The Electronic State of Hydrogen in the α Phase of the Hydrogen‐Storage Material PdH(D)x: Does a Chemical Bond Between Palladium and Hydrogen Exist?

The palladium–hydrogen system is one of the most famous hydrogen‐storage systems. Although there has been much research on β‐phase PdH(D)_x, we comprehensively investigated the nature of the interaction between Pd and H(D) in α‐phase PdH(D)_x (x<0.03 at 303 K), and revealed the existence of Pd?H(D) chemical bond for the first time, by various in situ experimental techniques and first‐principles theoretical calculations. The lattice expansion, magnetic susceptibility, and electrical resistivity all provide evidence. In situ solid‐state ¹H and ²H NMR spectroscopy and first‐principles theoretical calculations revealed that a Pd?H(D) chemical bond exists in the α phase, but the bonding character of the Pd?H(D) bond in the α phase is quite different from that in the β phase; the nature of the Pd?H(D) bond in the α phase is a localized covalent bond whereas that in the β phase is a metallic bond.     

Ultrashort-pulse-controlled all-optical modulation by interband and intersubband transitions in doped quantum wells

The optimum condition for achieving highly efficient ultrafast all-optical pulse modulation by modification of the absorption of a pulsed interband light field by ultrasubband control-light pulses in a doped quantum well is investigated. The modulation efficiency in the femtosecond domain can be maximized by an intersubband control light with a pulse width (200 fs) that is comparable with the phase-relaxation time of the system and an intensity that is close to the intersubband saturation intensity.     

Precise thickness measurement within a few monolayers by X-ray diffraction from InGaAs/GaAs strained-layer superlattices

We propose a technique to measure the thickness of a GaAs layer with a precision of a few monolayers (MLs) by high-resolution X-ray diffraction (HRXRD) from InGaAs/GaAs strained-layer superlattices (SLSs) on GaAs substrates. Using this technique to monitor the GaAs growth rate, we have successfully controlled the Ga beam flux within ±1% in molecular beam epitaxy (MBE) growth for continuous 40 runs during four days by increasing the Ga cell temperature to compensate the decrease of the Ga beam flux caused by the consumption of the Ga source. Precise thickness measurements are also demonstrated in the growth on InP substrates by using InAlGaAs/InGaAs SLSs and InAlGaAs/InAlAs SLSs.     

A Solid‐State Fluorescent Host System with a 21‐Helical Column Consisting of Chiral (1R,2S)‐2‐Amino‐1,2‐diphenylethanol and Fluorescent 1‐Pyrenecarboxylic Acid

A solid‐state fluorescent host system was created by self‐assembly of a 2₁‐helical columnar organic fluorophore composed of (1R,2S)‐2‐amino‐1,2‐diphenylethanol and fluorescent 1‐pyrenecarboxylic acid. This host system has a characteristic 2₁‐helical columnar hydrogen‐ and ionic‐bonded network. Channel‐like cavities are formed by self‐assembly of this column, and various guest molecules can be included by tuning the packing of this column. Moreover, the solid‐state fluorescence of this host system can change according to the included guest molecules. This occurs because of the change in the relative arrangement of the pyrene rings as they adjust to the tuning of the packing of the shared 2₁‐helical column, according to the size of the included guest molecules. Therefore, this host system can recognize slight differences in molecular size and shape.     

Stir bar sorptive extraction and thermal desorption-gas chromatography-mass spectrometry for trace analysis of triclosan in water sample

A simple and highly sensitive method called stir bar sorptive extraction (SBSE) and thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS), which is used for the determination of trace amounts of 5-chloro-2-(2,4-dichlorophenoxy)phenol (triclosan) in river water samples, is described. A stir bar coated with polydimethylsiloxane (PDMS) is added to a 10mL water sample and stirring is carried out for 120min at room temperature (25 degrees C) in a vial. Then, the PDMS stir bar is subjected to TD-GC-MS. The detection limit of triclosan is 5ngL(-1) (ppt). The method shows linearity over the calibration range (0.02-20mugL(-1)) and the correlation coefficient is higher than 0.997 for triclosan standard solution. The recovery of triclosan in river water samples ranges from 91.9 to 108.3% (RSD: 4.0-7.0%). This simple, accurate, sensitive, and selective analytical method may be used in the determination of trace amounts of triclosan in river water samples.     

Mercury speciation and analysis in drinking water by stir bar sorptive extraction with in situ propyl derivatization and thermal desorption-gas chromatography-mass spectrometry

A method for mercury analysis and speciation in drinking water was developed, which involved stir bar sorptive extraction (SBSE) with in situ propyl derivatization and thermal desorption (TD)-GC-MS. Ten millilitre of tap water or bottled water was used. After a stir bar, pH adjustment agent and derivatization reagent were added, SBSE was performed. Then, the stir bar was subjected to TD-GC-MS. The detection limits were 0.01 ng mL(-1) (ethylmercury; EtHg), 0.02 ng mL(-1) (methylmercury; MeHg), and 0.2 ng mL(-1) (Hg(II) and diethylmercury (DiEtHg)). The method showed good linearity and correlation coefficients. The average recoveries of mercury species (n=5) in water samples spiked with 0.5, 2.0, and 6.0 ng mL(-1) mercury species were 93.1-131.1% (RSD<11.5%), 90.1-106.4% (RSD<7.8%), and 94.2-109.6% (RSD<8.8%), respectively. The method enables the precise determination of standards and can be applied to the determination of mercury species in water samples.     

Simultaneous analysis of benzophenone sunscreen compounds in water sample by stir bar sorptive extraction with in situ derivatization and thermal desorption-gas chromatography-mass spectrometry

A method for the simultaneous measurement of benzophenone (BP) sunscreen compounds, its derivatives 2,4-dihydroxybenzophenone (BP-1), 2-hydroxy-4-methoxybenzophenone (BP-3), 2-hydroxy-4-methoxy-4'-methylbenzophenone (BP-10), 2-hydroxybenzophenone (2OH-BP), 3-hydroxybenzophenone (3OH-BP) and 4-hydroxybenzophenone (4OH-BP), in water samples was developed using stir bar sorptive extraction (SBSE) with in situ derivatization followed by thermal desorption (TD)-gas chromatography-mass spectrometry (GC-MS). The detection limit is 0.5-2 ng L(-1) (ppt) for the seven BPs. The method shows good linearity and the correlation coefficients are equal to or higher than 0.990 for all the analyte. The average recoveries of BPs range from 102.0 to 128.1% (RSD<15.4%, n=6). Trace amounts of BPs in river water samples were determined by the present method.     

Thermosensitive pickering emulsion stabilized by poly(N-isopropylacrylamide)-carrying particles

Poly(N-isopropylacrylamide) (PNIPAM)-carrying particles were characterized as thermosensitive Pickering emulsifiers. Emulsions were prepared from various oils, such as heptane, hexadecane, trichloroethylene, and toluene, with PNIPAM-carrying particles. PNIPAM-carrying particles preferentially formed oil-in-water (O/W)-type emulsions with a variety of oils. All the emulsions stabilized by PNIPAM-carrying particles were stable for more than 3 months as long as they were stored at room temperature. However, when the emulsions were heated from room temperature to 40 degrees C, at which point the PNIPAM layer caused a coil-to-globule transition, phase separation occurred. Thus, by using thermosensitive PNIPAM-carrying particles as emulsifiers, the stability of the Pickering emulsions could be controlled by a slight change in temperature.     

Production of a positron microprobe using a transmission remoderator.

A production method for a positron microprobe using a beta+-decay radioisotope (22Na) source has been investigated. When a magnetically guided positron beam was extracted from the magnetic field, the combination of an extraction coil and a magnetic lens enabled us to focus the positron beam by a factor of 10 and to achieve a high transport efficiency (71%). A 150-nm-thick Ni(100) thin film was mounted at the focal point of the magnetic lens and was used as a remoderator for brightness enhancement in a transmission geometry. The remoderated positrons were accelerated by an electrostatic lens and focused on the target by an objective magnetic lens. As a result, a 4-mm-diameter positron beam could be transformed into a microprobe of 60 microm or less with 4.2% total efficiency. The S parameter profile obtained by a single-line scan of a test specimen coincided well with the defect distribution. This technique for a positron microprobe is available to an accelerator-based high-intensity positron source and allows 3-dimensional vacancy-type defect analysis and a positron source for a transmission positron microscope.