Synthesis and Characterization of SnO2 Nanopowder Prepared by Precipitation Method

Tetragonal SnO₂ nanopowder of the range ～8 nm has been successfully synthesized by precipitation method. The prepared powder was characterized by thermogravimetry analysis (TGA), x-ray diffraction (XRD), transmission electron microscopy (TEM), Infrared spectroscopy (FTIR), x-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS), and room temperature photoluminescence (PL) spectroscopy. Experimental results show that the prepared powder was phase pure SnO₂ of tetragonal rutile structure without any impurities. The optical band gap was determined to be 4.26 eV, using diffuse reflectance technique with the aid of Kubelka-Munk relation. The blue shift of the band gap was attributed to the quantum size confinement effect.     

Preparation, characterization and application of thorium oxalate for sorption of plutonium and americium from aqueous solution

Synthetic inorganic exchangers exhibit good thermal and radiation stability. Thorium oxalate precipitate shows potential for co-precipitation of plutonium and americium from oxalate supernatant generated during plutonium oxalate precipitation. In the present study, efforts were made to prepare thorium oxalate precipitate to be used for column operation. Distribution ratios were determined to optimize conditions for sorption of plutonium and americium on thorium oxalate from nitric acid + oxalic acid solutions with composition similar to that of oxalate supernatant. Column experiments were also performed to evaluate the sorption capacity of thorium oxalate for plutonium and americium from the same medium. The result showed that, thorium oxalate prepared in 1.75M HNO₃ at 70 °C is suitable for column operations. These studies showed that plutonium and americium could be simultaneously removed from aqueous solutions with composition similar to plutonium oxalate waste using glass column packed with thorium oxalate and these nuclides could be recovered by eluting with 3M HNO₃.     

XRD and XPS characterization of mixed valence Mn3O4 hausmannite thin films prepared by chemical spray pyrolysis technique

Spray pyrolysis technique has been employed successfully for the synthesis of single phase mixed valence spinel hausmannite (Mn₃O₄) thin films using alcoholic start solution of manganese acetate (Mn(CH₃COO)₂·4H₂O) on pyrex glass substrates at atmospheric pressure using air as a carrier gas. Thermal decomposition of the precursor in the temperature range 320-490 °C led to the formation of Mn₃O₄ phase as revealed from the thermogravimetry analysis. Prepared samples are characterized by X-ray diffraction that shows spinel structure with space group I4₁/amd. Pure and well crystallized specimen is subjected to X-ray photoelectron spectroscopy for the surface chemistry investigation of these systems at a molecular level. Surface Mn/O ratio is compared to the bulk composition of the sample. Atomic force micrographs revealed that the morphology and the surface grains of the films largely influenced by the substrate temperature.     

Using massively parallel simulation and Markovian models to study protein folding: examining the dynamics of the villin headpiece

We report on the use of large-scale distributed computing simulation and novel analysis techniques for examining the dynamics of a small protein. Matters addressed include folding rate, very long time scale kinetics, ensemble properties, and interaction with water. The target system for the study, the villin headpiece, has been of great interest to experimentalists and theorists both. Sampling totaled nearly 500 mus-the most extensive published to date for a system of villin's size in explicit solvent with all atom detail-and was in the form of tens of thousands of independent molecular dynamics trajectories, each several tens of nanoseconds in length. We report on kinetics sensitivity analyses that, using a set of short simulations, probed the role of water in villin's folding and sensitivity to the simulation's electrostatics treatment. By constructing Markovian state models (MSMs) from the collected data, we were able to propagate dynamics to times far beyond those directly simulated and to rapidly compute mean first passage times, long time kinetics (tens of microseconds), and evolution of ensemble property distributions over long times, otherwise currently impossible. We also tested our MSM by using it to predict the structure of villin de novo.     

Direct calculation of the binding free energies of FKBP ligands

Direct calculations of the absolute free energies of binding for eight ligands to FKBP protein were performed using the Fujitsu BioServer massively parallel computer. Using the latest version of the general assisted model building with energy refinement (AMBER) force field for ligand model parameters and the Bennett acceptance ratio for computing free-energy differences, we obtained an excellent linear fit between the calculated and experimental binding free energies. The rms error from a linear fit is 0.4 kcal/mol for eight ligand complexes. In comparison with a previous study of the binding energies of these same eight ligand complexes, these results suggest that the use of improved model parameters can lead to more predictive binding estimates, and that these estimates can be obtained with significantly less computer time than previously thought. These findings make such direct methods more attractive for use in rational drug design.     

Synthesis of novel size exclusion chromatography support by surface initiated aqueous atom transfer radical polymerization

We report the use of aqueous surface-initiated atom transfer radical polymerization (SI-ATRP) to grow polymer brushes from a "gigaporous" polymeric chromatography support for use as a novel size exclusion chromatography medium. Poly(N,N-dimethylacrylamide) (PDMA) was grown from hydrolyzable surface initiators via SI-ATRP catalyzed by 1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA)/CuCl. Grafted polymer was characterized semiquantitatively by ATR-FTIR and also cleaved and quantitatively characterized for mass, molecular weight, and polydispersity via analytical SEC/MALLS. The synthesis provides control over graft density and allows the creation of dense brushes. Incorporation of negative surface charge was found to be crucial for improving the initiation efficiency. As polymer molecular weight and density could be controlled through reaction conditions, the resulting low-polydispersity grafted polymer brush medium is shown to be suitable for use as a customizable size exclusion chromatography medium for investigating the principals of entropic interaction chromatography. All packed media investigated showed size-dependent partitioning of solutes, even for low graft density systems. Increasing the molecular weight of the grafts allowed solutes more access to the volume fraction in the column available for partitioning. Compared to low graft density media, increased graft density caused eluted solute probes to be retained less within the column and allowed for greater size discrimination of probes whose molecular weights were less than 10(4) kDa.     

Stimuli‐responsive cationic terpolymers by RAFT polymerization: Synthesis,characterization, and protein interaction studies

The controlled synthesis and characterization of a range of stimuli responsive cationic terpolymers containing varying amounts of N‐isopropylacrylamide (NIPAM), 3‐(methylacryloylamino)propyl trimethylammonium chloride (MAPTAC), and poly(ethylene glycol)monomethyl methacrylate (PEGMA) is presented. The terpolymers were synthesized using reversible addition‐fragmentation chain transfer (RAFT) polymerization. Compositions of the terpolymers determined using ¹H NMR were in close agreement to the theoretical values determined from the monomer feed ratios. GPC‐MALLS was used to analyze the molecular weight characteristics of the polymers, which were found to have low polydispersities (M_w/M_n 1.1–1.4). The phase transitions were studied as a function of PEGMA and NIPAM content using temperature controlled ¹H NMR and turbidity measurements (UV‐Vis). The relationship between thermal stability and the comonomer ratio of the polymers was measured using thermogravimetric analysis (TGA). Protein interaction studies were performed to determine the suitability of the polymers for biological applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 4021–4029, 2008     

Effect of substrate temperature on the properties of reactively sputtered TiN/NbN multilayers

TiN/NbN multilayer coatings were deposited with various substrate temperatures by DC reactive magnetron sputtering method onto Si (111) and glass substrates. The effect of substrate temperature on the structural and optical properties of TiN/NbN multilayers was investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, Field emission scanning electron microscopy and Photoluminescence measurements. The composition was analyzed by X‐ray photoelectron spectroscopy. X‐ray diffraction results showed that the layers crystallized in cubic structure for TiN and hexagonal structure for NbN. It was found that grain size increased with increase in substrate temperature. The surface morphology of the TiN/NbN thin films showed a dense and smooth surface with substrate temperature upto 200 °C but after 300 °C, the grains became larger and coarse surface was observed. The TiN/NbN multilayer coatings exhibited the characteristic peaks centered at 180, 210 and 560 cm^‐1. Red band emission peaks were observed in the wavelength range of 700‐710 nm. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Effect of embedded lithium nanoclusters on structural, optical and electrical characteristics of MgO thin films

Energetic 1.5 MeV Li⁺ irradiation on MgO thin film surfaces for fluences 10¹³, 10¹⁴ and 10¹⁵ ions/cm² led to radiation damage that altered the grain size from 29 to 9 nm and the internal stress. Optical absorption bands at 5.0, 3.49, 2.16 and 1.27 eV revealed, respectively, the presence of, oxygen vacancies, anion divacancies and trapped-hole centers. DC electrical conductivity of was increased by three orders of magnitude at room temperature as the fluence was increased to 10¹⁵ ions/cm².