Preparation and characterization of ZrCO/C composite aerogels

Zr-containing organic aerogels were synthesized by ligand substitution reaction of polyzirconoxone and 2, 4-dihydroxybenzoic acid, followed by polymerization with formaldehyde, and then supercritical drying using CO₂. After carbonization and carbothermal reduction under an argon atmosphere, ZrCO/C composite aerogels with controllable zirconium content (47.8–78.6 wt%) were obtained. The carbothermal reduction was substantially completed at 1,500 °C, and the obtained ZrCO/C composite aerogels exhibit low oxygen contents (9.4–6.7 wt%) and high surface areas (589–147 m²/g). Pore morphologies of the ZrCO/C composite aerogels were investigated in detail by nitrogen sorption measurements, scanning electron microscopy and its associated energy-dispersive X-ray microanalysis measurements. The results show that the aerogels are composed of carbon framework and Zr-conglomerations, and the surface area of aerogel is severely affected by its zirconium content. The presence of reductive ZrC crystals can greatly enhance the oxidation resistance ability of amorphous carbon framework and prevent collapse.     

EXAFS and DFT studies of microscopic structure with different density upon Zn(II) adsorption on anatase TiO2

Microscopic structures of Zn(II) adsorbed on anatase TiO₂ surface with different densities were studied using extended X-ray absorption fine structure (EXAFS) spectroscopy and density functional theory (DFT) calculation. Quantitative analysis of the EXAFS spectra showed that microscopic structures of Zn(II) were fourfold coordinated complexes, and different microscopic structures were present of the solid surface. Three modes of corner–corner/sharing-corner/sharing-edge adsorptions on anatase (101) face cluster were calculated by the DFT method. The results from DFT method were consistent with the EXAFS fittings. The optimized Zn–O average distance of the Zn–O tetrahedron was determined as about 2.00 Å. The Zn–Ti distance was 3.69 Å for the corner–corner adsorption, 3.35 Å for the sharing-corner adsorption, and 3.02 Å for the sharing-edge adsorption. According to the adsorption energies calculated by the DFT method, the microscopic structure of corner–corner adsorption was less stable than those of the other adsorption modes. With the increasing adsorption density, the corner–corner adsorption mode would be enhanced more intensively than the other adsorption modes.     

室内环境中脑控轮椅的路径跟踪控制

为了实现室内环境中脑控轮椅的自主导航,提出了一种简单有效的路径跟踪控制方法。给定的路径通常被表示为一系列离散点,根据这一特点,提出了分段直线路径跟踪方法,即依次跟踪由前后两个路径点构成的直线路径到达目标点。基于预瞄点技术并结合模糊算法和传统的PID控制方法设计控制器,完成各分段直线路径的跟踪,并给出了有效的切换条件。实验结果表明,本文提出的路径跟踪控制方法能够使脑控轮椅在室内环境中精确地跟踪给定路径。     

Context-free grammars for triangular arrays

We consider context-free grammars of the form G = {f → fb1+b2+1ga1+a2, g → fb1 ga1+1},where ai and bi are integers sub ject to certain positivity conditions. Such a grammar G gives rise to triangular arrays {T(n, k)}0≤k≤n satisfying a three-term recurrence relation. Many combinatorial sequences can be generated in this way. Let Tn (x) =∑nk=0T(n, k)xk. Based on the differential operator with respect to G, we define a sequence of linear operators Pn such that Tn+1(x) = Pn(Tn(x)). Applying the characterization of real stability preserving linear operators on the multivariate polynomials due to Borcea and Br?ndén, we obtain a necessary and sufficient condition for the operator Pn to be real stability preserving for any n. As a consequence, we are led to a sufficient condition for the real-rootedness of the polynomials defined by certain triangular arrays, obtained by Wang and Yeh.Moreover, as special cases we obtain grammars that lead to identities involving the Whitney numbers and the Bessel numbers.     

Transition metal-free synthesis of primary amides from aldehydes and hydroxylamine hydrochloride

Primary aromatic amides can be synthesized from aldehydes and hydroxylamine hydrochloride in the presence of Cs₂CO₃. Various aromatic aldehydes (include some heteroaromatic aldehydes) are able to generate the corresponding aromatic amides in moderate to excellent yields.     

Self-calibration method for cerium-doped lanthanum bromide scintillator detector in the 0.1–2.0 MeV energy range

In recent years, the cerium-doped lanthanum bromide, LaBr₃ (Ce = 5 %) detector is increasingly playing an important role in radiation measurements because of its higher energy resolution (~3 % at 662 keV), faster luminescence decay time (~35 ns) and higher detection efficiency compared to 7.65 cm × 7.65 cm NaI(Tl) detector. Intrinsic spectra between 1,800 and 3,000 keV derived from internal radioactivity within LaBr₃(Ce) scintillators have been investigated in some literatures, and these results are confirmed by the experiments in this work. In this paper, a new method for LaBr₃(Ce) detector energy calibration from 100 to 2,000 keV is proposed using the intrinsic spectra (self-calibration) instead of the standard gamma sources. Proof-of-concept experiment results show that self-calibration can guarantee energy accuracy of better than 0.815 % and can be applied outside the laboratory. The stability and applicability of this method are also investigated systematically.     

A turn-on fluorescence-sensing technique for glucose determination based on graphene oxide–DNA interaction

Graphene is a two-dimensional carbon nanomaterial one atom thick. Interactions between graphene oxide (GO) and ssDNA containing different numbers of bases have been proved to be remarkably different. In this paper we propose a novel approach for turn-on fluorescence sensing determination of glucose. Hydrogen peroxide (H₂O₂) is produced by glucose oxidase-catalysed oxidation of glucose. In the presence of ferrous iron (Fe²⁺) the hydroxyl radical (?OH) is generated from H₂O₂ by the Fenton reaction. This attacks FAM-labelled long ssDNA causing irreversible cleavage, as a result of the oxidative effect of ?OH, producing an FAM-linked DNA fragment. Because of the weak interaction between GO and short FAM-linked DNA fragments, restoration of DNA fluorescence can be achieved by addition of glucose. Due to the excellent fluorescence quenching efficiency of GO and the specific catalysis of glucose oxidase, the sensitivity and selectivity of this method for GO-DNA sensing are extremely high. The linear range is from 0.5 to 10 μmol L^?1 and the detection limit for glucose is 0.1 μmol L^?1. The method has been successfully used for analysis of glucose in human serum. Figure

?     

Phase‐preserved macroscopic visible‐light carpet cloaking beyond two dimensions

Transformation optics, a recent geometrical design strategy of light manipulation with both ray trajectories and optical phase controlled simultaneously, promises an invisibility cloaking device that can render a macroscopic object invisible even to a scientific instrument measuring optical phase. Recent “carpet” cloaks have extended their cloaking capability to broadband frequency ranges and macroscopic scales, but they only demonstrated the recovery of ray trajectories after passing through the cloaks, while whether the optical phase would reveal their existence still remains unverified. In this paper, a phase‐preserved macroscopic visible‐light carpet cloak is demonstrated in a geometrical construction beyond two dimensions. As an extension of previous two‐dimensional (2D) macroscopic carpet cloaks, this almost‐three‐dimensional carpet cloak exhibits three‐dimensional (3D) invisibility for illumination near its center (i.e. with a limited field of view), and its ideal wide‐angle invisibility performance is preserved in multiple 2D planes intersecting in the 3D space. Optical path length is measured with a broadband pulsed‐laser interferometer, which provides unique experimental evidence on the geometrical nature of transformation optics.

     

Neutral 1D Perovskite-Type ABX3 Phase Transition Material with a Narrowband Emission and Semiconductor Property

Cyclic organic amines are emerging as excellent building blocks to assemble organic–inorganic hybrid phase transition materials due to their flexible cyclic structure. Here, we have assembled a 1D organic-inorganic hybrid dielectric material C₅H₆NOPbBr₃ ( 1 ) by alloying the cyclic organic amine 3-hydroxypyridine. 1 displays a remarkable switchable dielectric response induced by an order-disorder transformation of the organic moiety, this transformation behaviour is confirmed by DSC and Hirshfeld surface measurements. More interestingly, 1 has a narrowband emission (FWHM=4.64 nm) at 590 nm; FWHM is a major quality figure for narrowband photodetectors. In addition, 1 exhibits semiconducting properties with an indirect bandgap of 2.78 eV by the analysis of the UV-Vis absorption results.     

Nonflammable nonaqueous electrolytes for lithium batteries

As the energy density of state-of-the-art lithium (Li)-ion batteries (LIBs) increases, the safety concern of LIBs using liquid electrolytes is drawing increasing attention. Flammability of electrolytes is a critical link of the overall safety performance of LIBs and Li metal batteries. For this reason, intensive efforts have been devoted to suppressing the flammability of liquid electrolytes. In this short review, the common approaches to reduce the flammability of the nonaqueous liquid electrolytes will be summarized. The advantages and limitations of these approaches will also be discussed.