Microwave-enhanced electro-deposition and stripping of palladium at boron-doped diamond electrodes

In situ microwave activation has been applied to the electro-deposition and stripping of palladium metal (which is widely used as a catalyst) at cavitation resistant boron-doped diamond electrodes. Focused microwave radiation leading to heating, boiling, and cavitation is explored as an option to improve the speed and sensitivity of the analytical detection procedure. The deposition and anodic stripping of palladium by linear sweep voltammetry in 0.1 M KCl (pH 2) solution and at boron-doped diamond electrodes is shown to be strongly enhanced by microwave activation due to both (i) the increase in mass transport and (ii) the increase in the kinetic rate of deposition and stripping.The temperature at the electrode surface is calibrated with the reversible redox couple Fe(CN)₆⁴⁻/Fe(CN)₆³⁻ and found to be reach 380 K. In the presence of microwave radiation, the potential of onset of the deposition of palladium is strongly shifted positive from −0.4 to +0.1 V versus SCE. The optimum potential for deposition in the presence of microwaves is −0.4 V versus SCE and the anodic stripping peak current is shown to increase linearly with deposition time. Under these conditions, the stripping peak current varies linearly with the palladium concentration down to ca. 2 μM. At concentration lower than this a logarithmic variation of the stripping peak current with concentration is observed down to ca. 0.1 μM (for 5 min pre-concentration in presence of microwave radiation).     

Optimal tactics for close-support operations— III. Degraded intelligence and communications

A new generation of C³ (command, control, and communication) models for military cybernetics is developed. Recursive equations for the solution of the C³ problem are derived for an amphibious campaign with linear time-varying dynamics. Air and ground commanders are assumed to have no intelligence and no communications. Numerical results are given for the optimal decision rules.     

Protein binding to lanthanide(III) complexes can reduce the water exchange rate at the lanthanide

The GdIII-based magnetic resonance imaging contrast agent MS-325 targets the blood protein serum albumin, resulting in an increased efficacy (relaxivity) as a relaxation agent. MS-325 showed different relaxivities when bound to serum albumin from different species, e.g., r1=30.5 mM-1 s-1 (rabbit) vs 46.3 mM-1 s-1 (human) at 35 degrees C and 0.47 T. To investigate the mechanism for this difference, surrogate complexes were prepared where the GdIII ion was replaced by other LnIII ions. Fluorescence lifetime measurements of the EuIII analogue indicated that the hydration number was q=1 and did not change when bound to either human, rat, rabbit, pig, or dog serum albumin. The YbIII analogue, YbL1, was prepared and characterized by 1H NMR. Line-shape analysis of the paramagnetic-shifted 1H NMR resonances in the presence of increasing amounts of human (HSA) or rabbit (RSA) serum albumin allowed estimation of the transverse relaxation rate, R2, of these resonances for the protein-bound YbL1. The rotational correlation time of YbL1 was calculated from R2, and the Yb-H distance and was tauR=8+/-1 ns when bound to HSA and 13+/-2 ns when bound to RSA. The water exchange rate at the DyIII analogue, DyL1, was determined from variable-temperature R2 measurements at 9.4 T when DyL1 was bound to either HSA or RSA. At 37 degrees C, water exchange at DyL1 was (31+/-5)x10(6) s-1 when bound to HSA but (3.8+/-0.2)x10(6) s-1 when bound to RSA. Slower water exchange upon RSA binding explains the differences in relaxivity observed. The approach of using surrogate lanthanides to identify specific molecular parameters influencing relaxivity is applicable to other protein-targeted GdIII contrast agents.     

Boron‐Doped Diamond Dual‐Plate Deep‐Microtrench Device for Generator‐Collector Sulfide Sensing

A BDD‐BDD dual‐plate microtrench electrode with 6 μm inter‐electrode spacing is investigated using generator‐collector electrochemistry and shown to give microtrench depth‐dependent sulfide detection down to the μM levels. The effect of the microtrench depth is compared for a “shallow” 44 μm and a “deep” 180 μm microtrench and linked to the reduction of oxygen to hydrogen peroxide which interferes with sulfide redox cycling. With a deeper microtrench and a fixed collector potential at ?1.4 V vs. SCE, two distinct redox cycling potential domains are observed at 0.0 V vs. SCE (2‐electron) and at 1.1 V vs. SCE (6‐electron).     

Analysis of coumarin and angelica lactones in smokeless tobacco products

Differences in health risks between different styles of smokeless tobacco products (STPs) have prompted interest in their relative levels of toxic chemicals. We report here the development of methods for the analysis of STPs for coumarin and for α-angelica lactone (α-AL), both of which have been included in various published lists of tobacco toxicants. We have also determined the concentrations of these lactones in commercial STPs from the US and Sweden, representing 80–90% of the 2010 market share for all the major STP categories in these two countries: 65 products (plus two reference products) for coumarin and 66 commercial products for α-AL. For coumarin, methanol extracts of the STPs were analysed by HPLC/MS/MS. The lower limit of quantification (LOQ) and limit of detection (LOD) were, respectively, 100 and 30 ng coumarin/g of STP on a wet weight basis (WWB). Alpha-AL was determined via direct headspace GC/MS. The LOQ and LOD were 65 and 30 ng/g WWB respectively. Coumarin was detected In 3/33 Swedish snus, 5/13 US chewing tobaccos, 16/16 moist snuffs and 5/6 dry snuffs. Concentrations in those samples with quantifiable coumarin contents ranged from 186 to 1656 ng/g WWB. Concentrations of coumarin measured in this study were consistent with levels naturally found in tobacco. None of the STPs analysed would significantly contribute to coumarin exposure in consumers compared with dietary sources, and estimated exposure levels were 1000× lower than the European Food Safety Authority Tolerable Daily Intake. Hence the relevance of coumarin to the toxicity of STPs and its inclusion in the FDA’s list of harmful and potentially harmful compounds list is questionable. Measurements of α-AL in these STPs found that the majority did not have quantifiable contents, however, for three STPs concentrations of α-AL were above the LOQ (116–140 ng/g WWB) and for four other STPs concentrations of α-AL could be estimated between the LOD and LOQ. Beta-angelica lactone was tentatively identified in three of the STPs but the levels could not be reliably quantified. The levels of α-AL in tobacco products are reported here for the first time, but the relevance of α-AL to the toxicity of STPs is also highly questionable given that it has GRAS status as a permitted food additive.     

Electrically Conductive Polyacetylene/Elastomer Blends

Polymer blends of polyacetylene with elastomers such as polybutadiene and thermoplastic elastomers such as the styrene-butadiene-styrene copolymers have been prepared and examined. The resultant blends were charcterized by infrared spectroscopy, thermal analysis, x-ray diffraction techniques, and transmission electron microscopy. The blends were found to exist as two-phase systems consisting of crystalline polyacetylene and an amorphous rubbery component. In the case of the thermoplastic elastomer blends, electron microscopy revealed that polyacetylene was incorporated in the rubber matrix rather than the glassy polystyrene domains. Doping blends with electron acceptors such as iodine and ferric chloride resulted in electrical conductivities in the 10–100 ohm-l cm-’ range. Further enhancement of the electrical conductivity of the blends was obtained by stretch elongation of the blends prior to doping. Details of the physical properties of these blends and their microstructure will be presented.