Separation and simultaneous determination of cobalt, nickel and copper with 2-(4-methyl-2-quinolylazo)-5-diethylaminophenol by reversed-phase high-performance liquid chromatography

Performance of six quinolylazo compounds was studied as a pre-column derivatizing reagent for the separation of metal ions in the reversed-phase high-performance liquid chromatography. 2-(4-Methyl-2-quinolylazo)-5-diethylaminophenol (QADP) was suited for the determination of Co, Ni and Cu in the presence of a large amount of Fe. The detection limits under the optimized conditions [stationary phase: L-column ODS; mobile phase: acetone-water (62:38, v/v) containing 0.01 M NH(4)SCN and 0.01 M 2-morpholinoethanesulfonic acid-NaOH (pH 6); injection volume: 10 mul] were 0.24 ng for Co, 0.22 for Ni and 0.53 for Cu. This method was successfully applied to the determination of these metal ions in a standard steel sample.     

Preparation of prolonged-release spherical micro-matrix of ibuprofen with acrylic polymer by the emulsion-solvent diffusion method for improving bioavailability

Prolonged-release spherical micro-matrices of ibuprofen with acrylic polymer (Eudragit RS) were prepared using a novel emulsion-solvent diffusion method. It was found by examining cross sections of the spherical matrix before and after dissolution tests with a scanning electron microscope and a porosimeter that the resultant micro-matrix had a sponge-like internal structure. The spherical matrices were successfully recovered with a relatively high concentration of the drug in ethanol (0.4-0.6 g/ml) and over a wide range of temperatures (5-35 degrees C). The size of the spherical matrix could be easily controlled by varying the agitation speed of the system and the concentration of emulsifier added to the aqueous medium. The drug release rate from the spherical matrix decreased with increasing concentration of polymer formulated due to the reduced diffusion path and increased tortuosity in the matrix. Spherical matrices with ibuprofen:Eudragit RS = 3:1 improved the bioavailability of the drug and prolonged the drug action in beagle dogs.     

Crystalline orientation of the InN films prepared by atmospheric pressure halide chemical vapor deposition

The structural analysis of the hexagonal InN film prepared on a Si(100) substrate by the AP-HCVD technique using InCl₃ and NH₃ as starting materials were carried out by the X-ray pole figure analysis. The deposited films consist of the hexagonal InN pillar crystals. It was found that the pillar crystals, which have random rotation around the 100 axis, were grown at an angle of 70–90° to the substrate.     

Modification effect of spherical zirconia with SiCl4 as a support of methylaluminoxane for heterogeneous single-site catalyst

Unmodified and SiCl₄-modified spherical zirconia-supported methylaluminoxane were used as cocatalyst for propylene polymerization as well as ethylene/1-hexene copolymerization in combined with Me₂Si(η³-C₁₃H₈)(η¹-N^tBu)TiMe₂ (1) at 0 °C. The modification with SiCl₄ improved the catalytic activity. The improvement was clearer in ethylene/1-hexene copolymerization than in propylene polymerization. The number average molecular weight (M_n) of polypropylenes increased linearly against the polymerization time regardless the cocatalyst used to give polymers with narrow molecular weight distribution (M_w/M_n < 1.32), indicating the living nature of the catalytic systems. Thus, propagation rate constant (k_p) and the number of active centers (C^*) were evaluated from M_n and the number of polymer-chains. When the zirconia was modified with SiCl₄, the k_p value decreased and the C^* increased. The latter effect was more significant to enhance the catalytic activity.     

Poly‐ε‐Lysine Modified Nanocarbon Film Electrodes for LPS Detection

We developed an electrochemical system for detecting lipopolysaccharide (LPS) that uses an ultraflat nanocarbon film electrode modified with poly‐ε‐lysine with a high affinity to LPS. LPS was captured on the modified electrode, and then ferrocene labeled polymyxin B (FcPMB) was captured on the LPS adsorbed electrode via the LPS‐PMB affinity interaction. The adsorbed FcPMB provided an amplified response with Fe²⁺ ions, and the current response was dependent on the amount of captured LPS (LOD=2.0 ng/mL). This was due to the efficient accumulation of the obtained current for LPS and the very low noise made possible by the ultraflat surface.     

Effects of Roxadustat on Erythropoietin Production in the Rat Body

Anemia is a major complication of chronic renal failure. To treat this anemia, prolylhydroxylase domain enzyme (PHD) inhibitors as well as erythropoiesis-stimulating agents (ESAs) have been used. Although PHD inhibitors rapidly stimulate erythropoietin (Epo) production, the precise sites of Epo production following the administration of these drugs have not been identified. We developed a novel method for the detection of the Epo protein that employs deglycosylation-coupled Western blotting. With protein deglycosylation, tissue Epo contents can be quantified over an extremely wide range. Using this method, we examined the effects of the PHD inhibitor, Roxadustat (ROX), and severe hypoxia on Epo production in various tissues in rats. We observed that ROX increased Epo mRNA expression in both the kidneys and liver. However, Epo protein was detected in the kidneys but not in the liver. Epo protein was also detected in the salivary glands, spleen, epididymis and ovaries. However, both PHD inhibitors (ROX) and severe hypoxia increased the Epo protein abundance only in the kidneys. These data show that, while Epo is produced in many tissues, PHD inhibitors as well as severe hypoxia regulate Epo production only in the kidneys.     

Boosting Hydrogen Evolution at Visible Light Wavelengths by Using a Photocathode with Modal Strong Coupling between Plasmons and a Fabry-Pérot Nanocavity

Hot-hole injection from plasmonic metal nanoparticles to the valence band of p-type semiconductors and reduction by hot electrons should be improved for efficient and tuneable reduction to obtain beneficial chemical compounds. We employed the concept of modal strong coupling between plasmons and a Fabry-Pérot (FP) nanocavity to enhance the hot-hole injection efficiency. We fabricated a photocathode composed of gold nanoparticles (Au−NPs), p-type nickel oxide (NiO), and a platinum film (Pt film) (ANP). The ANP structure absorbs visible light over a broad wavelength range from 500 nm to 850 nm via hybrid modes based on the modal strong coupling between the plasmons of Au−NPs and the FP nanocavity of NiO on a Pt film. All wavelength regions of the hybrid modes of the modal strong coupling system promoted hot-hole injection from the Au−NPs to NiO and proton/water reduction by hot electrons. The incident photon-to-current efficiency based on H₂ evolution through water/proton reduction by hot electrons reached 0.2 % at 650 nm and 0.04 % at 800 nm.     

Does B3LYP correctly describe magnetism of manganese complexes with various oxidation numbers and various structural motifs?

We assessed the applicability and basis set dependency of the B3LYP functional to investigate magnetic interactions of Mn complexes. For the purpose, we constructed a test set consisting of 16 Mn complexes with various oxidation states and structural motifs.The B3LYP results correctly reproduced magnetism and magneto–redox correlation of the standard μ-oxo motifs with superexchange paths, while it does not work for weak magnetic complexes. We also showed that a modest basis set yields results similar to those of triple-zeta plus diffuse-and-polarization functions. This basis set is expected to be a standard basis set for investigating magnetism of manganese complexes.