Carbon nanotube emitters and field emission triode

Based on our study on field emission from multi-walled carbon nanotubes (MWNTs), we experimentally manufactured field emission display (FED) triode with a MWNTs cold cathode, and demonstrated an excellent performance of MWNTs as field emitters. The measured luminance of the phosphor screens was 1.8 × 103 cd/m2 for green light. The emission is stable with a fluctuation of only 1.5% at an average current of 260 μA.     

Novel identification approach for nonlinear systems with hysteresis

Nonlinear Dynamics - A new identification approach for a nonlinear system with hysteresis, namely a cascading Bouc–Wen hysteresis model with linear dynamics, is proposed in this study. The...     

Chaotic Dynamics of a Josephson Junction with a Ratchet Potential and Current-Modulating Damping

The chaotic dynamics of a Josephson junction with a ratchet potential and current-modulating damping are studied. Under the first-order approximation, we construct the general solution of the first-order equation whose boundedness condition contains the famous Melnikov chaotic criterion. Based on the general solution, the incomputability and unpredictability of the system’s chaotic behavior are discussed. For the case beyond perturbation conditions, the evolution of stroboscopic Poincaré sections shows that the system undergoes a quasi-periodic transition to chaos with an increasing intensity of the rf-current. Through a suitable feedback controlling strategy, the chaos can be effectively suppressed and the intensity of the controller can vary in a large range. It is also found that the current between the two separated superconductors increases monotonously in some specific parameter spaces.     

KrF激光泵浦H2受激拉曼放大

利用KrF激光泵浦高压H_2,在同轴前向的受激拉曼散射(SRS)作用下,产生受激拉曼放大,1阶Stokes光对泵浦光的转换效率为17.2％,并对影响放大过程和转换效率的若干因素作了分析。     

Superhydrophobic surfaces fabricated by microstructuring of stainless steel using a femtosecond laser

Fabrication of superhydrophobic surfaces induced by femtosecond laser is a research hotspot of superhydrophobic surface studies nowadays. We present a simple and easily-controlled method for fabricating stainless steel-based superhydrophobic surfaces. The method consists of microstructuring stainless steel surfaces by irradiating samples with femtosecond laser pulses and silanizing the surfaces. By low laser fluence, we fabricated typical laser-induced periodic surface structures (LIPSS) on the submicron level. The apparent contact angle (CA) on the surface is 150.3°. With laser fluence increasing, we fabricated periodic ripples and periodic cone-shaped spikes on the micron scale, both covered with LIPSS. The stainless steel-based surfaces with micro- and submicron double-scale structure have higher apparent CAs. On the surface of double-scale structure, the maximal apparent CA is 166.3° and at the same time, the sliding angle (SA) is 4.2°.     

Hausdorff dimension of the recurrence set of Gauss transformation

Let x₀ ? [0,1){x_0\in [0,1)} be an irrational number and {t _n } _n≥1 be a nondecreasing sequence of natural numbers. The recurrence set of Gauss transformation T is defined by

Spin-polarized transport in zigzag graphene nanoribbons adsorbing nonmagnetic atomic chain

We theoretically study the electron transport properties in a ferromagnetic/normal/ferromagnetic tunnel junction, which is deposited on the top of a topological surface. The conductance at the parallel (P) configuration can be much bigger than that at the antiparallel (AP) configuration. Compared P with AP configuration, there exists a shift of phase which can be tuned by gate voltage. We find that the exchange field weakly affects the conductance of carriers for P configuration but can dramatically suppress the conductance of carriers for AP configuration. This controllable electron transport implies anomalous magnetoresistance in this topological spin valve, which may contribute to the development of spintronics. In addition, there shows an existence of Fabry-Perot-like electron interference in our model based on the topological insulator, which does not appear in the same model based on the two dimensional electron gas.     

Ultrafast transverse thermoelectric response in c‐axis inclined epitaxial La0.5Sr0.5CoO3 thin films

Ultrafast transverse thermoelectric voltage response has been observed in c‐axis inclined epitaxial La_0.5Sr_0.5CoO₃thin films. Voltage signals with the rise time of 7 ns have been detected under the irradiation of pulse laser with duration of 28 ns. A concept, named response rate ratio, has been proposed to evaluate the intrinsic response rate, and this ratio in La_0.5Sr_0.5CoO₃is smaller than that in other reported materials. The low resistivity is thought to be responsible for the ultrafast response, as low resistivity induces small optical penetration depth, and response time has a monotonous increasing relationship with this depth.

     

Morphology of Polystyrene Core–dPoly(ethylene oxide) Shell Arborescent Copolymer Micelles from Small-Angle Neutron Scattering Analysis

Arborescent (dendrigraft) copolymers with a branched polystyrene (PS) core grafted at the chain termini with deuterated poly(ethylene oxide) segments (PS-dPEO) were characterized in benzene and acetone by small-angle neutron scattering measurements using the contrast matching technique. While copolymers incorporating a G1 (twice-grafted) PS core aggregated to some extent, the portion of the scattering curve corresponding to non-aggregated copolymer molecules could still be analyzed to determine the shape and segment radial density profile for core and shell. These were derived from the pair distance distribution function P(r) and the scattering length density contrast profile Δρ(r) = ρ(r) ? ρ(solvent), obtained by the indirect Fourier transformation and deconvolution methods. The profiles obtained for the G1 copolymer are consistent with a well-defined PS core–dPEO shell morphology, only observed previously for upper generation (G4) polymers with deuterated PS (dPS) chains grafted randomly on arborescent PS substrates. Detailed morphological analysis could not be carried out for an analogous G3 arborescent PS copolymer terminally grafted with dPEO segments due to extensive aggregation in both solvents.     

Influence of the structure parameters on the gain and noise figure in silicon parametric amplifiers based on SOI Rib waveguides

Gain and Noise figure (NF) characteristics in dual-pump parametric amplifier based on silicon on insulator (SOI) Rib waveguides are numerically investigated in the presence of nonlinear losses. The impact of structure parameters of the silicon optical parametric amplifiers (SOPAs) on the gain and the NF are also analyzed. The results show that both the height and the width of the silicon on insulator (SOI) can affect the gain and the NF of SOPAs. 354 nm bandwidth (3 dB) and 8.135 maximum gain can be achieved by tailoring the structure parameters of the SOI rib waveguides. Moreover, the dispersion and the effective mode area of SOI are also analyzed.