开式单喷嘴喷雾冷却均匀性实验研究

针对高热流密度激光介质高效散热与均匀冷却技术需求,设计并搭建了以去离子水为冷却工质的开式单喷嘴喷雾冷却实验平台,实验研究获得了不同热流密度（16～110 W/cm²）、不同冷却工质流量（200～300 mL/min）以及不同喷雾高度（15～25 mm）下单相喷雾冷却换热系数及其冷却均匀性效果。结果表明：该实验工况下,不同热流密度条件下喷雾高度及工质流量对于单相喷雾冷却换热效率及温度均匀性影响显著;喷雾高度15 mm、工质流量200 mL/min时获得最大对流换热系数为5.93 W/（cm²·K）;喷雾高度15 mm、工质流量250 mL/min时面积20 mm×20 mm的热源表面温度均匀性最佳可优于0.6 ℃。     

平顶飞秒激光经圆锥透镜在熔融石英中成丝及超连续辐射

实验研究了平顶飞秒激光经圆锥透镜后在熔融石英中的成丝及超连续辐射.与高斯飞秒激光的成丝对比发现,平顶飞秒激光可以获得在圆锥透镜焦深区域内强度分布更为均匀的等离子体细丝,这一特征更有利于飞秒激光在固体介质中进行微纳加工等领域的应用.并且,在不损伤熔融石英的条件下,平顶飞秒激光成丝可以获得更高能量、更高转换效率的超连续辐射,这是因为若产生光强相近的细丝,平顶飞秒激光所需的初始激光能量更高,此激光能量下产生的细丝长度更长、均匀性更好.     

基于连续量子级联激光器的1103.4cm–1处NH3混叠吸收光谱特性研究

由于NH3在大气气溶胶化学中具有重要作用,所以快速和精确反演NH3浓度对环境问题非常重要.本文以9.05μm的室温连续量子级联激光器(quantum cascade laser,QCL)作为光源,采用波长扫描直接吸收可调谐二极管激光吸收光谱(tunable diode laser absorption spectroscopy,TDLAS)技术,研究了QCL在1103.4 cm–1的光谱特性,获得了激光器控制的温度电流与波长的关系.设计了QCL二级温控的低压实验平台,测量氨气在1103.4 cm–1处的6条混叠吸收线,在降低压强的情况下谱线展宽变小,使混叠光谱分离,由此计算各条吸收线的线强,进一步对测量不确定度进行分析.针对混叠严重的光谱提出了低压分离单光谱精确反演气体浓度的方法,并进行了实验验证.通过与HITRAN数据库进行结果对比,得出氨气在1103.4 cm–1的实验测量线强值与数据库偏差为2.71%-4.71%,实验测量线强值的不确定度在2.42%-8.92%,极低压条件下反演浓度与实际值的偏差在1%-3%.     

烧结烟气脱硫脱硝用活性炭混合钢渣复合材料的光谱学分析

钢渣是冶金工业中产生的主要固体废弃物,其产量约为每年粗钢产量的15%~20%。由于技术的局限,导致我国钢渣利用率较低,仅为年钢渣产量的10%,同时加之管理制度的不健全,导致钢渣大量露天堆放,对土地资源、地下水源,以及空气质量形成严重影响。固体废弃物再利用是资源可持续发展的重要途径之一,钢渣的主要化学成分为CaO, SiO2, Al2O3, MgO, Fe2O3, MnO, f-CaO等。面对上述问题,利用冶金固体废弃物与活性炭开发一种价格低廉且性能优越的活性炭混合钢渣复合材料,既是冶金固体废弃物的高附加值利用与资源可持续发展的重要途径之一,也是大幅降低改性活性炭生产成本与提高经济效益的重要途径之一。该研究创新性以活性炭与钢渣为研究对象,利用钢渣中含有的金属氧化物对活性炭进行改性处理制备用于烧结烟气脱硫脱硝的活性炭混合钢渣复合材料,通过搭建实验反应装置对活性炭混合钢渣复合材料的脱硫脱硝性能进行测试。利用X射线荧光光谱仪(XRF)对钢渣的化学成分进行测试与分析,比表面积及孔径测定仪(BET)对活性炭混合钢渣复合材料的孔结构进行测试与分析,傅里叶变换红外光谱仪(FTIR)对钢渣的结构组成进行测试与分析,扫描电子显微镜(SEM)对活性炭混合钢渣复合材料的微观结构进行测试与分析,以揭示活性炭与钢渣制备活性炭混合钢渣复合材料的机理,以及活性炭混合钢渣复合材料对烧结烟气脱硫脱硝的机理。结果表明:当钢渣为电炉热泼渣、钢渣与活性炭质量比为2∶4、钢渣与活性炭细度为400目时,活性炭混合钢渣复合材料具有良好的脱硫脱硝性能与合理的经济性,即脱硫效率为100%、脱硝效率为58%。活性炭混合钢渣复合材料具有的多孔结构对SO2和NO进行有作用,钢渣中Fe2O3与MnO2促使活性炭官能团进行催化还原反应提高脱硫脱硝性能,其中吸附作用是主导与前提,催化还原反应是辅助与协同。以期为高附加值的钢渣利用提供新途径,实现钢铁企业以废治废、以废增效的目的。     

Harmonically pump a femtosecond optical parametric oscillator to 1.13 GHz by a femtosecond 515 nm laser

We demonstrate a harmonically pumped femtosecond optical parametric oscillator(OPO)laser using a frequency-doubled mode-locked Yb:KGW laser at a repetition rate of 75.5 MHz as the pump laser.Based on a bismuth borate nonlinear crystal,repetition rates up to 1.13 GHz are realized,which is 15 times that of the pump laser.The signal wavelength is tunable from 700 nm to 887 nm.The maximum power of the signal is 207 m W at the central wavelength of 750 nm and the shortest pulse duration is 117 fs at 780 nm.The beam quality(M^2 factor)in the horizontal and vertical directions of the output beam are 1.077 and 1.141,respectively.     

基于EKF的水下LD通信精对准控制算法

高速激光通信中接收机与光斑中心很难处于精对准状态,导致水下光通信链路难以稳定建立.首先采用蒙特卡洛仿真统计法分析激光光子在海水中传输的接收光强分布规律,再通过实验对接收端的光斑图像进行采样分析,利用曲线拟合得到接收器位置与接收光强的关系.仿真与实验结果表明:光束经过25 m的水下传输,接收光强分布仍近似为高斯分布.采用非线性估计算法(扩展卡尔曼滤波)与基本状态控制反馈理论,根据接收光强度估计接收器当前位置与最大光强处的距离,通过反馈算法实现接收端与光斑中心的主动跟踪对准.算法仿真结果显示,接收端对准误差在2 mm以下,稳定后接收效率超过98%.     

GaInP/GaAs/Ge三结太阳电池不同能量质子辐照损伤模拟

以GaInP/GaAs/Ge三结太阳电池为研究对象,开展了能量为0.7, 1, 3, 5, 10 MeV的质子辐照损伤模拟研究,建立了三结太阳电池结构模型和不同能量质子辐照模型,获得了不同质子辐照条件下的I-V曲线,光谱响应曲线,结合已有实验结果验证了本文模拟结果,分析了三结太阳电池短路电流、开路电压、最大功率、光谱响应随质子能量的变化规律,利用不同辐照条件下三结太阳电池最大输出功率退化结果,拟合得到了三结太阳电池最大输出功率随位移损伤剂量的退化曲线.研究结果表明,质子辐照会在三结太阳电池中引入位移损伤缺陷,使得少数载流子扩散长度退化幅度随质子能量的减小而增大,从而导致三结太阳电池相关电学参数的退化随质子能量的减小而增大.相同辐照条件下,中电池光谱响应退化幅度远大于顶电池光谱响应退化幅度,中电池抗辐照性能较差,同时中电池长波范围内光谱响应的退化幅度比短波范围更大,表明中电池相关电学参数的退化主要来源于基区损伤.     

Multicaloric and coupled-caloric effects

The multicaloric effect refers to the thermal response of a solid material driven by simultaneous or sequential application of more than one type of external field.For practical applications,the multicaloric effect is a potentially interesting strategy to improve the efficiency of refrigeration devices.Here,the state of the art in multi-field driven multicaloric effect is reviewed.The phenomenology and fundamental thermodynamics of the multicaloric effect are well established.A number of theoretical and experimental research approaches are covered.At present,the theoretical understanding of the multicaloric effect is thorough.However,due to the limitation of the current experimental technology,the experimental approach is still in progress.All these researches indicated that the thermal response and effective reversibility of multiferroic materials can be improved through multicaloric cycles to overcome the inherent limitations of the physical mechanisms behind single-field-induced caloric effects.Finally,the viewpoint of further developments is presented.     

Overview of finite elements simulation of temperature profile to estimate properties of materials 3D-printed by laser powder-bed fusion

Laser powder bed fusion(LPBF),like many other additive manufacturing techniques,offers flexibility in design expected to become a disruption to the manufacturing industry.The current cost of LPBF process does not favor a try-anderror way of research,which makes modelling and simulation a field of superior importance in that area of engineering.In this work,various methods used to overcome challenges in modeling at different levels of approximation of LPBF process are reviewed.Recent efforts made towards a reliable and computationally effective model to simulate LPBF process using finite element(FE)codes are presented.A combination of ray-tracing technique,the solution of the radiation transfer equation and absorption measurements has been used to establish an analytical equation,which gives a more accurate approximation of laser energy deposition in powder-substrate configuration.When this new analytical energy deposition model is used in in FE simulation,with other physics carefully set,it enables us to get reliable cooling curves and melt track morphology that agree well with experimental observations.The use of more computationally effective approximation,without explicit topological changes,allows to simulate wider geometries and longer scanning time leading to many applications in real engineering world.Different applications are herein presented including:prediction of printing quality through the simulated overlapping of consecutive melt tracks,simulation of LPBF of a mixture of materials and estimation of martensite inclusion in printed steel.     

Influence of external load on friction coefficient of Fe-polytetrafluoroethylene

A coarse-grained molecular dynamics simulation model was developed in this study to investigate the friction process occurring between Fe and polytetrafluoroethylene(PTFE).We investigated the effect of an external load on the friction coefficient of Fe–PTFE using the molecular dynamics simulations and experimental methods.The simulation results show that the friction coefficient decreases with the external load increasing,which is in a good agreement with the experimental results.The high external load could result in a larger contact area between the Fe and PTFE layers,severer springback as a consequence of the deformed PTFE molecules,and faster motion of the PTFE molecules,thereby affecting the friction force and normal force during friction and consequently varying the friction coefficient.