Hexakis(2-pyridyl)- and hexakis(3-pyridyl)[3]radialene: novel,water-soluble [3]radialenes with potential utility for supramolecular chemistry

The titled [3]radialenes are the first, water-soluble hexaaryl[3]radialenes with considerably high electron affinity, their alkali metal reduction giving rise to anion-radicals and dianions stepwise as fairly stable species in degassed tetrahydrofuran.     

Separation and determination of some stereoisomers by capillary gel electrophoresis with cyclodextrin incorporated in polyacrylamide gel

Capillary gel electrophoresis (CGE) was successfully applied to the separation of optically active isomers and position isomers by incorporating a suitable cyclodextrin chiral selector in polyacrylamide gel. A commercially available ß-cyclodextrin (ß-CD) was used for enantioselectivity towards o-, m- and p-nitrobenzoic acid, o-, m- and p-hydroxybenzoic acid, o-, m- and p-toluic acid and the optical isomers of dansyl-D,L-leucine and R,S-1,1-binaphthyl-2,2-dihydrogenphosphate. Especially the effect of organic solvents, such as acetonitrile, methanol, dimethylsulphoxide and others were examined in detail. The resolution varied to some extent with the addition of the organic solvent to the polyacrylamide gel and the running buffer solution. The possible mechanism has also been discussed. In addition, quantitative aspects of the separation of stereoisomers using CGE have been studied, showing that both the resolution and accuracy of the determinations were affected by the ratio of the enantiomers.     

Polytheonamides A and B, highly cytotoxic, linear polypeptides with unprecedented structural features, from the marine sponge, Theonella swinhoei

Polytheonamides A and B are highly cytotoxic polypeptides with 48 amino acid residues isolated from the marine sponge, Theonella swinhoei. The structure of polytheonamide B was determined by spectral and chemical methods, especially extensive 2D NMR experiments, which resulted in the unprecedented polypeptide structure; the N-terminal glycine blocked with a 5,5-dimethyl-2-oxo-hexanoyl group, the presence of eight tert-leucine, three beta-hydroxyvaline, six gamma-N-methylasparagine, two gamma-N-methyl-beta-hydroxyasparagine, and beta,beta-dimethymethionine sulfoxide residues. More significantly, it has the sequence of alternating D- and L-amino acids. Polytheonamide A is an epimer of polytheonamide B differing only in the stereochemistry of the sulfoxide of the 44(th) residue.     

Aggregated structure analysis of polymer-protected platinum/ruthenium colloidal dispersions using EXAFS, HRTEM, and electron diffraction measurements

Polymer-protected platinum/ruthenium colloidal dispersions were prepared by refluxing mixed solutions of hexachloroplatinic(IV) acid and ruthenium(III) chloride in a mixture of ethanol/water (1/1 v/v) in the presence of poly(N-vinyl-2-pyrrolidone). The electronic spectra and transmission electron micrographs suggested that the colloidal dispersions are almost composed of the mixture of the small monometallic Pt and Ru clusters over all the ratio of Pt/Ru compositions. Extended X-ray absorption fine structure analyses and high resolution electron microprobe analyses indicated that no Pt/Ru alloy clusters exist in the dispersions, and the aggregation occurs between small monometallic Pt clusters (diameter ca. 15 A) and partially oxidized Ru microclusters (diameter less than 10 A). Electron diffraction measurements also suggested that the diffraction pattern of aggregated Pt/Ru cluster particles prepared by the simultaneous reduction of Pt and Ru ions is the same as that of the physical mixture of the small monometallic Pt and Ru clusters separately prepared. Therefore, it can be concluded that the aggregated Pt/Ru cluster particles, with 10 to 60 A in diameter, are built up by small monometallic Pt clusters and partially oxidized Ru microclusters, and that Pt/Ru alloy clusters are not formed.     

On the selection of the optimal plasticizer for calix[n]arene-based ion-selective electrodes: Possible correlation between the ion selectivity and the ‘softness’ of the plasticizer

A criterion for the selection of a suitable plasticizer for calix[n]arene-based ion-selective electrodes is discussed. The cation selectivity of plasticized membranes without the ligand was first measured as a reference. The membranes can be roughly classified into two groups. The first group shows cation selectivity in the order Cs⁺+>K⁺>Na⁺>Li⁺. The membranes in the second group are made of phosphorus plasticizers, which show a selectivity in the reverse order. The plasticizers in the first group featured a linear relationship between the dipole moment of the plasticizer (calculated by a PM3 method) and the ratio of cesium selectivity to lithium selectivity. The linear relationship supports the view that the polar membrane which includes a soft plasticizer with a large dipole moment shows selectivity for Cs⁺, whereas the nonpolar membrane including the soft plasticizer with the small dipole moment shows much lower selectivity for Cs⁺. Next, 2-fluorphenyl-2-nitrophenyl ether (FPNPE) which showed the highest Cs⁺ selectivity and tris(2-ethylhexyl)phosphate (TEHP) which showed the highest Li⁺ selectivity were mixed in an appropriate ratio to make membranes with a different affinity for hard ions. The metal selectivities of several crown-based and calixarene-based ionophores were examined in these membranes. Although a few exceptions exist, the polar soft membrane is favorable when the interfering metal ion is hard, whereas the hard membrane is favorable when the interfering metal ion is soft.     

Improvement of chemical analysis of antibiotics. X. Determination of eight tetracyclines using thin-layer and high-performance liquid chromatography

Analytical methods for eight tetracyclines (TCs) were established using silica gel high-performance thin-layer chromatography (HPTLC), reversed-phase thin-layer chromatography (RP-TLC) and high-performance liquid chromatography (HPLC). Good separations of eight TCs were obtained using chloroform-methanol-5% disodium ethylenediaminetetraacetate solution (65:20:5) (lower layer) and methanol acetonitrile 0.5 M oxalic acid solution (1:1:4) (pH 3.0) on silica gel HPTLC and C8 TLC plates, respectively. A combination of HPTLC and RP-TLC made possible the identification of the eight TCs. Each calibration graph was linear between 0.1 and 1.0 microgram using UV densitometry except for rolitetracycline. For detection reagents, the diazonium salts including Fast Violet B gave variously coloured spots with the eight TCs and good sensitivities were obtained except with minocycline. In HPLC, the simultaneous analysis of the eight TCs on a C8 column was possible using methanol-acetonitrile-0.01 M oxalic acid solution (1:1.5:7) adjusted to pH 3.0 as the mobile phase. A linear relationship was obtained between 1.0 and 10 ng using the usual sample preparation except for rolitetracycline. The direct determination of rolitetracycline was possible using tetrahydrofuran, dimethyl sulphoxide and the mobile phase as solvents for preparation of the sample. For the determination of residual rolitetracycline, it was effective to measure the amount of rolitetracycline as tetracycline by HPLC, HPTLC and RP-TLC after conversion of rolitetracycline to tetracycline by incubating for 5 min in methanol at 50 degrees C.     

Formation of Supramolecular Polymers Constructed by Cyclodextrins with Cinnamamide

-Cyclodextrin having cinnamamide at 6- or 3-positions (6-CiNH--CD, 3-CiNH--CD) and -cyclodextrin with cinnamamide on 6-position (6-CiNH--CD) have been prepared. Supramolecular structures were formed in the solid state or aqueous solutions and characterized by measurements of NMR and vapor pressure osmometry (VPO). The results indicate that 6-CiNH--CD formed insoluble supramolecular polymers in the solid state, while 6-CiNH--CD and 3-CiNH--CD formed supramolecular complexes in aqueous solutions. 6-CiNH--CD was found to form a dimer in an aqueous solution. 3-CiNH--CD formed intermolecular complexes to give supramolecular polymers. The differences of the position of guest part on cyclodextrins caused to give a variety of supramolecular structures in aqueous solutions.     

Dimethylsilyl ketene acetal as a nucleophile in asymmetric Michael reaction: enhanced enantioselectivity in oxazaborolidinone-catalyzed reaction

[reaction: see text] Dimethylsilanyl [Me2Si(H)] ketene S,O-acetal 6b is an effective nucleophile that retards the undesirable Si+-catalyzed racemic pathway in the oxazaborolidinone-catalyzed asymmetric Michael reaction. Through the further suppression of the Si+-catalyzed pathway by carrying out the reaction in the presence of 2,6-diisopropylphenol and t-BuOMe as additives, enantioselectivity up to 98% ee could be achieved for a variety of acyclic enones.     

The crystal structures of α- and β-CdUO4

The structural parameters of α- and β-CdUO₄ crystals are determined by X-ray powder diffraction technique. α-CdUO₄ is rhombohedral and cell parameters are a = 6.233(3) Å and α = 36.12(5)°. β-CdUO₄ crystallizes in a C-centered orthorhombic cell with a = 7.023(4), b = 6.849(3), c = 3.514 (2) Å. The space groups are $\text{R}\text{3}\text{m}$ for α-CdUO₄ and Cmmm for β-CdUO₄. α-CdUO₄: 1U in (000), 1Cd in ($\text{1}\text{2}\text{1}\text{2}\text{1}\text{2}$), 2O(1) in ±(uuu), 2O(2) in ±(vvv); u = 0.113, v = 0.350, Z = 1. β-CdUO₄: 2U in ($\text{000;}\text{1}\text{2}\text{1}\text{2}\text{0}$), 2Cd in ($\text{1}\text{2}\text{0}\text{1}\text{2}\text{; 0}\text{1}\text{2}\text{,}\text{1}\text{2}$), 4O(1) in ($\text{0, ±y, 0;}\text{1}\text{2}\text{,}\text{1}\text{2}\text{±y, 0}$), 4O(2) in ($\text{±x, 0,}\text{1}\text{2}\text{;}\text{1}\text{2}\text{±x,}\text{1}\text{2}\text{,}\text{1}\text{2}$); x = 0.159, y = 0.278, Z = 2. β-CdUO₄ contains collinear uranyl UO²⁺₂ groups with a UO(1) distance of 1.91 Å, located either along or parallel to the c axis whereas the UO(1) bond length in α-CdUO₄ is 1.98 Å which is longer than the usual uranyl bond length.