Photocatalytic Reduction of NO with C2H6 on a Hollandite-Type Catalyst

The photocatalytic reduction of nitrogen monoxide (NO) with ethane on the hollandite type catalyst (K₂Ga₂Sn₆O₁₆KGSO) was investigated. Using a closed-gas circulating system equipped with a Q-MASS detector and in-situ diffuse reflectance FT-IR spectroscopy. The reactant gases of NO and ¹³C₂H₆ decreased with the increasing irradiation time. In contrast, the N₂ yield increased proportionally to the conversion of ¹³C₂H₆. Nitrogen oxides such as N₂O did not reach their detectable levels. The NO adsorbed on KGSO was found to change to its activated species by UV irradiation. The oxidized products of C₂H₆ such as CH₃CHO increased in proportion to the reaction time. The present results strongly suggest that KGSO has remarkable photocatalytic activity for the reduction of NO with C₂H₆.     

Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

X-ray scattering by water molecules studied by using synchrotron radiation

The energy spectra of free water molecules were measured at scattering angles 2θ ranging from 10.5° to 75.7°, using an angle-dispersive-type diffractometer and synchrotron radiation as an X-ray source. A silicon (111) monochrometer was used to obtain incident X-rays with the wavelengths of (1.543/n) Å (n = 1,3,4,5). Observed inelastic scattering peaks are clearly separated from eleastic ones at s values [s = (4π/λ) sin Å] larger than 8 Å^?1. The increase of the separation with an increasing s value was consistent with the classical theory of the Compton shift. The total (elastic plus inelastic) intensities were obtained over a range of s = 0.74–5.0 Å^?1. Experimental difference intensities Δσ_ee and Δσ_ne were obtained separately by combining the X-ray and high-energy electron scattering data. The experimental results are in reasonable agreement with the theoretical intensities calculated from SCF and CI molecular wave functions with a basis set of double-zeta plus polarization functions. © 1994 John Wiley & Sons, Inc.     

Synthesis of N3-substituted uridine and related pyrimidine nucleosides and their antinociceptive effects in mice

Seventy eight N(3)-substituted derivatives of uridine (1), thymidine (2), 2'-deoxyuridine (3), 6-azauridine (4), 2',3'-O-isopropylideneuridine (5), and arabinofuranosyluracil (6) were synthesized and their antinociceptive effects were evaluated. N(3)-(2',4'-Dimethoxyphenacyl)uridine (1l), N(3)-(2',4'-dimethoxyphenacyl)2'-deoxyuridine (3l), and N(3)-(2',5'-dimethoxyphenacyl)arabinofuranosyluracil (6m) possessed 93, 86, and 82% of the antinociceptive effects tested by hot plate, respectively. The antinociceptive effects of three derivatives were 5.8, 5.4, and 5.1-folds of the effect of N(3)-phenacyluridine (1h) (16%), respectively. The structure-activity relationship of N(3)-substituted pyrimidine nucleosides was also discussed.     

Ozonolysis of five-membered heterocycles

The relative reaction rate of five-membered heterocycles with ozone was evaluated. These relative rates were correlated to the highest bond order value in the corresponding ring, calculated by the convenient HMO method. From this correlation, the reactivity of heterocycles with ozone was able to be predicted. Also it was concluded that the predominant product in the ozonolysis of five-membered heterocycles containing an oxygen atom was the corresponding carboxylic acid, while nitrogen heterocycles gave the corresponding amide.     

Theoretical studies on the alkaline hydrolysis of N-Methylcarbamates

The reaction mechanisms of the alkaline hydrolysis of N-methylcarbamates were studied using the AM1 method by assuming two possible pathways: (1) nucleophilic attack of hydroxide ion on the carbonyl carbon to give a tetrahedral complex followed by its breakdown to carbamic acid (B_AC2); and (2) proton abstraction by hydroxide ion at the nitrogen atom followed by elimination of the alkoxide ion to form N-methyl isocyanate (E1cB). Reaction coordinate analysis showed that the reaction mechanism is determined by both the stability of an intermediate and the energy barrier for elimination.     

Liquid-Crystalline copolymers and polymer blends containing electron donor and acceptor groups: Effects of mesogenic structures on the smectic phase and the miscibility

Side-chain liquid-crystalline copolymers and polymer blends containing an electron-donating (carbazolylmethylene)aniline group and electron-accepting nitrophenyl groups with various central linking groups between aromatic groups in the mesogenic units, i.e., N?CH, CH?CH, N?N, and COO, were prepared to examine effects of the mesogenic structure on thermal behaviours. The most remarkable effects of the central linking group on the thermal properties and the miscibility were observed for the polymer blends. The 1:1 miscible polymer blends were prepared from the electron-donating polymer containing (carbazolylmethylene)aniline group (PM6C_z) and the electron-accepting polymers with similar central linking groups, i.e., N?CH, CH?CH, and N?N. For example, the 1: 1 polymer blend of PM6C_z and the electron-accepting polymer containing the nitrostilbene group induced a smectic phase from 73 to 207°C. This isotropic temperature was 46°C higher than the calculated value (161°C) based on the composition without the electron donor-acceptor interaction. On the other hand, the 1: 1 polymer blend of PM6C_z and the electron-accepting polymer containing the nitrophenylbenzoate group showed phase separation. Thus, the remarkable thermal stability and the miscibility of the polymer blends containing the electron donor and acceptor groups might be caused by planar structures between the mesogenic side groups which have similar central linking groups through the electron donor-acceptor interaction. A similar tendency was seen for copolymers and binary mixtures of both low-molecular-weight compounds containing the same mesogenic groups. © 1995 John Wiley & Sons, Inc.     

Magnetic microcapsules for targeted delivery of anticancer drugs

To achieve targeted distribution of anticancer drugs with sustained activity, ferromagnetic ethylcellulose microcapsules containing an anticancer drug, mitomycin C (FM-MMC-mc), were prepared by a method based on phase separation principles. Two prototypes of FM-MMC-mc were made: one with the drug as the core and zinc ferrite on its capsular surface (outer type); the other with both the drug and zinc ferrite as the core (inner type). Both preparations provided a sustained-release property and a sensitive response to conventional magnetic force, although certain differences in the release rate of drug, magnetic responsiveness, and particle size were found between the two dosage forms. Animal studies showed that the magnetic microcapsules could be magnetically controlled in the artery and urinary bladder. VX2 tumors in the rabbit hind limb and urinary bladder were successfully treated with magnetic control of FM-MMC-mc. Pharmacokinetic study revealed that the targeting of the microcapsules markedly enhanced the drug absorption into the surrounding tissues for a prolonged period of time. The results indicate the feasibility and effectiveness of the magnetic microcapsules as a targeted drug delivery system.     

Ab initio study of small acetonitrile cluster anions

Ab initio electronic structure calculations have been performed for (CH(3)CN)(2) (-) and (CH(3)CN)(3) (-) cluster anions using a diffuse basis set. We found both the dipole-bound structures and internal structures, where in the former structure an excess electron is mainly distributed on the surface of the cluster while an excess electron is internally trapped in the latter configuration. The optimized structures found for cluster anions were compared to those for neutral clusters. Potential-energy surfaces were also plotted as a function of appropriate internal coordinates in order to understand the interconversions of the optimized structures of clusters. The relative stabilities of the optimized confirmers have been discussed on the basis of the characteristics of these potential surfaces, relative energies, and electron vertical detachment energies.     

Radical-initiated homo- and copolymerization of cyanomethyl methacrylate

The kinetics of cyanomethyl methacrylate (CyMA) homopolymerization was investigated in acetonitrile with azobisisobutyronitrile as initiator. The rate of polymerization R_p was expressed by R_p = k[AIBN]^0.49[CyMA]^1.2 and the overall activation energy was calculated as 72.3 kJ/mol. Kinetic constants for CyMA polymerization were obtained as follows: k_p/k = 0.10 L^1/2s^?1/2; 2fk_d = 1.57 × 10^?5s^?. The relative reactivity ratios of CyMA(M₂) copolymerization with styrene (r₁ = 0.15, r₂ = 0.29) and methyl methacrylate (r₁ = 0.43, r₂ = 0.75) in acetonitrile were obtained. Applying the Q-e scheme (in styrene copolymerization) led to Q = 1.64 and e = 0.98. The glass transition temperature T_g of poly(CyMA) was observed to be 91°C by thermomechanical analysis. Thermogravimetry of poly(CyMA) showed a 10% weight loss at 265°C in air.