A sensitive solid-phase fluoroimmunoassay for detection of opiates in urine

An automated flow fluorometer designed for kinetic binding analysis was adapted to develop a solid-phase competitive fluoroimmunoassay for urinalysis of opiates. The solid phase consisted of polymer beads coated with commercial monoclonal antibodies (MAbs) raised against morphine. Fluorescein-conjugated morphine (FL-MOR) was used as the fluorescein-labeled hapten. The dissociation equilibrium constant (K _D ) for the binding of FL-MOR to the anti-MOR MAb was 0.23 nM. The binding of FL-MOR to the anti-MOR MAb reached steady state within minutes and was displaced effectively by morphine and other opiates. Morphine-3-glucuronide (M3G), the major urinary metabolite of heroin and morphine, competed effectively with FL-MOR in a concentration-dependent manner for binding to the antimorphine MAb and was therefore used to construct the calibration curve. The sensitivity of the assay was 0.2 ng/mL for M3G. The assay was effective at concentrations of M3G from 0.2 to 50 ng/mL, with an IC₅₀ of 2 ng/mL. Other opiates and heroin metabolites that showed >50% crossreactivity when present at 1 μg/mL included codeine, morphine-6-glucuronide, and oxycodone. Methadone showed very low crossreactivity (<5%), which is a benefit for testing in patients being treated for opiate addictions. The high sensitivity of the assay and the relatively high cutoff value for positive opiate tests allows very small sample volumes (e.g., in saliva or sweat) to be analyzed. A double-blind comparison using 205 clinical urine samples showed good agreement between this single-step competitive assay and a commercially performed enzyme multiplied immunoassay technique for the detection of opiates and benzoylecgonine (a metabolite of cocaine).     

Thermal analysis of lanthanide polyphosphates

Summary A study of thermal analysis of some lanthanide polyphosphates has been reported. The DTA curves of Ce, Pr and Sm polyphosphates were of similar nature. They exhibited a sharp exothermic peak indicating crystallization temperature (T _c) around 520 °C. However, no peak indicatingT _m was observed upto 800 °C. TG curves of Ce, La, Pr, Sm, Y polyphosphates indicated weight loss occurring in three stages. The integral procedural decomposition thermal analysis (ipdt) indicated that these materials had refractory nature.With 4 figures and 2 tables     

After-effects of Auger ionization following electron capture in organic 125iodine compounds

The emission Mössbauer spectra of ¹²⁵I labeled iodobenzene, methyl iodide, and of their dilute solutions in benzene and hexane, were computer analyzed. Two species were observed, in one of which tellurium is presumably attached to two organic moieties, while in the other, tellurium is attached to a single organic moiety.     

Interfacial phase transition of an environmentally responsive elastin biopolymer adsorbed on functionalized gold nanoparticles studied by colloidal surface plasmon resonance

The change in optical properties of colloidal gold upon aggregation has been used to develop an experimentally convenient colorimetric method to study the interfacial phase transition of an elastin-like polypeptide (ELP), a thermally responsive biopolymer. Gold nanoparticles, functionalized with a self-assembled monolayer (SAM) of mercaptoundecanoic acid onto which an ELP was adsorbed, exhibit a characteristic red color due to the surface plasmon resonance (SPR) of individual colloids. Raising the solution temperature from 10 degrees C to 40 degrees C thermally triggered the hydrophilic-to-hydrophobic phase transition of the adsorbed ELP resulting in formation of large aggregates due to interparticle hydrophobic interaction. Formation of large aggregates caused a change in color of the colloidal suspension from red to violet due to coupling of surface plasmons in aggregated colloids. The surface phase transition of the ELP was reversible, as seen from the reversible change in color upon cooling the suspension to 10 degrees C. The formation of colloidal aggregates due to the interfacial phase transition of adsorbed ELP was independently verified by dynamic light scattering of ELP-modified gold colloids as a function of temperature. Colloidal SPR provides a simple and convenient colorimetric method to study the influence of the solution environment, interfacial properties, and grafting method on the transition properties of ELPs and other environmentally responsive polymers at the solid-water interface.     

Diaminodithioether complexes of nickel(II) and palladium(II): A unique case of dealkylation of S,S′-thioether

Summary Nickel(II) and palladium(II) complexes of the 1,3-di(o-aminophenylthio) propane (H₂L¹) and 1,2-di(o-aminophenylthio)xylene (H₂L²) ligands have been prepared and characterized. The hydrobromide salt of H₂L¹ gave a 12 ligand-metal complex of Pd^II, whereas free H₂L¹ formed the usual 1:1 species. The reaction of Na₂PdCl₄ with H₂L² resulted in S,S-dealkylation of the ligand and formation of a mononuclear complex of the corresponding thiol, i.e. 2-aminobenzenethiol. NiCl₂, NiBr₂ and Ni(ClO₄)₂ did not react directly with H₂L². Ni^II is a fairly hard ion and therefore does not coordinate to the soft thioether moiety in H₂L² in the absence of soft anions which symbiotically motivate Ni^II to act as a soft acceptor. It thus does not react with H₂L² in the presence of hard ions such as Cl^–, Br^- and ClO ₄ ^– , but, the in situ reaction of the constituents produced the tetrahedral Ni^II complex, contrary to earlier reports of similar types of octahedral species.     

Floating spherical Gaussian orbital model study of average electric polarisabilities and magnetic susceptibilities: Some aliphatic hydrocarbons

Floating spherical Gaussian orbital model is used to discuss the average electric polarisabilities and magnetic susceptibilities of a series of hydrocarbons. It has been noticed that the core contributions are negligibly small and these quantities (average electric polarisabilities and magnetic susceptibilities) can be well estimated from contributions localised on bond Gaussians.     

Macrocyclization of bis-indole quinolines for selective stabilization of G-quadruplex DNA structures

The recognition of G-quadruplex (G4) DNA structures as important regulatory elements in biological mechanisms, and the connection between G4s and the evolvement of different diseases, has sparked interest in developing small organic molecules targeting G4s. However, such compounds often lack drug-like properties and selectivity. Here, we describe the design and synthesis of a novel class of macrocyclic bis-indole quinolines based on their non-macrocyclic lead compounds. The effects of the macrocyclization on the ability to interact with G4 DNA structures were investigated using biophysical assays and molecular dynamic simulations. Overall, this revealed compounds with potent abilities to interact with and stabilize G4 structures and a clear selectivity for both G4 DNA over dsDNA and for parallel/hybrid G4 topologies, which could be attributed to the macrocyclic structure. Moreover, we obtained knowledge about the structure–activity relationship of importance for the macrocyclic design and how structural modifications could be made to construct improved macrocyclic compounds. Thus, the macrocyclization of G4 ligands can serve as a basis for the optimization of research tools to study G4 biology and potential therapeutics targeting G4-related diseases.

Macrocyclization improves the selectivity, affinity, and ability to stabilize G4 DNA structures.     

Synthesis and antispasmodic activity evaluation of bis-(papaverine) analogues

A new series of N-substituted bis-(tetrahydropapaverine) ring systems have been synthesised in expectation of better antispasmodic activity in comparison with papaverine. The synthesis of the targeted heterocycles is described along with a discussion of their structure activity relationship. The general synthetic methods of bis-(tetrahydropapaverine) analogues involve tetrahydropapaverine, various piperazines, diisocyanates and diisothiocyanates as starting materials. Pharmacological evaluation involves the in vitro antispasmodic activity on a freshly removed guinea pig ileum using a force displacement transducer amplifier connected to a physiograph. Among the analogues synthesized in the present study, N,N'-bis-[2-carbamoyl-1-(3,4-dimethoxybenzyl)-6,7-dimethoxy-1,2,3,4-tetrahydroisoquinolinyl]piperazine (22), was found to be the most potent muscle relaxant (IC(50): 0.31 microM).     

A new route to obtain shape-controlled gold nanoparticles from Au(III)-beta-diketonates

Ligands with a beta-diketone skeleton have been employed for the first time as reductant to produce ligand stabilized gold nanoparticles of different shapes from aqueous HAuCl(4) solution. Evolution of stable gold nanoparticles follows first order (k approximately equal to 10(-2) min(-1)) kinetics with respect to Au(0) concentration. Growth of particles of different shapes (spherical or triangular or hexagonal) goes hand in hand under the influence of different beta-diketones, which have excellent capping and reducing properties. Chlorine insertion was observed to take place in the beta-diketone skeleton.     

Role of dimethyl sulfoxide as a solvent for vinyl polymerization

Dimethyl sulfoxide has been used as a solvent in the polymerization of methyl methacrylate and styrene. The chain-transfer coefficients of the solvent and the values of δ [i.e., (2k_t)^1/2/k_p] in solvent-monomer mixtures of various compositions were determined. δ was observed to be dependent on the solvent concentration in the case of methyl methacrylate but remained constant in case of styrene. The lowering of the values of δ with increasing solvent concentration in case of methyl methacrylate has been attributed to an interaction between the solvent and poly(methyl methacrylate) radical resulting in lower termination rate.