Light-regulated electrostatic interactions in colloidal suspensions

The net charge of a colloidal particle was controlled using light and a new photocleavable self-assembled monolayer (SAM). The SAM contained a terminal ammonium group and a centrally located carboxylic acid group that was masked with an ortho-nitrobenzyl functionality. Once exposed to UV light, the 2-nitrobenzyl group was cleaved, therefore transforming the colloidal particle from a net positive (silica-SAM-NH3+) to a net negative (silica-SAM-COO-) charge. By varying the UV exposure time, their zeta potential could be tailored between +26 and -60 mV at neutral pH. To demonstrate a photoinduced gel-to-fluid phase transition, a binary colloidal suspension composed of silica-SAM-NH3+ and negatively charged, rhodamine-labeled silica particles was mixed to form a gel. Exposure to UV light rendered all of the particles negative and therefore converted the system into a colloidal fluid that settles to form a dense sediment.     

Resolving Component Overlap in Multiwavelength Kinetic Spectroscopy: Application to Raman Scattering from Intermediates in Triplet-State Photoreactions

Abstract— Understanding of reaction mechanisms in photochemistry is advanced both by kinetic measurements to determine rates of reaction and by spectroscopic studies of the structures of precursors and photoproducts. When kinetics and spectroscopy are combined in a time-resolved, multiwavelength spectroscopic measurement on a reacting system, spectra and structures of intermediates can also be determined. In this paper, the application of multidimensional least-squares and factor analysis techniques for resolving overlapped spectra from intermediates in photochemical kinetics are discussed. The methods are employed specifically to resolve Raman spectra of intermediates in triplet-state photoreactions. By varying excitation intensity, spectra of excited-triplet states are resolved from ground states and solvent. By varying the concentration of a triplet quencher in the sample, the Raman spectrum of a sensitizer excited state (benzophe-none) can be resolved from those of acceptor-triplet states or radical photoproducts. Applications of these concepts in other areas of photochemical kinetics are addressed.     

Integral approximations for molecular orbital theory

The electron repulsion integrals arising in LCAO-MO theory are approximated by replacement of the product of two orbitals on different centers by linear combinations of one-center products. The approximation differs from those previously proposed in that the coefficients of the various terms are determined by requiring agreement for certain integrals, and in the emphasis of the role of symmetry in selecting the one-center products. For two-center integrals, the new approximation is significantly better than older approximate methods. Reasons are given for expecting this improvement to extend also to multi-center integrals.

---

Zusammenfassung Es wird ein Verfahren zur näherungsweisen Berechnung von Elektronenwechselwirkungsintegralen der LCAO-MO-Theorie beschrieben, bei welchem das Produkt zweier Zustandsfunktionen an verschiedenen Zentren durch eine Linearkombination von Produkten am gleichen Zentrum ersetzt wird. Der Unterschied zu ähnlichen Ansätzen liegt in der Justierung der Koeffizienten. Für Zweizentrenintegrale liefert die hier vorgeschlagene Methode bedeutend bessere Ergebnisse als das Mulliken-Verfahren.

---

Résumé Les intégrales de répulsion électroniques intervenant dans la théorie LCAO MO sont calculées d'une manière approchée en remplaçant le produit de deux orbitales sur des centres différents par des combinaisons linéaires de produits à un centre. Cette approximation diffère de celles proposées auparavant par la détermination des coefficients des différents termes au moyen de l'ajustement de certaines intégrales et par l'importance du rôle de la symétrie dans le choix des produits monocentriques. Cette nouvelle approximation est bien meilleure que les anciennes en ce qui concerne les intégrales bi-centriques. Nous donnons des raisons d'espérer que cette amélioration s'étendra aux intégrales polycentriques.

     

Ab initio MO-SCF calculation on a model of anomalous water

Ab initio calculations are carried out on the planar hexamer model of anomalous water using a variety of basis sets. The results are compared to results of similar calculations on free water and water in the ice I-like puckered ring configurations.

---

Zusammenfassung Es werden ab initio-Rechnungen für das planare Hexamer-Modell von anomalem Wasser unter Verwendung mehrerer BasissÄtze durchgeführt. Die Ergebnisse werden mit Resultaten Ähnlicher Rechnungen über freies Wasser und Wasser in der I-Eis Ähnlichen Konfiguration verzerrter Ringe verglichen.

---

Résumé Calculs ab initio sur le modèle hexamérique plan de l'eau anormale en utilisant différentes bases. Les résultats sont comparés à ceux de calculs similaires sur l'eau libre et sur l'eau dans une configuration cyclique compacte analogue à celle de la glace I.

     

Stress development during drying of calcium carbonate suspensions containing carboxymethylcellulose and latex particles

Stress development during drying of coatings produced from aqueous dispersions of calcium carbonate particles in the presence and absence of organic binders was studied using a controlled-environment stress apparatus that simultaneously monitored drying stress, weight loss, and relative humidity. Specifically, the influence of two organic binders on drying stress evolution was investigated: (1) carboxymethylcellulose, a water-soluble viscosifying aid, and (2) a styrene-butadiene latex emulsion of varying glass transition temperature. The stress histories exhibited three distinct regions. First, a period of stress rise was observed, which reflected the capillary tension exerted by the liquid on the particle network. Second, a maximum stress was observed. Third, it was followed by a period of either stress decay or rise depending on the organic species present. Significant differences in stress histories were observed between coatings containing soluble and nonsoluble binders. Maximum drying stresses (sigmamax) of 0.2-0.5 MPa were observed for coatings produced from pure calcium carbonate or calcium carbonate-latex suspensions, whereas coatings with carboxymethylcellulose exhibited substantially higher sigmamax values of 1-2 MPa. Upon drying, these coatings were quite hygroscopic, such that cyclic variations in relative humidity induced large cyclic changes in residual stress.     

Nickel oxidation states of F(430) cofactor in methyl-coenzyme M reductase

Magnetic circular dichroism (MCD) spectroscopy and variable-temperature variable-field MCD are used in combination with density functional theory (DFT) and time-dependent DFT (TD-DFT) calculations to characterize the so-called ox1-silent, red1, and ox1 forms of the Ni-containing cofactor F430 in methyl-coenzyme M reductase (MCR). Previous studies concluded that the ox1 state, which is the precursor of the key reactive red1 state of MCR, is a Ni(I) species that derives from one-electron reduction of the Ni(II)-containing ox1-silent state. However, our absorption and MCD data provide compelling evidence that ox1 is actually a Ni(II) species. In support of this proposal, our DFT and TD-DFT calculations indicate that addition of an electron to the ox1-silent state leads to formation of a hydrocorphin anion radical rather than a Ni(I) center. These results and biochemical evidence suggest that ox1 is more oxidized than red1, which prompted us to test a new model for ox1 in which the ox1-silent species is oxidized by one electron to form a thiyl radical derived from coenzyme M that couples antiferromagnetically to the Ni(II) ion. This alternative ox1 model, formally corresponding to a Ni(III)/thiolate resonance form but with predicted S = 1/2 EPR parameters reminiscent of a Ni(I) (3dx2-y2)1 species, rationalizes the requirement for reduction of ox1 to yield the red1 species and the seemingly incongruent EPR and electronic spectra of the ox1 state.     

Further solvent-free reactions of ferrocenylaldehydes: Synthesis of 1,1′-ferrocenyldiimines and ferrocenylacrylonitriles

Grinding of 1,1′-ferrocenedicarboxaldehyde with a 2.2 molar equivalent of an aromatic amine in a solvent-free environment provided excellent yields of 1,1′-ferrocenyldiimines. After mixing the aldehyde and amines, a gum or melt formed which eventually solidified to the product. An analytically pure sample of the product was obtained by cold recrystallization. Grinding of ferrocenecarboxaldehyde and 4-substituted phenylacetonitriles under solvent-free conditions provided good yields of the corresponding ferrocenylacrylonitriles. The yield in this reaction was very low when the substituent group para to the acetonitrile group was electron-donating.     

Structural and rate studies of the 1,2-additions of lithium phenylacetylide to lithiated quinazolinones: influence of mixed aggregates on the reaction mechanism

The 1,2-addition of lithium phenylacetylide (PhCCLi) to quinazolinones was investigated using a combination of structural and rate studies. (6)Li, (13)C, and (19)F NMR spectroscopies show that deprotonation of quinazolinones and phenylacetylene in THF/pentane solutions with lithium hexamethyldisilazide affords a mixture of lithium quinazolinide/PhCCLi mixed dimer and mixed tetramer along with PhCCLi dimer. Although the mixed tetramer dominates at high mixed aggregate concentrations and low temperatures used for the structural studies, the mixed dimer is the dominant form at the low total mixed aggregate concentrations, high THF concentrations, and ambient temperatures used to investigate the 1,2-addition. Monitoring the reaction rates using (19)F NMR spectroscopy revealed a first-order dependence on mixed dimer, a zeroth-order dependence on THF, and a half-order dependence on the PhCCLi concentration. The rate law is consistent with the addition of a disolvated PhCCLi monomer to the mixed dimer. Investigation of the 1,2-addition of PhCCLi to an O-protected quinazolinone implicates reaction via trisolvated PhCCLi monomers.     

A novel indicator series for measuring pKa values in acetonitrile

A series of substituted azobenzene dyes was found to span a range of 8 pK_a units in acetonitrile. The UV absorption spectra of the dyes are responsive to protonation, changing in both absorption maximum and intensity. These characteristics make the dyes useful as indicators for the measurement of pK_a values of neutral organic bases that absorb in the visible region of the spectrum.     

Picrylamino-substituted heterocycles. VI. Pyrimidines

The condensation of various aminopyrimidines with picryl chloride and picryl fluoride has been investigated as part of our continuing effort in the field of picrylamino-substituted heterocycles. Most of the aminopyrimidines that can tautomerize reacted with picryl fluoride to form picryl derivatives of their imino forms, but they gave picrylamino derivatives when they condensed with picryl chloride.