In situ Carbon Modification of g-C3N4 from Urea co-Crystal with Enhanced Photocatalytic Activity Towards Degradation of Organic Dyes Under Visible Light

An in situ strategy was introduced for synthesizing carbon modified graphitic carbon nitride(g-C₃N₄) by using urea/4-aminobenzoic acid(PABA) co-crystal(PABA@Urea) as precursor materials. Via co-calcination of the PABA co-former and the urea in PABA@Urea co-crystals, C guest species were generated and compounded into g-C₃N₄ matrix in situ by replacing the lattice N of the carbon nitride and forming carbon dots onto its layer surface. The carbon modification dramatically enhanced visible-light harvesting and charge carrier separation. Therefore, visible light photo-catalytic oxidation of methylene blue(MB) pollution in water over the carbon modified g-C₃N₄(C/g-C₃N₄) was notably improved. Up to 99% of methylene blue(MB) was eliminated within 60 min by the optimal sample prepared from the PABA@Urea co-crystal with a PABA content of 0.1%(mass ratio), faster than the degradation rate over bare g-C₃N₄. The present study demonstrates a new way to boost up the photocatalysis performance of g-C₃N₄, which holds great potential concerning the degradation of organic dyes from water.     

Morphology and mechanical behavior of isotactic polypropylene with different stereo‐defect distribution in injection molding

Large amount of work has been published on the isotacticity–properties relationship of isotactic polypropylene (iPP). However, the stereo‐defect distribution dependence of morphology and mechanical properties of iPP injection molding samples is still not clear. In this study, two different isotactic polypropylene (iPP) resins (PP‐A and PP‐B) with similar average isotacticity but different stereo‐defect distribution were selected to investigate the morphology evolution and mechanical properties (tensile and notching) of their injection molding samples using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), 2D wide angle X‐ray diffraction (2D‐WAXD), and scanning electron microscope (SEM). The results of DMA showed that the molecular movement ability of PP‐A (with less uniform distribution of stereo‐defect) was stronger than that of PP‐B, meanwhile the analysis of DSC and SEM suggested that after injection molding, smaller spherullites, and crystals with higher perfection had formed in the specimens of PP‐A. The resulting of tensile properties of PP‐A were found to be better than that of PP‐B. The results of morphology evolution by SEM observation and 2D‐WAXD showed that PP‐A is more likely to occur interspherulite deformation and can disperse the tensile stress more efficiently, and therefore, its crystal structure can withstand a greater force when tensile stress is applied. On the other hand, PP‐B has larger spherulites and boundaries, and low perfection of lamellaes, and the intraspherulte deformation tend to take place. It is easier for the crystal of PP‐B to be broken up and reoriented along the tensile direction. Copyright © 2014 John Wiley & Sons, Ltd.     

硫氰酸甲基三烷基季铵盐萃取Co（Ⅱ）的动力学

有关Co(Ⅱ)、Ni(Ⅱ)萃取分离的研究一直受到人们的重视。Preston报导了硫氰酸季铵盐(Q~ SCN-)萃取Co(Ⅱ)、Ni(Ⅱ)的平衡研究,认为Co(Ⅱ)的萃合物组成为Q_2Co(SCN)_4.本文用上升液滴法技术考察了Co(Ⅱ)/0.10mol·L~(-1)SO_4~(2-)/QSCN-煤油体系在298±1K条件下萃取速率R与CoSO_4、SO_4~(2-)和QSCN浓度的关系,确定了正向初始萃取速率方程,拟定了速控步骤。     

利用傅立叶变换红外光谱法检测一氧化氮纯气中的氧化亚氮杂质

利用傅立叶变换红外光谱法对一氧化氮纯气中的氧化亚氮进行了定性和定量分析。实验结果显示,在恒定条件下进样,分辨率为0.5cm^-1,扫描512次,选择2270～2130cm^-1范围内的特征吸收进行定量分析时可以得到良好的分析结果。利用双点法对氧化亚氮杂质进行定量计算;并对分析结果进行了严格的不确定度评定,为一氧化氮纯气中氧化亚氮的检测提供了一个全新的方法。     

Preparation of bovine hemoglobin-imprinted polymer beads via the photografting surface-modified method

Molecularly imprinted polymers (MIPs), based on photografting surface-modified polystyrene beads as matrices, were prepared with acrylamide as the functional monomer, bovine hemoglobin as the template molecule and N, N′-methylene bisacrylamide as the crosslinker in a phosphate buffer. The results of IR, scanning electron microscope (SEM) and elemental analyses demonstrated the formation of a grafting polymer layer on the polystyrene-bead surface. Subsequent removal of the template left behind cavities on the surface of the polymer matrix with a shape and an arrangement of functional groups having complementary binding sites with the original template molecule. The adsorption studies showed that the imprinted polymers have a good adsorption capacity and specific recognition for bovine hemoglobin as the template molecule. Our results demonstrated that the polymer prepared via the photografting surface-modified method exhibited better selectivity for the template. Attempts to employ the new method in molecular imprinting techniques may introduce new applications for MIPs and facilitate probable protein separation and purification. __________ Translated from Chemical Journal of Chinese Universities, 2008, 29(1): 64–70     

Folding kinetics of a naturally occurring helical peptide: implication of the folding speed limit of helical proteins

The folding mechanism and dynamics of a helical protein may strongly depend on how quickly its constituent alpha-helices can fold independently. Thus, our understanding of the protein folding problem may be greatly enhanced by a systematic survey of the folding rates of individual alpha-helical segments derived from their parent proteins. As a first step, we have studied the relaxation kinetics of the central helix (L9:41-74) of the ribosomal protein L9 from the bacterium Bacillus stearothermophilus , in response to a temperature-jump ( T-jump) using infrared spectroscopy. L9:41-74 has been shown to exhibit unusually high helicity in aqueous solution due to a series of side chain-side chain interactions, most of which are electrostatic in nature, while still remaining monomeric over a wide concentration range. Thus, this peptide represents an excellent model system not only for examining how the folding rate of naturally occurring helices differs from that of the widely studied alanine-based peptides, but also for estimating the folding speed limit of (small) helical proteins. Our results show that the T-jump induced relaxation rate of L9:41-74 is significantly slower than that of alanine-based peptides. For example, at 11 degrees C its relaxation time constant is about 2 micros, roughly seven times slower than that of SPE(5), an alanine-rich peptide of similar chain length. In addition, our results show that the folding rate of a truncated version of L9:41-74 is even slower. Taken together, these results suggest that individual alpha-helical segments in proteins may fold on a time scale that is significantly slower than the folding time of alanine-based peptides. Furthermore, we argue that the relaxation rate of L9:41-74 measured between 8 and 45 degrees C provides a realistic estimate of the ultimate folding rate of (small) helical proteins over this temperature range.     

A 2D Lanthanide-organic Framework Based on Inorganic Lanthanum（Ⅲ） Sulfate Skeletons：Synthesis,Structure,and Luminescence and Thermal Properties

A new lanthanum coordination polymer formulated as {[La2(pyda) 2(μ4-SO4) ·5H2O]· 2H2O}n(1,H2pyda = 2,6-pyridine-dicarboxylic acid) has been synthesized from the reaction of H2pyda with lanthanide nitrate in the presence of sulfate as a counter anion. The compound was characterized by elemental analysis,IR spectroscopy and X-ray single-crystal diffraction. It crystallizes in the orthorhombic system,space group Pna21,with a = 18.8558(19) ,b = 6.5831(7) and c = 18.7543(19) . The compound is a 2D hybrid,in which the La(Ⅲ) ions were doubly connected by the carboxylic group of pyda2-ligand to form the La(Ⅲ) dimer followed by being grafted into 1D zig-zag chains which are further connected into a 2D network containing {[La(SO4) ]+}n helical chains. The interchain hydrogen bonding and π-π stacking interactions extended the 2D networks into a 3D supramolecular edifice.     

Uniform AMoO4:Ln (A=Sr, Ba; Ln=Eu, Tb) submicron particles: Solvothermal synthesis and luminescent properties

Rare-earth ions (Eu³⁺, Tb³⁺) doped AMoO₄ (A=Sr, Ba) particles with uniform morphologies were successfully prepared through a facile solvothermal process using ethylene glycol (EG) as protecting agent. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS), Fourier transform infrared spectroscopy (FT-IR), photoluminescence (PL) spectra and the kinetic decays were performed to characterize these samples. The XRD results reveal that all the doped samples are of high purity and crystallinity and assigned to the tetragonal scheelite-type structure of the AMoO₄ phase. It has been shown that the as-synthesized SrMoO₄:Ln and BaMoO₄:Ln samples show respective uniform peanut-like and oval morphologies with narrow size distribution. The possible growth process of the AMoO₄:Ln has been investigated in detail. The EG/H₂O volume ratio, reaction temperature and time have obvious effect on the morphologies and sizes of the as-synthesized products. Upon excitation by ultraviolet radiation, the AMoO₄:Eu³⁺ phosphors show the characteristic ⁵D₀–⁷F_1–4 emission lines of Eu³⁺, while the AMoO₄:Tb³⁺ phosphors exhibit the characteristic ⁵D₄–⁷F_3–6 emission lines of Tb³⁺. These phosphors exhibit potential applications in the fields of fluorescent lamps and light emitting diodes (LEDs).     

Investigating the Photostability of Quantum Dots at the Single‐Molecule Level

Quantum dots (QDs) have shown great potential to provide spatial, temporal, and structural information for biological systems. However, blinking, photobleaching, and spectral blueshift are adverse effects on their practical applications in biomedical research. An investigation of the effects of six reducing agents including cysteine (Cys), 1,4‐dithiothreitol (DTT), ethyl gallate (EG), L ‐glutathione (GSH), mercaptoacetic acid (MAA), and thiourea (TU) on the photostability of single QDs was studied. Our experiments demonstrate that both DTT and EG effectively inhibit blinking, photobleaching, and spectral blueshift. GSH molecules block blinking and photobleaching of QDs. The other reagents, Cys, MAA, and TU, only have the ability to counteract blinking. Possible explanations are given on the basis of research evidence. The results suggest possibilities for significant improvements in QDs for biological applications by adjusting the environmental conditions.