Global Behaviour of Solutions of Nonlinear Delay Difference Equations*

In this paper global asymptotic stability and asymptotic behaviour of solutions of nonlinear delay difference equations has been studied and a few sets of sufficient conditions for global asymptotic stability are derived.     

Crystal growth,optical and thermal studies of nonlinear optical γ-glycine single crystal grown from lithium nitrate

Single crystals of the nonlinear material γ-glycine have been grown in the presence of lithium nitrate by slow-evaporation method. Structural characterization of the grown crystals was carried out by powder and single crystal X-ray diffraction (XRD) methods and it is observed that the samples crystallize in hexagonal system with non-centrosymmetric space groups. The modes of vibrations of different molecular groups present in glycine have been identified by spectral analyses. UV–visible transmittance study was performed to analyze optical transparency of γ-glycine crystals and found that the crystal was transparent in the entire visible-NIR region. Second harmonic generation (SHG) conversion efficiency has been estimated as 62 mV and the output power by the crystal was 1.72 times that of potassium dihydrogen phosphate (KDP) crystal. The thermal stability and decomposition of the sample have been studied by thermal analysis and it is observed that the γ-glycine crystal have good thermal stability.     

Growth,electrical and optical behaviour of nanocrystalline Ag2Cu2O3 films produced by RF magnetron sputtering

Thin films of Ag₂Cu₂O₃ were formed on glass substrates by RF magnetron sputtering technique under different oxygen partial pressures in the range 5 × 10^‐3 – 8 × 10^‐2 Pa using mosaic target of Ag₇₀Cu₃₀. The influence of oxygen partial pressure on the core level binding energies, crystallographic structure, and electrical and optical properties of the deposited films was studied. The atomic ratio of copper to silver in the films was 0.302. The oxygen content was in correlation with the oxygen partial pressure maintained during the growth of the films. The films formed at oxygen partial pressures < 2 × 10^‐2 Pa was mixed phase of Ag₂Cu₂O₃ and Ag. The films deposited at 2 × 10^‐2 Pa were single phase of Ag₂Cu₂O₃. The crystallite size of the films formed at 2 × 10^‐2 Pa was 12 nm, while those films annealed at 473 K was 16 nm. The nanocrystalline Ag₂Cu₂O₃ films formed at oxygen partial pressure of 2 × 10^‐2 Pa showed electrical resistivity of 8.2 Ωcm and optical band gap of 1.95 eV. (© 2011 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

A heterometallic, heterovalent Cu(I)/Sn(II/IV)/S cluster with an unprecedented Cu4Sn core and stannacyclopentane units

[(Ph3PCu(I))6{(CH2)4Sn(IV)S2}6Cu(I)4Sn(II)], a walnut-type, heterometallic, heterovalent cluster, as confirmed by density functional theory calculations, was obtained under reductive solvothermal conditions and features an unprecedented metalloid core within a metal sulfide shell and an organic surface.     

Radiolysis of resist polymers. IV. Poly(p-substituted-α-methylstyrene)s

The effect of parasubstituents on the radiation chemistry of poly(α-methylstyrene) (PMS) was compared for the fluoro (PFMS), chloro (PCMS), bromo (PBMS), isopropyl (PiPMS), and methoxy (PMeOM) derivatives. Radiolysis yields, ESR spectra, and GC? MS analysis of products were obtained. PMS and PFMS have similar low radiolysis yields, products, and product distributions. Only main-chain radicals which persist to 200° were observed. PCMS has increased values of G_s, G_x, and G_r. The product analysis results suggest that the presence of chlorine contributes to the primary process by dissociative electron capture and enhances the cleavage of α-methyl group. Irradiation of PBMS caused crosslinking and yielded few volatile products. PMeOMS and PiPMS gel readily by γ-irradiation and may be useful as negative radiation resists.     

Glycidyl methacrylate–tert-butyl acrylate copolymers: Synthesis,characterization, and thermal studies

Glycidyl methacrylate was copolymerized with tert-butyl acrylate in bulk at 60°C using benzoyl peroxide as free radical initiator. The copolymer composition was determined by chemical analysis as well as from ¹³C-NMR data. The monomer reactivity ratios were calculated by using the YBR method. The number average sequence length of the copolymers was determined from ¹³C-NMR data and compared with those obtained from reactivity ratios. The intrinsic viscosity of the copolymers was determined in DMF, and thermal stability as well as mechanism of thermal degradation of the copolymers were evaluated.     

Reduction of amine N-oxides by diboron reagents

Facile reduction of alkylamino-, anilino-, and pyridyl-N-oxides can be achieved via the use of diboron reagents, predominantly bis(pinacolato)- and in some cases bis(catecholato)diboron [(pinB)(2) and (catB)(2), respectively]. Reductions occur upon simply mixing the amine N-oxide and the diboron reagent in a suitable solvent, at a suitable temperature. Extremely fast reductions of alkylamino- and anilino-N-oxides occur, whereas pyridyl-N-oxides undergo slower reduction. The reaction is tolerant of a variety of functionalities such as hydroxyl, thiol, and cyano groups, as well as halogens. Notably, a sensitive nucleoside N-oxide has also been reduced efficiently. The different rates with which alkylamino- and pyridyl-N-oxides are reduced has been used to perform stepwise reduction of the N,N'-dioxide of (S)-(-)-nicotine. Because it was observed that (pinB)(2) was unaffected by the water of hydration in amine oxides, the feasibility of using water as solvent was evaluated. These reactions also proceeded exceptionally well, giving high product yields. In constrast to the reactions with (pinB)(2), triethylborane reduced alkylamino-N-oxides, but pyridine N-oxide did not undergo efficient reduction even at elevated temperature. Finally, the mechanism of the reductive process by (pinB)(2) has been probed by (1)H and (11)B NMR.     

Growth, structural, optical and thermal properties of gamma-glycine crystal

Single crystals of gamma-glycine were grown from a mixture of glycine, water and lithium bromide. Single crystal X-ray diffraction analysis confirmed the growth of gamma-glycine phase. Presence of various functional groups of gamma-glycine was identified by FTIR spectrum. Optical absorbance spectrum recorded in the wavelength range of UV-vis-NIR revealed that this crystal has good optical transparency in the range 250-1500 nm. Vickers microhardness values were estimated on the prominent (100) face. Thermogravimetric and differential scanning calorimetric analyses were carried out to study the thermal properties of gamma-glycine. Second harmonic generation efficiency of the crystal measured by Kurtz's powder method using Nd:YAG laser is about three times that of KDP.     

Spectral studies on Ag8+ ions irradiated LAHCl·H2O and LAHBr·H2O single crystals

L-arginine hydrochloride monohydrate and L-arginine hydrobromide monohydrate single crystals are irradiated by 100 MeV Ag8+ swift heavy ions. The residual gases liberated from the irradiated samples are monitored as a function of ion fluence using quadrupole mass analyzer. The C2H3+, C2H2, N2, CO, HCl and CO2 are the dominant gases liberated. Fourier transform infrared spectra of irradiated crystals explain the breaking of bonds in a localized region of the crystals. The crystallinity of irradiated crystals is analyzed by powder X-ray diffractions.     

The sugar conformation governs (6-4) photoproduct formation at the dinucleotide level

The LNA dinucleotide mimic of TpT whose two-sugar puckers are locked in the C3'-endo conformation selectively produces the corresponding cyclobutane pyrimidine dimer under 254 nm irradiation. In the natural series (TpT) the sugar puckers are in a major C2'-endo sugar conformation and the (6-4) photoproduct is also produced. Consequently, this study demonstrates that the C2'-endo conformation of the sugar pucker is necessary for (6-4) photoproduct formation.