Ferromagnetism in a dinuclear nickel(II) complex containing triethylenetetramine and tricyanomethanide

Triethylenetetramine (L(4)) was used as a tetradentate blocking ligand that, after complexation with Ni(II), leaves two sites ready for ligation with tricyanomethanide. The formed binuclear complex [L(4)Ni(NCC(CN)CN)(2)NiL(4)](ClO(4))(2) exhibits a ferromagnetic coupling with J/hc = +0.15 cm(-1) and g(Ni) = 2.126; below 16 K, a ferromagnetic ordering is evidenced by ac magnetic susceptibility (both in-phase and out-of-phase), magnetization, field-cooled magnetization, and zero-field-cooled magnetization measurements.     

Inkjet printing of well-defined polymer dots and arrays

Inkjet printing represents a highly promising polymer deposition method, which is used for, for example, the fabrication of multicolor polyLED displays and polymer-based electronics parts. The challenge is to print well-defined polymer structures from dilute solution. We have eliminated the formation of ring stains by printing nonvolatile acetophenone-based inks on a perfluorinated substrate using different polymers. (De)pinning of the contact line of the printed droplet, as related to the choice of solvent, is identified as the key factor that determines the shape of the deposit, whereas the choice of polymer is of minor importance. Adding 10 wt % or more of acetophenone to a volatile solvent (ethyl acetate)-based polymer solution changes the shape of the deposit from ring-like to dot-like, which may be due to the establishment of a solvent composition gradient. Arrays of closely spaced dots have also been printed. The size of the dots is considerably smaller than the nozzle diameter. This may prove a potential strategy for the inkjet printing of submicrometer structures.     

Evaluation of a new multiple-layer spotting technique for matrix-assisted laser desorption/ionization time-of-flight mass spectrometry of synthetic polymers

A new multiple-layer matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOFMS) sample-spotting technique is described. This fast and easy technique was evaluated with poly(ethylene glycol) (PEG) standards and optimized conditions for these synthetic polymers were obtained. PEGs up to 35 kDa were detectable with this approach and single monomer resolution was observed up to 20 kDa. The spotting was performed using a multiple-layer approach, which offers the capability of complex sample preparation without the requirement of premixing the different matrix, analyte and doping salt solutions. The technique reduces the time required for sample preparation and offers high flexibility with respect to sample composition and solvents utilized for the crystallization of the compounds. The technique is thus perfectly suited for applications in combinatorial material research.     

Radon as a tracer to determine the mean residence times of groundwater in decontamination reactors

The groundwater at a former gasoline production site in Germany is heavily contaminated with aromatic hydrocarbons (mostly benzene) and is currently being treated in bioreactors under anaerobic conditions. To determine the reaction kinetics it is essential to know the mean residence time of the groundwater in these reactors. Most of the commonly used tracers (dyes and salts) did not give reliable results because of their interaction with the mineral matrix in the reactors. In this study radon (²²²Rn) dissolved in the groundwater is used as the tracer. The flow rate of groundwater through the reactors is 1 l/h. Over a period of 8 hours the radon-spiked groundwater was injected into the natural groundwater which has a very low radon concentration. The radon concentration of the discharged water is measured online at the reactor outlet. An increasing radon concentration at the reactor exit indicates the shortest residence time of the water. The time-dependent progress of the radon concentration provides detailed information about the flow behavior and residence times of water in the reactor.     

Titanocen-cyandithioformiat-Komplexe

The reaction of titanocene dichloride,Cp ₂TiCl₂ (Cp=⁵-C₅H₅), with one or two equivalents of sodium cyanodithioformate affords the new mono- or bis(dithiocarboxylato) derivativesCp ₂TiCl(S₂CCN) (1) andCp ₂Ti(S₂CCN)₂ (2). Elimination of sulfur converts2 into the metallacyclicCp ₂TiS₂C₂(CN)₂ (3), which does not react with the diene isoprene, but can be reconverted into the appropriate titanocene dihalides by chlorine or bromine.

     

Stille-type cross-coupling-An efficient way to various symmetrically and unsymmetrically substituted methyl-bipyridines: toward new ATRP catalysts

Various mono- and disubstituted 2,2'-bipyridines were synthesized in high yields and multigram scales utilizing Stille-type coupling procedures. The corresponding bromo-picoline and tributyltin-picoline building blocks were prepared from commercially available amino-picoline compounds. As first examples of metal complexes, 4,5'-dimethyl-2,2'-bipyridine was reacted with copper(II) and iron(II) ions and investigated as catalyst in ATRP.     

Synthese und Charakterisierung funktionalisierter β‐Hydroxydithiozimtsäuren und deren Ester. Komplexchemisches Verhalten gegenüber Nickel(II), Palladium(II) und Platin(II)

Synthesis and Analytical Characterization of Functionalized β‐Hydroxydithiocinnamic Acids and their Esters. Complex Chemistry towards Nickel(II), Palladium(II), and Platin(II) Starting from silyl‐protected 4‐hydroxy acetophenone ( 1 ) the 1,1‐ethenedihiolato complexes 3 – 5 were synthesised using carbon disulfide and potassium‐tert‐butylate as a base. After being deprotected, the resulting 4‐hydroxy‐substituted complexes 6 – 8 were esterified with DL‐α‐lipoic acid to obtain the compounds 9 – 11 . The resulting complexes were characterized using NMR spectroscopy, mass spectrometry and IR spectroscopy. 3‐substituted β‐hydroxydithiocinnamic acid methyl ester ( 12 ) was obtained via an analogous path of reaction using silyl‐protected 3‐hydroxy acetophenone ( 2 ), carbon disulfide and methyl iodide. After removing of the silyl group the resulting hydroxy group was esterified with DL‐α‐lipoic acid. Using the dithioacid ester 14 as a ligand the Ni^II ( 15 ), Pd^II ( 16 ) and Pt^II ( 17 ) [O,S] complexes were obtained.