Using an electrical potential to reversibly switch surfaces between two states for dynamically controlling cell adhesion

Smart surfaces presenting both antifouling molecules with a charged functional group at their distal end, and molecules that are terminated by RGD peptides for cell adhesion, were fabricated and characterized (see picture). By applying potentials of +300 or -300?mV, the surfaces could be dynamically switched to make the peptide accessible or inaccessible to cells.     

Ab initio MO study of selected aluminum and boron chlorides and fluorides: Comparison with 11B NMR spectra of a tetrachloroborate melt

Molecular geometries were fully optimized for AlCl₃, AlCl₄^-, Al₂Cl₆, Al₂Cl₇^-, AlF₃, AlF₄^-, Al₂F₆, Al₂F₇^-, BCl₃, BCl₄^-, B₂Cl₆, B₂Cl₇^-, BF₃, BF₄^-, B₂F₆, and B₂F₇^-, as well as a few mixed halogen species, at the Hartree-Fock (HF) level, using basis sets from STO-3G to 6–311 + G(d). In some cases geometries were also optimized at the MP2 level. Where possible, the computed geometries were compared to known structures from electron or X-ray diffraction. The agreement between these was quite good for the neutral species, and somewhat poorer for the anions. Vibrational frequencies were calculated for all species at the HF level with the largest basis set. The geometries were characterized as minima or transition structures. Various formation reaction enthalpies were calculated; these compare well with known values. More extensive calculations on the BF₃/BF₄^- system indicate the structures and enthalpies are nearly converged with respect to basis set size and level of correlation treatment. The previously unknown species B₂Cl₇^- is predicted to be energetically stable on the basis of the calculations. Some features of the ¹¹B NMR spectra of room temperature melts consisting of mixtures of boron trichloride with 1-methyl-3-ethylimidazolium chloride are presented. These features suggest that these melts may contain small amounts of B₂Cl₇^- as an intermediate in an exchange reaction. © 1996 by John Wiley & Sons, Inc.     

Controlled Fabrication of Cd-Bi Nanoparticles via Sonochemical Method

IntroductionMetal or alloy nanoparticles,because of their con-spicuous physicochemical properties,have been widelyapplied to various fields such as electronics,catalysis,magnetism,and corrosion-resistant materialsfields[1—4].It has been estimated that the particle sizeand the properties of nanoparticles depend strongly onthe specific method of fabrication and the applied ex-periment conditions,which makes the controlled syn-thesis of nanomaterials become an increasingly activeand important ar…     

A Comparative Study of Electrochemical Reduction of 4‐Nitrophenyl Covalently Grafted on Gold and Carbon

4‐Nitrophenyl layers were grafted on gold and glassy carbon surfaces by electrochemical reductive adsorption of the corresponding diazonium salt. Electrochemical conversion efficiencies of 4‐nitrophenyl moieties to 4‐aminophenyl moieties on gold versus on glassy carbon in a protic medium were investigated using X‐ray photoelectron spectroscopy (XPS). In total contrast to all previous comparative studies showing greater electrochemical reactivity of aryl diazonium salt‐derived layers on gold than on glassy carbon, a much lower rate of conversion to 4‐aminophenyl was observed on gold than on glassy carbon by both cyclic voltammetry (CV) and chronoamperometry (CA) methods. The lower electron transfer rate during conversion observed on gold versus glassy carbon was proposed to be due to a mechanism related to the molecular structure rearrangement of 4‐nitrophenyl during the process on glassy carbon. However, whilst complete conversion of 4‐nitrophenyl to 4‐aminophenyl on gold by chronoamperometry was achieved, on glassy carbon complete reduction could not be achieved under the same conditions.     

Automated peak width measurements for targeted analysis of ion mobility unresolved species

Peak broadening in ion mobility (IM) is a relatively predictable process and abnormally broad peaks can be indicative of the presence of unresolved species. Here, we introduce a new ion mobility peak fitting (IM_FIT) software package for automated and systematic determination of traveling wave ion mobility (TWIM) unresolved species. To identify IM unresolved species, the IM_FIT software generates a trend line by plotting ions' mobility peak widths as a function of their arrival times. Utilizing user-defined thresholds, IM_FIT allows for automated and rapid detection of ions that deviate from the peak width trend line. To demonstrate the advantages of IM_FIT for automated detection of IM unresolved species, IM-mass spectrometry (IM-MS) data from a sample mixture containing polypropylene glycol and multiple peptides were analyzed. A total of 14 out of the 34 observed singly-charged IM peaks above 5% relative abundance (i.e., signal-to-noise ratios above ∼200) were tagged as potentially co-eluting ions by IM_FIT. Subsequently, the 14 IM peaks tagged as potentially unresolved (presumably, peaks corresponding to co-eluting compounds), were further analyzed by automated IM deconvolution (AIMD), liquid chromatography-IM-MS (LC-IM-MS), and/or ultra-high resolution mass spectrometry. Using the aforementioned techniques, more than 85% of the tagged IM peaks (12 out of 14) were confirmed to contain co-eluting ions. As an additional new finding, IM_FIT facilitated the discovery of an unexpected sequence-scrambled y-type fragment ion.     

Speciation and biosynthetic variation in four dictyoceratid sponges and their cyanobacterial symbiont, Oscillatoria spongeliae

Four species of marine sponges (Phylum Porifera, Order Dictyoceratida), which contain the filamentous cyanobacterial symbiont Oscillatoria spongeliae, were collected from four locations in Palau. The halogenated natural products associated with the symbiont were characterized from each sample, revealing that each species contained either chlorinated peptides, brominated diphenyl ethers, or no halogenated compounds. Analysis of the host sponges and the symbionts indicated that each species of sponge contained a distinct strain of morphologically similar cyanobacteria. Although cospeciation may be present in this group, we have identified that at least one host switching event has occurred in this symbiosis. Only the strain of O. spongeliae in the sponge containing the chlorinated compounds possessed genes involved in the biosynthesis of chlorinated leucine precursors, indicating that the chemical variation observed in these animals has a genetic foundation.     

Competition between DPPC and SDS at the air-aqueous interface

Vibrational sum frequency generation spectroscopy is used to study the interactions of the charged soluble organic surfactant sodium dodecyl sulfate (SDS) with an insoluble 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) monolayer at the air-aqueous interface. Results indicate that the surfactant species compete for surface sites in the mixed system, with a lower monolayer number density of DPPC molecules being observed in the presence of dodecyl sulfate anions at the interface. Spectroscopic results also indicate that fewer dodecyl sulfate chains reside at the interface when the insoluble DPPC film is present. Increased conformational ordering of the acyl chains of both the DPPC molecules and the interfacial dodecyl sulfate anions is observed in the mixed system. Additionally, charged surfactant SDS promotes the alignment of the interfacial water molecules even in the presence of a DPPC monolayer.     

Evaluating the accuracy of theoretical one‐bond 13C─13C scalar couplings and their ability to predict structure in a natural product

This study explores the feasibility of using a combination of experimental and theoretical 1‐bond ¹³C─¹³C scalar couplings (¹J_CC) to establish structure in organic compounds, including unknowns. Historically, ⁿJ_CC and ⁿJ_CH studies have emphasized 2 and 3‐bond couplings, yet ¹J_CC couplings exhibit significantly larger variations. Moreover, recent improvements in experimental measurement and data processing methods have made ¹J_CC data more available. Herein, an approach is evaluated in which a collection of theoretical structures is created from a partial nuclear magnetic resonance structural characterization. Computed ¹J_CC values are compared to experimental data to identify candidates giving the best agreement. This process requires knowledge of the error in theoretical methods, thus the B3LYP, B3PW91, and PBE0 functionals are evaluated by comparing to 27 experimental values from INADEQUATE. Respective errors of ±1.2, ±3.8, and ±2.3 Hz are observed. An initial test of this methodology involves the natural product 5‐methylmellein. In this case, only a single candidate matches experimental data with high statistical confidence. This analysis establishes the intramolecular hydrogen‐bonding arrangement, ring heteroatom identity, and conformation at one position. This approach is then extended to hydroheptelidic acid, a natural product not fully characterized in prior studies. The experimental/theoretical approach proposed herein identifies a single best‐fit structure from among 26 candidates and establishes, for the first time, 1 configuration and 3 conformations to complete the characterization. These results suggest that accurate and complete structural characterizations of many moderately sized organic structures (<800 Da) may be possible using only ¹J_CC data.     

Boundedness of Convolution Operators and Input–Output Maps between Weighted Spaces

We ask when convolution operators with scalar- or operator-valued kernel functions map between weighted L² spaces of Hilbert space-valued functions. For a certain class of decreasing weights, including negative powers (t + a)^−m for example, we solve the one-weight problem completely by using Laplace transforms and Bergman-type spaces of vector-valued analytic functions. For a much more general class of decreasing weights, we solve the one-weight problem for all positive real kernels (also for L^p(w) with p > 1), by results on Steklov operators which generalise the weighted Hardy inequality. When the kernel function is a strongly continuous semigroup of bounded linear Hilbert space operators, which arises from input–output maps of certain linear systems, then the most obvious sufficient condition for boundedness, obtained by taking norm signs inside the integrals, is also necessary in many cases, but not in general. Submitted: July 15, 2007.,Revised: November 19, 2007.,Accepted: December 14, 2007.     

Modelling for the planning and management of bed capacities in hospitals

The internal dynamics of a hospital represent a complex non-linear structure. Planning and management of bed capacities must be evaluated within an environment of uncertainty, variability and limited resources. A common approach is to plan and manage capacities based on simple deterministic spreadsheet calculations. This paper demonstrates that these calculations typically do not provide the appropriate information and result in underestimating true bed requirements. More sophisticated, flexible and necessarily detailed capacity models are needed. The development and use of such a simulation model is presented in this paper. The modelling work, in conjunction with a major UK NHS Trust, considers various types of patient flows, at the individual patient level, and resulting bed needs over time. The consequence of changes in capacity planning policies and management of existing capacities can be readily examined. The work has highlighted the need for evaluating hospital bed capacities in light of both bed occupancies and refused admission rates. The relationship between occupancy and refusals is complex and often overlooked by hospital managers.