterized non‐ribosomal peptide synthetases (NRPS). This easyPACId approach (easy Promoter Activated Compound Identification) facilitates NP identification due to low interference from other NPs. Moreover, it allows direct bioactivity testing of supernatants containing secreted NPs, without laborious purification.     

A Solid Phase Extraction Application of Hybrid Nano B_2O_3/ZrO_2 for Separation and Determination of Trace Indium in Environmental Samples

Hybrid nanomaterials have attracted considerable interest in environmental science, analytical chemistry and atomic spectroscopy. In the present study, a column solid phase extractioo procedure was developed for the separation and preconcentration of indium in various matrixes by using hybrid nanomaterial B₂O₃/ZrO₂ (HNMBZ). Various experimental and analytical parameters such as sample solution pH, sample solution volume, flow rate of sample solution and eluent, volume and concentration of eluent aod amount of HNMBZ, effect of common matrix ions and capacity of sorbent were investigated. The adsorbed metal ions on HNMBZ were eluted with 6 mL of 1 mol·L-1 HNO₃ solutions and their concentrations were determined by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS). Under the optimized conditions, detection limits for indium for 3 pixels and 5 pixels were found as 0.20 and 0.16 μg·L-1, respectively. The accuracy of the procedure was checked by spiked water samples. The developed procedure was successfully applied to real samples for the separation and determination of indium.