Ag/CNT‐catalyzed hydroamination of activated alkynes with aromatic amines

As a nanoparticle support material, carbon nanotubes (CNTs) provide a certain potential activation of catalysis in heterogeneous catalytic organic reactions. Herein, an efficient Ag/CNT‐catalyzed synthesis of enamines via hydroamination of activated alkynes with aromatic amines has been described. This catalyst still retains catalytic activity after being recycled and reused three times. In addition, it represents a green and environmentally friendly process for preparation of enamines. Copyright © 2013 John Wiley & Sons, Ltd.     

镝掺杂LaPO4拉曼光谱变化规律的探讨

采用水热法和后续热处理合成出单斜相LaPO4以及LaPO4:Dy3+,通过XRD对样品进行物相分析,结果表明:所得样品为LaPO4,且XRD图谱及拉曼光谱中峰位的偏移表明Dy的存在,即Dy被掺杂到LaPO4基质中。通过研究用Dy对LaPO4进行不同量掺杂后其拉曼光谱的变化规律,进而找出用Dy对LaPO4进行不同量掺杂后其内部结构的变化规律。结果显示,用Dy对LaPO4进行不同量掺杂后,随着掺杂比例的增大,晶格畸变程度先上升后下降,且在镧镝物质的量比例为1∶0.06时对基体晶格结构影响最大。     

Approach for the Direct Synthesis of β-Dichlorosubstituted Acetanilides Using Iodine Trichloride (ICl3) as the Oxidant and Catalyst

A reliable method for direct synthesis of β‐dichlorosubstituted acetanilides is reported. The key transformation involves the oxidative and catalytic cleavage of a carbon‐carbon bond in the presence of iodine trichloride (ICl₃). In this protocol ICl₃ is used not only as the catalyst but also as the oxidant which widely broadens the scope of its application in organic synthetic chemistry.     

A 4-aminonaphthalimide based environmentally sensitive fluorescence probe

A simply synthesized 4-aminonaphthalimide derivative 1 expresses both polarity and viscosity sensitive fluorescence spectra, indicating its potential usage as an environmentally sensitive fluorescence probe. By comparing the fluorescence behavior of 1 with that of a known 4-aminonaphthalimide derivative 2, it was found that the substitution of the 4-amino group has profound influence on the environmentally sensitive fluorescence properties of 4-aminonaphthalimide.     

Supramolecular nanostructures from self‐assembly of T‐shaped rod building block oligomers

T‐shaped coil–rod–coil oligomers, consisting of a dibenzo[a,c]phenazine unit and phenyl groups linked together with acetylenyl bonds at the 2,7‐position of dibenzo[a,c]phenazine as a rigid segment have been synthesized. The coil segments of these new molecules composed of poly(ethylene oxide) (PEO)–poly(propylene oxide) (PPO) incorporating lateral methyl groups between the rod and coil segment and two flexible alkyl groups connecting with the rigid segment at the 4,6‐position of dibenzo[a,c]phenazine, respectively. The experimental results reveal that the length of the flexible PEO coil chain influence construction of various supra‐nanostructures from lamellar structure to rectangular columnar structure. It is also shown that introduction of different length of alkyl side chain groups in the backbone of the T‐shaped molecules affect the self‐organization behavior to form hexagonal perforate layer or oblique columnar structures. In addition, lateral methyl groups attached to the surface of rod and coil segments, dramatically influence the self‐assembling behavior in the crystalline phase. T‐shaped molecules containing a lateral methyl group at the surface of rod and PEO coil segments, self‐assemble into 3D body‐centered tetragonal structures in the crystalline phase, while molecules without a lateral methyl group based on PEO coil chain self‐organize into 2D oblique columnar crystalline structures. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 5021–5028     

Structural characterization and biological activity of galactoglucan from Castanea mollissima Blume

Abstract

A galactoglucan (HCPA) was extracted from C. mollissima Blume fruits using hot water, which was composed of glucose and galactose, with a molecular weight of 5.5?kDa. Methylation and 1?D, 2?D NMR spectroscopy analysis showed that HCPA contained [→4)-α-D-Glcp(1→], [→4,6)-α-D-Glcp(1→], [→4)-β-D-Galp(1→] and [α-D-Glcp(1→] motifs in a molar ratio of approximately 6.11:1.08:1.00:1.03. HCPA showed a spherical-like structure as detected by scanning electron microscope (SEM). HCPA biological activity was investigated in vitro. The results showed that HCPA inhibited the proliferation of HeLa, MCF-7 and MGC-803 cells, induced HeLa cells apoptosis and arrested cell cycle in G2/M phase of HeLa cells. HCPA also enhanced the viability and phagocytic ability of RAW 264.7 cells and stimulated the production of NO, TNF-α and IL-6. The results demonstrated that HCPA had a potent antitumor and immunomodulating effects in vitro, suggesting its potential use as functional food and drug products.     

制备工艺对p型碲化铋基合金热电性能的影响

利用区熔法、机械合金化、放电等离子烧结(SPS)技术、热压法等多种工艺制备了p型碲化铋基热电材料.在300—500K的温度范围内测量了各热电性能参数，包括电导率(σ)、塞贝克系数(α)和热导率(κ)，研究了制备工艺对热电性能的影响.结果表明，所制备的块体材料与同组成区熔晶体相比，性能优值ZT均有不同程度的提高.其中，利用区熔法结合SPS技术可获得热电性能最佳的块体材料，其ZT值达1.15. 关键词： 碲化铋 放电等离子烧结 区熔法 热电性能     

基于双尺度渐近分析的有限元算法

1．引言正如文山所说，由于复合材料和周期结构的材料系数ail（x）在局部区域内间断且跳跃性很大，加上区域内含有周期性洞穴或裂缝，且周期长度很小．一般而言，直接采用有限元方法进行数值模拟，其计算量大得惊人，甚至难以实现．文山针对这种特征，提出了一种可计算的双尺度渐近分析模式，本文在此基础上给出了相应的有限元算法，它包括：1．周期解在一个基本构造上的有限元计算；2．边界层的有限元计算．同时，给出了相应的误差分析．2．周期解的有限元计算首先考虑下列形式的边值问题；其中把，代E尸（on叫，iii（0关于E—（EI，ZZ…     

甲胺分子的紫外光解离动力学实验研究

在280—287.5 nm区域内,通过实验测定共振增强多光子电离-时间飞行质谱、碎片离子的分质量激发谱以及光强指数等对甲胺分子的光解离通道进行了研究.实验结果证实甲胺分子在单光子能量范围内存在一个电子排斥态,主要的光解离过程为甲胺分子共振吸收1个光子到达该电子排斥态后解离成中性碎片,然后是中性碎片经多光子共振电离形成碎片离子和碎片离子的进一步解离.     

多孔介质BISQ模型中的慢纵波

着重研究了多孔介质BISQ模型中慢纵波的基本特性.给出了BISQ模型下慢纵波速度 和衰减的低频近似公式.与Biot理论对比，BISQ模型中慢纵波的衰减随频率降低急剧增大， 且随喷射流长度的减小而增加；相速度随喷射流长度的减小而增加，其低频极限值不是零； 孔隙流体位移与固相骨架位移之比的幅值随喷射流长度的增加而减小，其相位特点与Biot模 型预测的不同；在流体与孔隙介质的边界上可产生更大的渗流.为对比，同时也给出快纵波 的行为.依据BISQ模型可推断：非黏滞流体饱和孔隙介质中不存在喷射流机理；BISQ模型中 关键词： 多孔介质 喷射流 慢纵波 动力协调