Ring current effects in crystals. Evidence from 13C chemical shift tensors for intermolecular shielding in 4,7-di-t-butylacenaphthene versus 4,7-di-t-butylacenaphthylene

13C chemical shift tensor data from 2D FIREMAT spectra are reported for 4,7-di-t-butylacenaphthene and 4,7-di-t-butylacenaphthylene. In addition, calculations of the chemical shielding tensors were completed at the B3LYP/6-311G** level of theory. While the experimental tensor data on 4,7-di-t-butylacenaphthylene are in agreement with theory and with previous data on polycyclic aromatic hydrocarbons, the experimental and theoretical data on 4,7-di-t-butylacenaphthene lack agreement. Instead, larger than usual differences are observed between the experimental chemical shift components and the chemical shielding tensor components calculated on a single molecule of 4,7-di-t-butylacenaphthene, with a root mean square (rms) error of +/-7.0 ppm. The greatest deviation is concentrated in the component perpendicular to the aromatic plane, with the largest value being a 23 ppm difference between experiment and theory for the 13CH2 carbon delta11 component. These differences are attributed to an intermolecular chemical shift that arises from the graphitelike, stacked arrangement of molecules found in the crystal structure of 4,7-di-t-butylacenaphthene. This conclusion is supported by a calculation on a trimer of molecules, which improves the agreement between experiment and theory for this component by 14 ppm and reduces the overall rms error between experiment and theory to 4.0 ppm. This intermolecular effect may be modeled with the use of nuclei independent chemical shieldings (NICS) calculations and is also observed in the isotropic 1H chemical shift of the CH2 protons as a 4.2 ppm difference between the solution value and the solid-state chemical shift measured via a 13C-1H heteronuclear correlation experiment.     

Using an electrical potential to reversibly switch surfaces between two states for dynamically controlling cell adhesion

Smart surfaces presenting both antifouling molecules with a charged functional group at their distal end, and molecules that are terminated by RGD peptides for cell adhesion, were fabricated and characterized (see picture). By applying potentials of +300 or -300?mV, the surfaces could be dynamically switched to make the peptide accessible or inaccessible to cells.     

Ab initio MO study of selected aluminum and boron chlorides and fluorides: Comparison with 11B NMR spectra of a tetrachloroborate melt

Molecular geometries were fully optimized for AlCl₃, AlCl₄^-, Al₂Cl₆, Al₂Cl₇^-, AlF₃, AlF₄^-, Al₂F₆, Al₂F₇^-, BCl₃, BCl₄^-, B₂Cl₆, B₂Cl₇^-, BF₃, BF₄^-, B₂F₆, and B₂F₇^-, as well as a few mixed halogen species, at the Hartree-Fock (HF) level, using basis sets from STO-3G to 6–311 + G(d). In some cases geometries were also optimized at the MP2 level. Where possible, the computed geometries were compared to known structures from electron or X-ray diffraction. The agreement between these was quite good for the neutral species, and somewhat poorer for the anions. Vibrational frequencies were calculated for all species at the HF level with the largest basis set. The geometries were characterized as minima or transition structures. Various formation reaction enthalpies were calculated; these compare well with known values. More extensive calculations on the BF₃/BF₄^- system indicate the structures and enthalpies are nearly converged with respect to basis set size and level of correlation treatment. The previously unknown species B₂Cl₇^- is predicted to be energetically stable on the basis of the calculations. Some features of the ¹¹B NMR spectra of room temperature melts consisting of mixtures of boron trichloride with 1-methyl-3-ethylimidazolium chloride are presented. These features suggest that these melts may contain small amounts of B₂Cl₇^- as an intermediate in an exchange reaction. © 1996 by John Wiley & Sons, Inc.     

Controlled Fabrication of Cd-Bi Nanoparticles via Sonochemical Method

IntroductionMetal or alloy nanoparticles,because of their con-spicuous physicochemical properties,have been widelyapplied to various fields such as electronics,catalysis,magnetism,and corrosion-resistant materialsfields[1—4].It has been estimated that the particle sizeand the properties of nanoparticles depend strongly onthe specific method of fabrication and the applied ex-periment conditions,which makes the controlled syn-thesis of nanomaterials become an increasingly activeand important ar…     

Evaluating the accuracy of theoretical one‐bond 13C─13C scalar couplings and their ability to predict structure in a natural product

This study explores the feasibility of using a combination of experimental and theoretical 1‐bond ¹³C─¹³C scalar couplings (¹J_CC) to establish structure in organic compounds, including unknowns. Historically, ⁿJ_CC and ⁿJ_CH studies have emphasized 2 and 3‐bond couplings, yet ¹J_CC couplings exhibit significantly larger variations. Moreover, recent improvements in experimental measurement and data processing methods have made ¹J_CC data more available. Herein, an approach is evaluated in which a collection of theoretical structures is created from a partial nuclear magnetic resonance structural characterization. Computed ¹J_CC values are compared to experimental data to identify candidates giving the best agreement. This process requires knowledge of the error in theoretical methods, thus the B3LYP, B3PW91, and PBE0 functionals are evaluated by comparing to 27 experimental values from INADEQUATE. Respective errors of ±1.2, ±3.8, and ±2.3 Hz are observed. An initial test of this methodology involves the natural product 5‐methylmellein. In this case, only a single candidate matches experimental data with high statistical confidence. This analysis establishes the intramolecular hydrogen‐bonding arrangement, ring heteroatom identity, and conformation at one position. This approach is then extended to hydroheptelidic acid, a natural product not fully characterized in prior studies. The experimental/theoretical approach proposed herein identifies a single best‐fit structure from among 26 candidates and establishes, for the first time, 1 configuration and 3 conformations to complete the characterization. These results suggest that accurate and complete structural characterizations of many moderately sized organic structures (<800 Da) may be possible using only ¹J_CC data.     

Heterocyclic compounds from 3-(4-phenyl) benzoyl propionic acid

3-(4-Phenyl) benzoyl propionic acid was used as the starting material for the synthesisof furanones (2), pyrrolinones (5), pyridazinones (7), benzoxazinones (8) and quinazolinones (9-11). The behaviour of the derivatives of furanones and benzoxazinones toward different nucleophiles is reported.     

几种乙酸铵离心法测定土壤阳离子交换量的方法探讨

乙酸铵离心交换法测定酸性和中性土壤阳离子交换量是经典方法,但此方法的蒸馏过程繁琐、时间长、效率低。本文引用纳氏试剂分光光度法测定土壤CEC值,并将结果与乙酸铵离心法常用的几种传统测定方法进行了实验对比和总结。通过对国家标准样品及实际土壤样品的CEC值测定,纳氏试剂比色法的精密度在2-4%之间,准确度与经典方法一致。与传统滴定法比较,取代了蒸馏的步骤,测定方法简单,干扰少,结果可靠,可操作性强。     

Ruthenium‐Containing Linear Helicates and Mesocates with Tuneable p53‐Selective Cytotoxicity in Colorectal Cancer Cells

The ligands L¹ and L² both form separable dinuclear double‐stranded helicate and mesocate complexes with Ru^II. In contrast to clinically approved platinates, the helicate isomer of [Ru₂( L¹ )₂]⁴⁺ was preferentially cytotoxic to isogenic cells (HCT116 p53^?/?), which lack the critical tumour suppressor gene. The mesocate isomer shows the reverse selectivity, with the achiral isomer being preferentially cytotoxic towards HCT116 p53^+/+. Other structurally similar Ru^II‐containing dinuclear complexes showed very little cytotoxic activity. This study demonstrates that alterations in ligand or isomer can have profound effects on cytotoxicity towards cancer cells of different p53 status and suggests that selectivity can be “tuned” to either genotype. In the search for compounds that can target difficult‐to‐treat tumours that lack the p53 tumour suppressor gene, [Ru₂( L¹ )₂]⁴⁺ is a promising compound for further development.     

Studies of all-trans-retinal as a photooxidizing agent

The photophysical properties of all-trans-retinal (RAL) have been extensively studied because of the importance of the retinoids in the visual process. However, little information is available regarding the participation of RAL in photochemical transformations such as photoxidation. RAL is one of several native chromophores that have been suggested to act as photosensitizers of damage in the human retina, and this damage would likely occur through oxidative pathways. Time-resolved and steady state techniques have been used to examine the photoreactivity of RAL toward several suitable substrates. The lifetime of the RAL triplet excited state is observed to decrease with increasing concentration of the well-known electron and hydrogen atom donors, 2,3,5,6-tetramethyl-1,4-phenylenediamine (DAD), hydroquinone (HQ), methylhydroquinone (MHQ), 2,3-dimethylhydroquinone (DMHQ) and trimethylhydroquinone (TMHQ), although the bimolecular rate constants for the reaction are much less than that of diffusion controlled (2.9 x 10(7) M-1 s-1, 1.2 x 10(5) M-1 s-1, 1.2 x 10(5) M-1 s-1, 1.5 x 10(5) M-1 s-1 and 1.6 x 10(6) M-1 s-1, for DAD, HQ, MHQ, DMHQ and TMHQ, respectively). In the presence of the donors, new absorptions grow concomitant with the decay of the triplet excited state, and for DAD and TMHQ, the observed spectra are similar to the spectra of p-phenylenediamine and TMHQ radicals. Irradiation of RAL in argon-saturated methanol results in fairly efficient photobleaching of RAL and in the formation of two new compounds having absorption spectra that are shifted below 300 nm. Irradiation of RAL in argon-saturated acetonitrile also results in photobleaching of RAL, but the reaction proceeds at a slower rate.     

Continuous flow stable isotope methods for study of delta(13)C fractionation during halomethane production and degradation

Gas chromatography/mass spectrometry/isotope ratio mass spectrometry (GC/MS/IRMS) methods for delta(13)C measurement of the halomethanes CH(3)Cl, CH(3)Br, CH(3)I and methanethiol (CH(3)SH) during studies of their biological production, biological degradation, and abiotic reactions are presented. Optimisation of gas chromatographic parameters allowed the identification and quantification of CO(2), O(2), CH(3)Cl, CH(3)Br, CH(3)I and CH(3)SH from a single sample, and also the concurrent measurement of delta(13)C for each of the halomethanes and methanethiol. Precision of delta(13)C measurements for halomethane standards decreased (+/-0.3, +/-0.5 and +/-1.3 per thousand) with increasing mass (CH(3)Cl, CH(3)Br, CH(3)I, respectively). Given that carbon isotope effects during biological production, biological degradation and some chemical (abiotic) reactions can be as much as 100 per thousand, stable isotope analysis offers a precise method to study the global sources and sinks of these halogenated compounds that are of considerable importance to our understanding of stratospheric ozone destruction.