离散式任意充磁角度Halbach永磁电机解析模型研究

Halbach电机因其自身优势在新型船舶推进、海洋洋流发电等方面受到广泛关注. 本文在假设铁磁材料线性和定子内表面光滑的条件下, 通过将任意充磁角度Halbach阵列等效为两组90° Halbach(或180° Halbach)阵列的矢量合成, 提出了一种分析离散式任意充磁角度Halbach永磁电机气隙磁场的解析方法; 通过对电机中磁标量势的傅里叶级数进行计算, 推导出了最简单的90° Halbach永磁电机在极坐标系下的气隙磁密表达式, 并在此基础上, 给出了任意充磁角度Halbach电机永磁体磁化强度在一个极下的表达式, 进而得出任意充磁角度Halbach电机气隙磁密的分布, 并分析了气隙磁密与电机极对数、永磁体厚度和充磁角度间的关系. 最后通过有限元和试验结果验证了本文方法的正确性. 关键词： 离散式Halbach电机 任意充磁角度 矢量等效 解析模型     

Detecting community structure using label propagation with weighted coherent neighborhood propinquity

Community detection has become an important methodology to understand the organization and function of various real-world networks. The label propagation algorithm (LPA) is an almost linear time algorithm proved to be effective in finding a good community structure. However, LPA has a limitation caused by its one-hop horizon. Specifically, each node in LPA adopts the label shared by most of its one-hop neighbors; much network topology information is lost in this process, which we believe is one of the main reasons for its instability and poor performance. Therefore in this paper we introduce a measure named weighted coherent neighborhood propinquity (weighted-CNP) to represent the probability that a pair of vertices are involved in the same community. In label update, a node adopts the label that has the maximum weighted-CNP instead of the one that is shared by most of its neighbors. We propose a dynamic and adaptive weighted-CNP called entropic-CNP by using the principal of entropy to modulate the weights. Furthermore, we propose a framework to integrate the weighted-CNP in other algorithms in detecting community structure. We test our algorithm on both computer-generated networks and real-world networks. The experimental results show that our algorithm is more robust and effective than LPA in large-scale networks.     

Semipolar (11\bar 2\bar 2) ZnO thin films grown on LaAlO3‐buffered LSAT (112) single crystals by pulsed laser deposition

Semipolar (11\bar 2 \bar 2) ZnO was successfully grown on (112) LaAlO₃/(LaAlO₃)_0.29(Sr₂AlTaO₆)_0.35 substrate by pulsed laser deposition. The epitaxial relationship is [11\bar 23]_{\rm ZnO} // [11\bar 1]_{\rm LAO/LSAT} with the polar axis of [000\bar 1]_{\rm ZnO} pointing to the surface. For ZnO films with thickness of 1.6 μm, the threading dislocation density is ～1 × 10⁹ cm^–2, and the density of basal stacking faults is below 1 × 10⁴ cm^–1. The (11\bar 2 \bar 2) ZnO exhibits strong D⁰X emissions with a FWHM of 9 meV and very few green–yellow emissions in the low‐temperature (10 K) and room‐temperature photoluminescence spectra, respectively.

     

Selection of optimal combinations of inputs in a partial least squares model for prediction of soil organic matter

Abstract

Partial least squares model is widely used in estimation of soil physical and chemical parameters such as soil organic matter and moisture content, due to its advantages in dealing with collinearity of variables like hyperspectral reflectance. However, it is hard to determine optimal combination of partial least squares model input for soil organic matter prediction since there are lots of possibilities such as, different mathematical transformation of spectral reflectance, wavelength ranges, and spectral resolution. Laboratory hyperspectral reflectance of soils in Songnen plain were analyzed in this study, and the orthogonal experimental design method for deriving optimal combination of input variables for soil organic matter prediction models was introduced. For intercalating orthogonal experimental design table, five different levels which commonly used by researchers were assigned to factors. Results show that the optimal combination input for single black soil is using the derivative logarithmic reciprocal reflectance in the wavelength range selected by multiple stepwise regression at a spectral resolution of 5?nm (R²=?0.95, RMSE?=?0.21, and RPD?=?4.49), and different soils is using continuum removed in the wavelength range selected by MSR at a spectral resolution of 5?nm (R²?=?0.77, RMSE?=?0.74, and RPD?=?2.08). With optimal combination input, the partial least squares model prediction ability was evaluated as excellent for single black soil, possible for different soils. This study illustrates the orthogonal experimental design method can be an effective way to identify the optimal input variables of a partial least squares model for soil organic matter prediction, and multiple stepwise regression can be a preprocessing step to reduce hyperspectral data redundancy before using partial least squares to predict soil organic matter. Overall, this study provides a new approach for determining optimal input of partial least squares predicting model.     

Development of plasma pyrolysis/gasification systems for energy efficient and environmentally sound waste disposal

As more efficient and reliable torches for thermal plasma generation have become available in recent years, the use of thermal plasma as an energy source for pyrolysis/gasification has attracted much interest, and special attention has been paid to waste treatment for resource and energy recovery. Plasma pyrolysis/gasification systems have unique features such as the extremely high reaction temperature and ultra-fast reaction velocity compared to traditional pyrolysis/gasification systems. Plasma pyrolysis/gasification is therefore acknowledged as a novel pyrolysis/gasification technology with great potential in solid waste disposal. This paper gives a comprehensive review on the development of fundamental researches on plasma pyrolysis/gasification systems including direct current (DC) arc plasma system and radio frequency (RF) plasma system with an emphasis on reactor design such as plasma fixed/moving bed reactor system, plasma entrained-flow bed reactor system and plasma spout-fluid bed reactor system.     

置换群关于变换后基的强生成集的算法

本文给出置换群关于变换后的基的强生成集的一种算法及其理论证明,并讨论了既约强生成集和最小强生成集的问题。     

中国聚变工程实验堆真空室超压保护系统中爆破片的选型与计算

参照相关标准,对聚变装置真空室超压保护系统(VVPSS)中爆破片进行了选型。结合VVPSS的工作要求,完成了爆破片的设计计算,初步得到爆破片直径为882mm,厚度为1mm。利用有限元分析软件对多种型号爆破片进行结构分析比较,最终选用了反拱环向开缝型爆破片。对最终选定的爆破片进行优化设计,使其达到设计要求。     

EicC对撞光学设计

EicC是中国科学院近代物理研究所计划建造的中国电子-离子对撞机装置,该对撞机质心能位于20 GeV附近,是研究海夸克的最佳能量窗口,同时还可研究胶子和价夸克。EicC对撞粒子为高极化率质子和电子束团,质子环pRing采用八字环设计方案,可以更好地保持极化质子束团极化率,电子环eRing采用跑道形环设计方案,可以更好地利用隧道空间。该装置电子束流能量中心值为3.5 GeV,电子束RMS发射度为水平方向60 nm·rad,垂直方向60 nm·rad,对撞点b函数为水平方向0.4 m,垂直方向0.12 m;质子束流能量中心值20 GeV,质子束RMS发射度为水平方向300 nm·rad,垂直方向180 nm·rad,对撞点b函数为水平方向0.08 m,垂直方向0.04 m,设计亮度2×1033 cm–2s–1。EicC采用双对撞区非对称光学设计,通过对EicC不同色品补偿方案的研究,最终确定了弧区加短直线节共同补偿的色品补偿方案;通过研究对撞点处b函数以及对撞点间相移对动力学孔径的影响,最终得到pRing动力学孔径大于8 s(s为束团RMS尺寸)、eRing动力学孔径大于20 s,满足大于束团尺寸6 s的要求。     

An improved evaluation of the neutron background in the PandaX-Ⅱ experiment

In dark matter direct detection experiments,neutron is a serious source of background,which can mimic the dark matter-nucleus scattering signals.In this paper,we present an improved evaluation of the neutron background in the PandaX-II dark matter experiment by a novel approach.Instead of fully relying on the Monte Carlo simulation,the overall neutron background is determined from the neutron-induced high energy signals in the data.In addition,the probability of producing a dark-matter-like background per neutron is evaluated with a complete Monte Carlo generator,where the correlated emission of neutron(s)andγ(s)in the(α,n)reactions and spontaneous fissions is taken into consideration.With this method,the neutron backgrounds in the Run 9(26-ton-day)and Run 10(28-ton-day)data sets of PandaX-II are estimated to be(0.66±0.24)and(0.47±0.25)events,respectively.     

Identifying the viscoelastic properties of soft matter from the indentation response of a hard film-soft substrate system

The indentation technique is widely used in measuring the mechanical properties of soft matter at the microscale or nanoscale,but still faces challenges by these unique properties as well as the consequent strong surface adhesion, including the strong nonlinear effect, unclear judgment of the contact point, difficulties in estimating the contact area, and the risk of the indenter piercing the sample. Here we propose a two-step method to solve these problems: lay a hard film on a soft matter, and obtain the viscoelastic properties of this soft matter through the indentation response of this composite structure. We first establish a theoretical indentation model of the hard film-soft substrate system based on the theory of plates, elastic-viscoelastic correspondence principle and Boltzmann superposition principle. To verify the correctness of this method, we measure the mechanical properties of the methyl vinyl silicone rubber(MVSR) covered by a Cu nanofilm. Finally, we test the effectiveness and error sensitivity of this method with the finite element method(FEM). The results show that our method can accurately measure the mechanical properties of soft matter, while effectively circumventing the problems of the traditional indentation technique.