Microscopic multi-point temperature sensing based on microfiber double-knot resonators

A novel fiber-optic sensor structure fabricated by cascading two optical microfiber knot resonators (MKRs) is proposed and demonstrated in this paper. A theoretical model for describing the principle of the sensing structure is given and its temperature responses are characterized experimentally. Experimental results show that high-precision and simultaneous multi-point temperature sensing in micro-scale can be achieved. Such a sensing structure also has the potential for achieving dual-parameter measurement to eliminate the cross-talk between two parameters in micro-scale.     

Spectral tuning of InGaAs/GaAs quantum dot infrared photodetectors with bandpass guided‐mode resonance filters

Quantum dot infrared photodetectors can be coupled with micro‐structured filters to create narrowband sensors. Guided‐mode resonance filters based on a high‐index dielectric slab can exhibit bandpass characteristics that are suitable for monolithic integration with focal‐plane arrays. Here, patterned Ge filters were integrated with InGaAs/GaAs quantum dot detectors to linearly tune their 77 K photoresponse peaks from 5.6 µm to 6.2 µm. The dark current was not influenced by these filters but the ability to narrow the photoresponse linewidth was limited by substrate scattering, which is often encountered with front‐side illumination architectures. (© 2014 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Goniodilactone and gomoheptenolactone,two novel cytotoxic styryllactones from the leaves of Goniothalamus cheliensis

Two novel styryllactones,goniodilactone（1） and gonioheptenolactone（2）,were isolated from the leaves of Goniothalamus cheliensis Hu.Their structures were determined on the basis of spectroscopic data as well as X-ray crystallography analysis. Compounds 1 and 2 exhibited significant cytotoxicities in a panel of human cancer cells,including DU-145,PC-3,MCF-7,A-549, KB and KBvin,with GI₅₀S in the range of 1.29-4.56μg/mL.     

A Novel Synthesis of 2-Alkylthiobenzothiazoles and 2-Alkylthiobenzoxazoles

Abstract

3H-Benzothiazole-2-thione and 3H-benzoxazole-2-thione were selectively S-alkylated by use of O-alkylisoureas as the alkylating reagents. The reactions could be performed under mild reaction conditions in short reaction times, and high yields were obtained using O-primary-alkylisoureas, whereas low yields were obtained with sec- and tert-alkylisoureas.     

Anti‐static Agent Containing Zinc Oxide and its Modification for PA6 Fiber

A new anti‐static agent was synthesized from zinc oxide‐adipic acid‐polyethylene glycol and caprolactam by three‐step reactions. The antistatic agent (called poly(ether ester amide zinc oxide) or PEEAZ) was analyzed by IR and DSC. The results showed that zinc oxide existed in the main chain of PEEAZ. The glass temperature and melt temperature of poly(ether ester amide zinc oxide) (referred to as PEEAZ in the following) decreased with increasing poly(ether ester zinc oxide) increasing in PEEAZ. Antistatic PA6 fiber was obtained by adding PEEAZ 2–8% (wt/wt) to PA6 during blend spinning. The specific resistance and the static half‐value period of PA6 fiber was less than 10⁹Ω · cm and 60 sec, respectively. Excellent antistatic property remained after being washed 30 times.     

Studies on Polysiloxane-based Alicyclic Episulfide Resin

The polysiloxane-based alicyclic episulfide resin (PSCER) was synthesized through substitution of oxygen atoms in 1,3-bis[2-(3{7-oxabicyclo[4,1,0]hepyl})ethyl]-tetramethyldisiloxane with sulfur atoms using potassium thiocyanate (KSCN) as the reagent. The product was purified by column chromatography, and the by-products were isolated. It was found by ¹H-NMR and ¹³C-NMR that the by-products were cycloolefins formed by desulfurization of the episulfide groups. PSCER was unstable; desulfurization took place easily, especially at high temperatures. The PSCER resin could not be cured with methylhexahydrophthalic anhydride (MeHPPA). When m-phenylenediamine or isophorondiamine was used as curing agent, PSCER showed a higher reactivity compared with the parent epoxide. However, the reactivity of the alicyclic episulfide was much lower than the polysiloxane based aliphatic episulfide for the steric hindrance of the six member ring. Desulfurization took place upon curing of the alicyclic episulfide resin, therefore the cured resin showed poor mechanical properties. Thermal stability of cured PSCER resin was also poor on account of low bonding energy of C-S and crosslinking density.     

Thermal Properties of Copoly(L‐lactic acid/glycolic acid) by Direct Melt Polycondensation

Poly(L‐lactic acid‐co‐glycolic acid) (PLGA) was prepared from hydroxy‐acids with melt polymerization. In this way, the copoly(L‐LA/GA) (PLGA) was synthesized directly using a binary catalyst (tin chloride dihydrate/p‐toluenesulfonic acid). The thermal properties of PLGA were studied by differential scanning calorimetry (DSC) and nuclear magnetic resonance (NMR). The results show that the melting point of PLGA decreases with increasing mole fraction of GA units in the copolymer. In addition, the melting point of polymer also decreases with increasing degree of racemization of the polymer.