光纤放大器受激布里渊散射效应抑制

提出了一种多波长窄线宽光纤放大器,其种子光由多个单频激光耦合而成,所有单频激光波长几乎相等（波长间隔小于1 nm）,频率间隔大于两倍布里渊频移。建立了此类多波长窄线宽光纤放大器的完整理论模型,分析了放大器中受激布里渊散射（SBS）与种子数目的关系。搭建了双波长和三波长窄线宽光纤放大器,进行SBS阈值输出功率测定实验。实验结果与理论模拟结果基本一致,验证了理论模型的合理性;双波长和三波长放大可以有效抑制SBS效应,大幅提高放大器输出功率。     

Propagation of a Hermite–Laguerre–Gaussian beam in a turbulent atmosphere

The propagation and spreading of a Hermite–Laguerre–Gaussian (HLG) beam in a turbulent atmosphere has been investigated. Based on the extended Huygens–Fresnel integral and some mathematical techniques, analytical expressions for the average intensity, the effective beam size, and the kurtosis parameter of an HLG beam in a turbulent atmosphere are derived, respectively. The average intensity distribution and the spreading properties of HLG beams in a turbulent atmosphere are numerically demonstrated. Upon propagation in a turbulent atmosphere, the central lobes in the beam spot of the HLG beam will evolve into the dominant lobes, and the peripheral lobes around the central lobes will evolve into the subdominant lobes. The influences of the additional angle parameter and the transversal mode numbers on the propagation of HLG beams in a turbulent atmosphere are also discussed. As the coherence length of the turbulence is determined by the propagation distance, the effect of the additional angle parameter on the effective beam size is related to the propagation distance. The kurtosis parameter generally increases with increasing the additional angle parameter. The influence of the transversal mode numbers on the kurtosis parameter is related to the additional angle parameter and the propagation distance. According to the practical need of free-space optical communications and remote sensing, the HLG beam in a turbulent atmosphere can be controlled by choice of the additional angle parameter and the transversal mode numbers.     

The ionic conductivity of Li6BaLa2M2O12 with coexisting Nb and Ta on the M sites

In a view to balancing cost and lithium ion conductivity, Li₆BaLa₂Nb _x Ta_2???x O₁₂ (x?=?0–2) was prepared by solid-state reaction, and its corresponding AC impedances were tested at temperatures ranging from 20 to 250 °C in air. Li₆BaLa₂Ta₂O₁₂ exhibits the highest conductivity, 8.77?×?10^?6?S/cm, and the second highest is Li₆BaLa₂Nb₂O₁₂ with 6.69?×?10^?6?S/cm. Partial replacement of Ta with Nb cannot bestow the advantages of cost saving or the enhancement of lithium ion conductivity. X-ray diffraction patterns revealed a gradual change as an increasing amount of Nb replaces Ta in Li₆BaLa₂Nb _x Ta_2???x O₁₂ (x?=?0–2), and it is thought that the trending of Nb and Ta to rest on the crystallographic planes is different.     

Ripening of single-layer InGaAs islands on GaAs（001）

The present paper discusses our investigation of InGaAs surface morphology annealed for different lengths of time.After annealing for 15 min,the ripening of InGaAs islands is completed.The real space scanning tunneling microscopy(STM) images show the evolution of InGaAs surface morphology.A half-terrace diffusion theoretical model based on thermodynamic theory is proposed to estimate the annealing time for obtaining flat morphology.The annealing time calculated by the proposed theory is in agreement with the experimental results.     

Comparative investigation of resistance and ability to trigger high voltage discharge for single and multiple femtosecond filaments in air

A comparative investigation of resistance and ability to trigger high voltage (HV) discharge for single filament (SF) and multiple filaments (MF) has been carried out. The experimental results show that the trend of the breakdown threshold of the SF exactly follows that of its resistance, but this is not the case for the MF. The MF's resistance is much smaller than SF's. However, the MF shows a bit higher HV breakdown threshold than the SF. The underlying physics is that the measured resistance of the MF is collectively contributed by every filament in the MF while the HV breakdown threshold is determined by only one single discharging path.     

Temperature dependent exchange bias effect in polycrystalline BiFeO3/FM (FM = NiFe, Co) bilayers

Extensive studies on the temperature (T) dependent exchange bias effect were carried out in polycrystalline BiFeO₃(BFO)/NiFe and BFO/Co bilayers. In contrast to single-crystalline BFO/ferromagnet (FM) bilayers, sharp increase of the exchange bias field (H _E ) below 50 K were clearly observed in both of these two bilayers. However, when T is higher than 50 K, H _E increases with T and decreases further when T is larger than 230 K (for BFO/NiFe) or 200 K (for BFO/Co), which is similar to those reported in single-crystalline BFO/FM bilayers. After the exploration of magnetic field cooling, the temperature dependent exchange bias can be explained considering two contributions from both the interfacial spin-glass-like frustrated spins and the polycrystalline grains in the BFO layer. Moreover, obvious exchange bias training effect can be observed at both 5 K and room temperature and the corresponding results can be well fitted based on a recently proposed theoretical model taking into account the energy dissipation of the AFM layer.     

染料掺杂光子晶体荧光带隙边缘的激射研究

利用激光全息光刻技术, 在重铬酸盐明胶 感光材料中制备了掺杂有机染料的层状光子晶体. 在532 nm纳秒脉冲激光激励下, 样品的荧光光谱表现出良好的带隙特征; 随着抽运能量的增加, 在荧光带隙带边位置获得了激射光, 并进一步研究了光子晶体的带边位置与染料荧光峰的匹配对激射的影响.带边位置越靠近染料的荧光峰, 激射阈值越低, 反之则不易产生激射.该研究为超低阈值光子晶体激光器的发展提供了思路和方法. 关键词： 全息光刻 光子晶体 荧光带隙 低阈值激射     

头孢唑啉酸与稀土元素Eu3+配合物的合成及配位位置的研究

头孢唑啉酸(cefazolin)为抗生素类药物,它的钠盐就是通常所说的先锋霉素. 我们通过共沉淀法合成了头孢唑啉酸与稀土元素Eu³⁺ 的固体配合物,并对其进行了光谱及波谱研究. 通过IR、¹H NMR和¹³C NMR确定了配合物的配位点,并探讨了配位机理.