O4对利用天顶散射光法测量大气组分含量的影响研究

通过实验证明是否考虑O₄的存在对利用天顶散射光测量大气组分含量的结果存在影响.介绍了天顶散射光的观测原理、实验仪器、测量方法、光谱处理以及浓度反演过程.用具体的实验数据说明考虑O₄在实验波段内的吸收能提高NO₂和O₃浓度反演结果的准确性.同时将观测得到的臭氧垂直柱密度与美国TOMS观测数据进行了对比. 关键词： 4')" href="#">O₄ 臭氧 天顶散射光 DOAS     

Detecting community structure using label propagation with weighted coherent neighborhood propinquity

Community detection has become an important methodology to understand the organization and function of various real-world networks. The label propagation algorithm (LPA) is an almost linear time algorithm proved to be effective in finding a good community structure. However, LPA has a limitation caused by its one-hop horizon. Specifically, each node in LPA adopts the label shared by most of its one-hop neighbors; much network topology information is lost in this process, which we believe is one of the main reasons for its instability and poor performance. Therefore in this paper we introduce a measure named weighted coherent neighborhood propinquity (weighted-CNP) to represent the probability that a pair of vertices are involved in the same community. In label update, a node adopts the label that has the maximum weighted-CNP instead of the one that is shared by most of its neighbors. We propose a dynamic and adaptive weighted-CNP called entropic-CNP by using the principal of entropy to modulate the weights. Furthermore, we propose a framework to integrate the weighted-CNP in other algorithms in detecting community structure. We test our algorithm on both computer-generated networks and real-world networks. The experimental results show that our algorithm is more robust and effective than LPA in large-scale networks.     

Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

Development of plasma pyrolysis/gasification systems for energy efficient and environmentally sound waste disposal

As more efficient and reliable torches for thermal plasma generation have become available in recent years, the use of thermal plasma as an energy source for pyrolysis/gasification has attracted much interest, and special attention has been paid to waste treatment for resource and energy recovery. Plasma pyrolysis/gasification systems have unique features such as the extremely high reaction temperature and ultra-fast reaction velocity compared to traditional pyrolysis/gasification systems. Plasma pyrolysis/gasification is therefore acknowledged as a novel pyrolysis/gasification technology with great potential in solid waste disposal. This paper gives a comprehensive review on the development of fundamental researches on plasma pyrolysis/gasification systems including direct current (DC) arc plasma system and radio frequency (RF) plasma system with an emphasis on reactor design such as plasma fixed/moving bed reactor system, plasma entrained-flow bed reactor system and plasma spout-fluid bed reactor system.     

置换群关于变换后基的强生成集的算法

本文给出置换群关于变换后的基的强生成集的一种算法及其理论证明,并讨论了既约强生成集和最小强生成集的问题。     

中国聚变工程实验堆真空室超压保护系统中爆破片的选型与计算

参照相关标准,对聚变装置真空室超压保护系统(VVPSS)中爆破片进行了选型。结合VVPSS的工作要求,完成了爆破片的设计计算,初步得到爆破片直径为882mm,厚度为1mm。利用有限元分析软件对多种型号爆破片进行结构分析比较,最终选用了反拱环向开缝型爆破片。对最终选定的爆破片进行优化设计,使其达到设计要求。     

Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.     

基于氧化石墨烯的长周期光纤光栅的全光控制

实验验证了一种通过将氧化石墨烯分散液沉积在长周期光纤光栅的全光控制的相关研究。通过外加的垂直泵浦光的作用,氧化石墨烯吸收泵浦光产生热量,改变长周期光纤光栅的包层模式的相位差,由于热膨胀的作用改变了氧化石墨烯所覆盖部分的光栅周期,使得谐振谱发生了移动,其最大调制深度可达10.6 dB,谐振谱最大可红移12.8 nm。通过实验发现,沉积相同浓度氧化石墨烯分散液的次数影响实验结果,通过在相同光栅的相同位置分别沉积三次,发现沉积三次可以在光纤表面获得更加均匀的氧化石墨烯膜,进行了时间响应的测试,其中沉积三次后的长周期光纤光栅的响应速度可达0.61 ms,沉积多次氧化石墨烯分散液可以在光纤表面沉积得更加平整均匀,从而获得更大的导热性能。     

质子辐照硼硅酸盐玻璃盖片的物理效应分析

作为航天器电源系统的重要组成部分,太阳电池需要更高的转换效率和可靠性以及更长的使用寿命。通过在太阳电池表面覆盖抗辐照玻璃盖片,可以增强太阳电池对粒子辐射的防护,延长太阳电池的服役寿命,使航天器获得可靠的能源供应。硼硅酸盐玻璃就是一种理想的太阳电池玻璃盖片材料。采用蒙特卡罗方法,结合SRIM软件模拟研究质子辐照硼硅酸盐玻璃的损伤物理机理。基于粒子与物质相互作用的理论以及基本公式,通过分析不同入射能量的质子在硼硅酸盐玻璃中的阻止本领、电离能损、位移能损、空位的产生情况,对辐照损伤的物理机制进行研究。结果表明：能量为30～120 keV的质子辐照损伤主要发生在硼硅酸盐玻璃表面;质子沉积、空位分布等均为Bragg峰型分布;电离能损是能量损失的主要部分,随入射能量的增加而增大,导致电子的电离和激发;位移能损在玻璃内部随能量降低而增大,导致硼、氧和硅等空位缺陷的产生;电离效应和缺陷的产生是硼硅酸盐玻璃色心形成的重要原因。     

基于激光雷达的垂直能见度反演算法及其误差评估

针对大气垂直方向上消光系数分布不均匀难以用传统方法直接测量垂直能见度的问题,提出了一种基于激光雷达探测垂直能见度的计算方法。根据大气辐射传输基本原理,借助于辐射传输方程,推导出了垂直能见度的计算公式;然后利用激光雷达原理方程和Klett算法反演出大气垂直方向上的消光系数分布,基于此提出了垂直能见度的迭代算法。最后,利用灰色模型GM(1,1)和批统计算法,对激光雷达反演得到的后向散射系数进行了评估,给出了误差置信区间为（0.760±0.339）×10⁻⁴（srad·km）⁻¹。结果表明,该方法是一种特别有效的计算垂直能见度的方法,符合探测的基本需求,且误差小精度高。