Über Effekte zweiter Ordnung bei Biegung und Torsion dünnwandiger Rohre elliptischen Querschnitts

Zusammenfassung Mittels einfacher Gleichgewichtsbetrachtungen wird gezeigt, daÜ bei der Biegung eines dünnwandigen Rohres von elliptischem Querschnitt neben den Längsspannungen der elementaren Biegungstheorie auch Biegungsspannungen auftreten, deren EinfluÜ bei geringer Wandstärke im Vergleich zu den Ellipsenachsen nicht zu vernachlässigen ist, vor allem wegen der Verformung des Querschnitts, den sie zur Folge haben. Diese Abplattung der Ellipse wird mit Hilfe des Castiglianoschen Satzes berechnet. Bei den zusätzlichen Biegungsspannungen und der zugeordneten Deformation handelt es sich um Effekte zweiter Ordnung, die eine Verminderung der Sicherheit gegen Einbeulen der Rohre verursachen. Entsprechende Betrachtungen werden für die Torsion angestellt, wobei gleichartige Ergebnisse erzielt werden. Die Aussage über die Herabsetzung der Instabilitätsgrenze ist nur qualitativer Art. Es wird eine einfache Anwendung auf das Bourdonsche Manometer gebracht und dabei die Erklärung der Tatsache gegeben, daÜ eine Röhrenfeder in den Endpunkten der groÜen Achse ihres Querschnittes zuerst aufreiÜt.Der Verfasser dankt Herrn Prof.L. Föppl für die Anregung dieser Arbeit, sowie für die überlassung der Gleichungen (25), (27), (36) aus unveröffentlichten Arbeiten.     

Metallo‐supramolecular micelles: Studies by analytical ultracentrifugation and electron microscopy

In aqueous solutions, amphiphilic block copolymers in which a polystyrene (PS) segment is connected to a poly(ethylene oxide) (PEO) block via a bis(2,2′:6′,2″‐ terpyridine ruthenium) complex can form micelles. Such micelles of the protomer type PS₂₀‐[Ru]‐PEO₇₀, according to the preparation procedure representing frozen micelles, were studied by sedimentation velocity and sedimentation equilibrium analysis in an analytical ultracentrifuge and by transmission electron microscopy, with different techniques applied for the sample preparation. The particles obtained were surprisingly multifarious in size. In ultracentrifugation experiments performed at relatively low salt concentrations, the distributions of the sedimentation coefficient s_20,w showed a pronounced peak at 9.6 S and a broad, only partly separated second peak around 14 S. The molar mass of the particles at the peak was around 430,000 g/mol, corresponding to an aggregation number of approximately 85. The average hydrodynamic diameter of the particles in the peak fraction was approximately 13 nm. In electron micrographs of negatively stained samples, spheres of diameters between 10 and 25 nm were the most abundant particles, but larger ones with a wide size range were also visible. The latter particles apparently were composed of smaller ones. The data from both sedimentation analysis and electron microscopy showed that (1) the studied compound formed primary micelles of diameters around 20 nm and (2) the primary micelles had a tendency toward aggregation. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3159–3168, 2003     

Application of enzyme-field effect transistor sensor arrays as detectors in a flow-injection analysis system for simultaneous monitoring of medium components. Part II. Monitoring of cultivation processes

Glucose, maltose, sucrose, lactose, ethanol and urea concentrations were monitored simultaneously during the cultivation of Escherichia coli and Saccharomyces cerevisiae by means of enzyme field effect transistors (EnFETs) applying glucose dehydrogenase (GDH), maltase (MAL)/GDH, invertase (INV)/GDH, β-galactosidase (β-GAL)/galactosedehydrogenase (GALDH), alcoholdehydrogenase (ADH)/aldehydedehydrogenase (ALDH), and urease. These enzymes were (co)immobilized on the pH sensitive gates of an eight-FET array. The FET array was integrated in a commercial FIA system.     

Properties of ITO films prepared by reactive magnetron sputtering

Indium tin oxide (ITO) thin films were deposited by mid frequency pulsed dual magnetron sputtering using a metallic alloy target with 10 wt.% tin in an atmosphere of argon and oxygen. The aim of the work was to study the interdependence of structural, electrical and optical properties of ITO films deposited in the reactive and transition target mode, respectively. The deposition rate in the transition mode exceeds the deposition rate in the reactive mode by a factor of six, a maximum value of 100 nm·m min⁻¹ could be achieved. This corresponds to a static deposition rate of 200 nm min⁻¹. The lowest electrical resistivity of 1.1·10⁻³ Ω cm was measured at samples deposited in the high oxygen flow range in the transition mode. The samples show a good transparency in the visible range corresponding to extinction coefficients being below 10⁻². X-ray diffraction was used to characterise crystalline structure as well as film stress. ITO films prepared in the transition mode show a slightly preferred orientation in (211) direction, whereas films deposited in the reactive mode are strongly (222) oriented. Compared to undoped In₂O₃ all samples have an enlarged lattice. The lattice strain perpendicular to the surface is about 0.8% and 2.0% for films grown in the transition and the reactive mode, respectively. Deposition in the transition mode introduces a biaxial film stress in the range of −300 MPa, while stress in reactive mode samples is −1500 MPa.     

Supramolecular structures of macromolecules containing bipyridine–copper(I) complexes as revealed from transmission electron microscopy studies

Transmission electron microscopy (TEM) studies on bipyridine (bpy) containing block copolymer systems showed the formation of nanoscopic polymer–ion complexes through complexation with copper(I) ions which segregated to highly ordered columnar domains of mesoscopic dimensions. The domains, i.e. stacks of [(bpy)₂Cu(I)] complex moieties could be visualized by complementary TEM techniques. First, electron energy loss spectra (EELS) showed the absorption edges of copper and nitrogen, which are specific for the bipyridine copper complexes. The element spectroscopic imaging (ESI) technique allowed the imaging of the net copper and net nitrogen distribution, and the coinciding pictures exhibited a microphase separated system in the case of a 3-block copolymer with complexed end segments. High resolution elastic bright field images showed interference lines with a line to line distance of about 8 A which could be related to the Cu–Cu distance in staggered Cu(I)–bipyridine complexes. Received: 6 August 1997 Accepted: 28 April 1998