Synthesis of nano-polycrystalline diamond from glassy carbon at pressures up to 25 GPa

ABSTRACT

Nano-polycrystalline diamond (NPD) with various grain sizes has been synthesized from glassy carbon at pressures 15–25?GPa and temperatures 1700–2300°C using multianvil apparatus. The minimum temperature for the synthesis of pure NPD, below which a small amount of compressed graphite was formed, significantly increased with pressure from ～1700°C at 15?GPa to ～1900°C at 25?GPa. The NPD having grain sizes less than ～50?nm was synthesized at temperatures below ～2000°C at 15?GPa and ～2300°C at 25?GPa, above which significant grain growth was observed. The grain size of NPD decreases with increasing pressure and decreasing temperature, and the pure NPD with grain sizes less than 10?nm is obtained in a limited temperature range around 1800–2000°C, depending on pressure. The pure NPD from glassy carbon is highly transparent and exhibits a granular nano-texture, whose grain size is tunable by selecting adequate pressure and temperature conditions.     

Grain boundary sliding during ambient-temperature creep in hexagonal close-packed metals

Even at ambient temperature or less, below their 0.2% proof stresses all hexagonal close-packed metals and alloys show creep behaviour because they have dislocation arrays lying on a single slip system with no tangled dislocation inside each grain. In this case, lattice dislocations move without obstacles and pile-up in front of a grain boundary. Then these dislocations must be accommodated at the grain boundary to continue creep deformation. Atomic force microscopy revealed the occurrence of grain boundary sliding (GBS) in the ambient-temperature creep region. Lattice rotation of 5° was observed near grain boundaries by electron backscatter diffraction pattern analyses. Because of an extra low apparent activation energy of 20 kJ/mol, conventional diffusion processes are not activated. To accommodate these piled-up dislocations without diffusion processes, lattice dislocations must be absorbed by grain boundaries through a slip-induced GBS mechanism.     

Relative equidimensionality and stability of actions¶of a reductive algebraic group

In order to inquire into invariants of non-semisimple groups, we introduce and study relative versions of equidimensionality and stabilty, which are called relative quasi-equidimensionality and relative stability, of actions of affine algebraic groups, especially of reductive groups, on affine varieties. As an application of our results, for complex reductive groups of semisimple rank one, we characterize, respectively, relatively stable representations and relatively equidimensional representations and, consequently, show that every equidimensional representation is cofree. Received: 23 October 1998     

Quasi-Nambu-Goldstone modes in Bose-Einstein condensates

We show that quasi-Nambu-Goldstone (NG) modes, which play prominent roles in high energy physics but have been elusive experimentally, can be realized with atomic Bose-Einstein condensates. The quasi-NG modes emerge when the symmetry of a ground state is larger than that of the Hamiltonian. When they appear, the conventional vacuum manifold should be enlarged. Consequently, topological defects that are stable within the conventional vacuum manifold become unstable and decay by emitting the quasi-NG modes. Contrary to conventional wisdom, however, we show that the topological defects are stabilized by quantum fluctuations that make the quasi-NG modes massive, thereby suppressing their emission.     

Simple Methods for Determining Relative Stereochemistry of Kainoid Amino Acids by (1)H NMR Chemical Shifts

The kainoid amino acids are biologically important compounds because they show remarkable neuroexcitatory and excitotoxic activities. For exhibiting potent activity, the stereochemical relationship of the substituents on the pyrrolidine ring is crucial. We found simple methods for determining the relative stereochemistry of these compounds on the basis of the (1)H NMR chemical shifts of H-2 and H-4 in D(2)O solution. The signals of H-2 appear at fields higher than 4.2 ppm when the compounds have 2,3-trans stereochemistry whereas, in the 2,3-cis compounds, they appear lower than 4.2 ppm, irrespective of the C-4 substituent. This criterion holds when the solution is in the range of pD 3-8. Moreover, when an epimeric pair at C-2 is available and the spectra are recorded at the same or nearly equal pD, the H-2 chemical shift of the 2,3-trans isomer is higher than that of the corresponding 2,3-cis isomer. Similarly, the relative stereochemistry between C-3 and C-4 can be determined from the chemical shift of H-4. The signals of H-4 of the 3,4-cis isomers appear at lower fields than those of the corresponding 3,4-trans isomers in each pair of C-4 epimers when the spectra are recorded at the same or nearly equal pD. This holds for the compounds bearing an unsaturated substituent at C-4. All these phenomena can be rationalized by the anisotropic effect of the pi-electron system in the C-2 and C-4 substituents.     

Five‐State Molecular Shuttling of a Pair of [2]Rotaxanes: Distinct Outputs in Response to Acid and Base Stimuli

In this study we synthesized two acid‐/base‐controllable [2]rotaxanes featuring aminodiazobenzene and aminocoumarin units, respectively, as chromophores and dibenzo[24]crown‐8 and dibenzo[25]crown‐8 units, respectively, as their macrocyclic components. Each [2]rotaxane contained N‐alkylarylamine (ammonium) and N,N‐dialkylamine (ammonium) centers as binding sites for their crown ether components. The absorption patterns of the chromophores were dependent on the position of the encircling macrocyclic component and the degree of protonation, with three distinct states (under acidic, neutral, and basic conditions) evident for each [2]rotaxane. The mixed [2]rotaxane system displayed stepwise and independent molecular shuttling behavior based on the degree of protonation of the amino groups in response to both the amount and strength of added acids or bases; as such, the system provided five different absorption signals as outputs that could be read using UV/Vis spectroscopy.     

Formal Alder-ene reaction of a bicyclo[1.1.0]butane in the synthesis of the tricyclic quaternary ammonium core of daphniglaucins

A tricyclic substructure of the tetracyclic nitrogen core of the daphniglaucins was formed by an oxidative activation of the allyl side chain of a bicyclo[1.1.0]butylmethylamine, a spontaneous intramolecular formal Alder-ene reaction, and a selective cyclization of a triol intermediate.     

Syntheses of linear ethoxysiloxanes by the oxidative condensation of triethoxysilane

Linear ethoxysiloxanes were synthesized by the oxidative condensation of hydrosilane. Triethoxysilane was subjected to oxidation to form triethoxysilanol, and pentaethoxydisiloxane was formed by the condensation reaction of triethoxysilane with triethoxysilanol. Pentaethoxydisiloxane was also subjected to oxidative condensation to form a mixture of nona- and decaethoxytetrasiloxanes. In contrast, pentaethoxydisiloxane, heptaethoxytrisiloxane, and nonaethoxytetrasiloxanes were subjected to the reaction with ethanol in the presence of zinc to isolate hexaethoxydisiloxane, octaethoxytrisiloxane, and decaethoxytetrasiloxane, respectively.     

A positive-working photosensitive alkaline-developable polyimide with a highly dimensional stability and low dielectric constant based on poly(amic acid) as a polyimide precursor and diazonaphthoquinone as a photosensitive compound

A positive-working photosensitive polyimide precursor based on fluorinated poly(amic acid) (FPAA) and 2,3,4-tris(1-oxo-2-diazonaphthoquinon-4-ylsulfonyloxy)benzophenone (D4SB) as a photosensitive compound has been developed. FPAA was prepared by ring-opening polyaddition of dianhydrides, pyromellitic dianhydride and biphenyltetracarboxylic dianhydride, with diamine, 2,2′-bis(trifluoromethyl)benzidine, in methanol. The FPAA film showed excellent transparency to UV light and good solubility in a wide range of organic solvents. The dissolution behavior of FPAA containing 30 wt % D4SB after exposure was studied, and it was found that the difference of dissolution rate between exposed and unexposed parts was enough to get high contrast due to the photochemical reaction of D4SB in the polymer film. The photosensitive fluorinated polyimide (FPI) precursor containing 30 wt % D4SB showed a sensitivity of 80 mJ cm⁻² and a contrast of 7.8 with 365 nm light when it was developed with 0.3% aqueous tetramethyl ammonium hydroxide solution at room temperature. The FPI film cured up to 360°C had a low coefficient of thermal expansion of 10.3 ppm °C⁻¹ and a low dielectric constant of 3.04. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2261–2267, 1998     

Synthesis of maremycins A and D1 via cycloaddition of a nitrone with (E)-3-ethylidene-1-methylindolin-2-one

A concise synthesis of maremycins A and D1 has been accomplished via cycloaddition of a chiral cyclic nitrone with ( E)-3-ethylidene-1-methylindolin-2-one as a key step. This synthesis clarifies the stereochemistry of the maremycins and is suitable for large-scale synthesis for biological screening.