Modification of Hole Transport Layers for Fabricating High Performance Non‐fullerene Polymer Solar Cells

Interfacial engineering is expected to be a feasible strategy to improve the charge transport properties of the hole transport layer (HTL), which is of crucial importance to boost the device performance of organic solar cells (OSCs). In this study, two types of alcohol soluble materials, 2,3,5,6‐tetrafluoro‐7,7,8,8‐tetracyanoquinodimethane (F₄‐TCNQ) and di‐tetrabutylammoniumcis–bis(isothiocyanato)bis (2,2’‐bipyridyl‐4,4’‐dicarboxylato) ruthenium(II) (N719) dye were selected as the dopant for HTL. The doping of F₄‐TCNQ and N719 dye in poly (ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) with and without integrating a graphene quantum‐dots (G‐QDs) layer has been explored in poly[[2,6′‐4‐8‐di(5‐ethylhexylthienyl)benzo[1,2‐b:3,3‐b]dithiophene][3‐fluoro‐2[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thio‐phenediyl:(2,2′‐((2Z,2′Z)‐(((4,4,9, 9‐tetrakis(4‐hexylphenyl)‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl)bis(4‐((2‐ethylhexyl)oxy)thiophene‐5,2‐diyl))bis(methanylylidene))bis(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile (PTB7‐Th:IEICO‐4F) OSCs. The power conversion efficiency of the non‐fullerene OSCs has been increased to 10.12% from 8.84%. The influence of HTL modification on the nano‐morphological structures and photophysical properties is analyzed based on the comparative studies performed on the control and modified devices. The use of chemical doping and bilayer strategy optimizes the energy level alignment, nanomorphology, hole mobility, and work‐function of HTL, leading to considerable reduction of the leakage current and recombination losses. Our work demonstrates that the doping of HTL and the incorporation of G‐QDs layer to constitute a bilayer HTL is an promising strategy to fabricate high performance non‐fullerene polymer solar cells     

Resilient and agile engineering solutions to address societal challenges such as coronavirus pandemic

The world is witnessing tumultuous times as major economic powers including the US, UK, Russia, India, and most of Europe continue to be in a state of lockdown. The worst-hit sectors due to this lockdown are sales, production (manufacturing), transport (aerospace and automotive) and tourism. Lockdowns became necessary as a preventive measure to avoid the spread of the contagious and infectious “Coronavirus Disease 2019” (COVID-19). This newly identified disease is caused by a new strain of the virus being referred to as Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS CoV-2; formerly called 2019-nCoV). We review the current medical and manufacturing response to COVID-19, including advances in instrumentation, sensing, use of lasers, fumigation chambers and development of novel tools such as lab-on-the-chip using combinatorial additive and subtractive manufacturing techniques and use of molecular modelling and molecular docking in drug and vaccine discovery. We also offer perspectives on future considerations on climate change, outsourced versus indigenous manufacturing, automation, and antimicrobial resistance. Overall, this paper attempts to identify key areas where manufacturing can be employed to address societal challenges such as COVID-19.     

Role of Impurity Precipitates on Microhardness of KBr:Ba2+ Crystals

Microhardness of KBr crystals doped with various concentration of Ba²⁺ have been investigated in the asgrown state and after quenching from various elevated temperatures. It is observed that hardness increases with increase in impurity concentration and at high concentration the hardness starts decreasing. Microstructural investigations have showed the formation of visible precipitates at high concentrations. The heat treatment studies showed that in crystals quenched from elevated temperatures the visible precipitates dissociate and hardness increases.     

Electrical transport properties of CdTe:Sb films

Hall coefficient and dc conductivity measurements are made on p-type CdTe:Sb films grown by vacuum evaporation technique on glass substrate. The grain boundary potential barrier, which is found mainly to limit the mobility of carriers is calculated as a function of film thickness. The n-type conduction is found to dominate over p-type conduction above about 330 K. The ratio of electron to hole mobility is also calculated.     

Microhardness studies on some compound semiconductors

Vickers microhardness studies on some III–V and II–VI compound semiconductors have been made. The results showed that ZnS has the highest microhardness value. These results are compared with other properties of the crystals such as melting point, ionicity etc. Variation of microhardness with load was also studied on all the crystals. The results indicated that the hardness value increases at low loads. These results have been analysed by using resistance pressure model and interpreted.     

Dielectric and electrical studies on as-grown CeO2 films

Thin film capacitors of CeO₂ were fabricated by thermal evaporation. The dielectric properties of these films were studied in the frequency range 0.05–16 KHz at various temperatures, starting from liquid nitrogen temperature to 390 K. The effect of annealing on capacitance and tan δ were studied for different frequencies. The behaviour was explained on the basis of relief in strain energy. The plot between current density and temperature was drawn, and from the slope of the plot the activation energy was calculated and found to be 0.52 ev. The results were discussed.     

Electrical properties of Al-CeO2-Al thin film capacitor structures

Cerium Oxide films were prepared by vacuum thermal evaporation from tantalum boat in a conventional vacuum coating unit. Current-voltage characteristics were studied for different film thicknesses. The breakdown voltage (V_B) and dielectric field strength (E_B) were calculated. It is found that the breakdown voltage increases and dielectric field strength decreases as the thickness of the film increases. The applicability of Forlani-Minnaja relation is discussed. Current-voltage characteristics were also drawn at different temperatures and breakdown voltages were calculated. The breakdown voltage decreases as the temperature of the structure increases but the variation is nonlinear. The variation of current density with temperature was studied and the activation energy for the migration of charge carriers was calculated and it is about 0.52 ev. The results were discussed.     

Third-order Nonlinear Optical Properties of Octa-substituted Metal-free Phthalocyanine Thin Films

Third-order nonlinear optical susceptibility, χ⁽³⁾ of symmetrically octa-substituted metal-free phthalocyanine thin films measured by the third-harmonic generation technique are reported. The metal-free phthalocyanine has been found to show a χ⁽³⁾ (−3ω; ω,ω, ω) value as large as 7.73×10⁻¹² esu at 1.80 μm. The figure of merit, χ⁽³⁾/α, was estimated to be 4.17×10¹⁷ esu cm at 1.05 μm and 6.97×10¹⁶ esu cm at 1.65 μm. Both linear and third-order optical properties of liquid-crystalline metal-free phthalocyanines are discussed     

Anti-Obesity Potential of Ponciri Fructus: Effects of Extracts,Fractions and Compounds on Adipogenesis in 3T3-L1 Preadipocytes

Background: Ponciri Fructus, a crude drug consisting of the dried immature fruits of Poncirus trifoliata (L.) Raf., is a popular folk medicine used for the treatment of allergy and gastrointestinal disorders in Korea and China. In this study, the anti-adipogenic activity of extracts and isolated compounds were evaluated using 3T3-L1 preadipocytes. Methods: Dried immature fruits were extracted and fractionated into n-hexane, ethyl acetate (EtOAc), n-butanol and water-soluble fractions. The ethanol extract and fractions were tested for anti-adipogenic activity in the 3T3-L1 cell line. The active fractions (n-hexane and EtOAc fractions) were further subjected to chromatographic techniques to isolate and identify active compounds. Furthermore, the isolated compounds were evaluated for their anti-adipogenic activity. Results: Altogether, seven compounds, including two flavonoids, one phytosteroid and four coumarin derivatives, were isolated. Ethanol extract, n-hexane fraction, EtOAc fraction and three isolated compounds (phellopterin, oxypeucedanin and poncirin) showed significant anti-adipogenic activity as observed by reduced lipid deposition in differentiated 3T3-L1 cells. Further, oxypeucedanin downregulated the key adipogenic markers, such as peroxisome proliferator-activated receptors proteins γ (PPAR-γ), sterol response element binding proteins-1 (SREBP-1), CCAAT/enhancer binding proteins-α (C/EBP-α), adipocyte-specific lipid binding proteins (FABP-4), adipocyte fatty acid binding proteins (aP2), lipoprotein lipase (LPL) and leptin. Conclusion: This study indicated that the ethanol extract, hexane fraction and ethyl acetate fraction of P. trifoliata fruits possess strong anti-adipogenic activity, containing the active compounds such as phellopterin, oxypeucedanin and poncirin. Further research is recommended to explore their efficacy and safety in animal and clinical models.     

Thermo emf studies on CdTe:Sb Thin Films

Thermal transport properties have been studied on as-grown and annealed CdTe:Sb thin films of different thicknesses and concentrations of Sb. These films were prepared by sequential vacuum deposition of CdTe and Sb on clean and hot glass substrates held at 210 °C temperature at a constant rate of deposition. From these studies all the films were found to be p-type. It is also observed that the thermoelectric power increases with Sb concentgration, thickness of the film and with annealing process. Fermi-energy variation with temperature have been calculated on the basis of thermo emf data. All these results have been explained on the basis of defects introduced by Sb doping.