Flow injection analysis : Part IX. A New Approach to Continuous Flow Titrations

Studies of dispersion patterns in nonsegmented streams, flowing through narrow open tubes, show that it is possible to obtain highly reproducible concentration gradients within a sample zone injected into the moving stream. By varying the geometry of the flow path, low, medium and high dispersion patterns can be achieved; the high dispersion pattern forms the basis for a new approach to continuous flow titrimetry. In this type of titration, discrete samples are passed through a gradient device and are then mixed with a continuously flowing stream of titrant of fixed concentration. The new technique has been tested for potentiometric as well as spectrophotometric end-point indication. A simple one-channel system allows titrations to be performed automatically in less than 1 min.     

Half-life measurement of <Superscript>126</Superscript>Sn isolated from Hanford nuclear defense waste

Summary Long-term risk assessment of residual and disposed nuclear fuel reprocessing waste requires good knowledge of component isotopes with long half-lives. For example, the accuracy of the accepted ¹²⁶Sn half-life of approximately 100,000 years is insufficient for desired risk assessments. From modeling and sampling, ¹²⁶Sn is known to exist in Hanford nuclear waste. Excess portions of waste characterization samples were used to isolate ¹²⁶Sn for measurement of its half-life. Isolation was performed with ion-exchange resins. The resulting ¹²⁶Sn was gamma-assayed with a hyperpure germanium spectrometer for decay photon identification and activity values. An inductively coupled plasma/mass spectrometer was used to measure the atom quantity of the isolated ¹²⁶Sn. The separation chemistry, observed gamma energies, and calculated half-life are presented. The half-life of ¹²⁶Sn estimated in this work is (2.33±0.10) ^. 10⁵ years.     

A probabilistic approach to classifying metabolic stability

Metabolic stability is an important property of drug molecules that should-optimally-be taken into account early on in the drug design process. Along with numerous medium- or high-throughput assays being implemented in early drug discovery, a prediction tool for this property could be of high value. However, metabolic stability is inherently difficult to predict, and no commercial tools are available for this purpose. In this work, we present a machine learning approach to predicting metabolic stability that is tailored to compounds from the drug development process at Bayer Schering Pharma. For four different in vitro assays, we develop Bayesian classification models to predict the probability of a compound being metabolically stable. The chosen approach implicitly takes the "domain of applicability" into account. The developed models were validated on recent project data at Bayer Schering Pharma, showing that the predictions are highly accurate and the domain of applicability is estimated correctly. Furthermore, we evaluate the modeling method on a set of publicly available data.     

Analysis of the 3-dimensional electron distribution in silicon using directional Compton profile measurements

A method of reconstructing the electron momentum density (p), and its Fourier transform,B(t), from a series of directional Compton profiles is described. It is based on a double Fourier inversion technique and an expansion in lattice harmonic functions. The effect of random errors has been analysed, and the implications for the data collection discussed. We have used the reconstruction technique to obtain (p) andB(t) for silicon from six directional Compton profiles measured with 412 KeV gamma-radiation. The experimental result is in good agreement with earlier measurements and with available solid state theories. A recent Wannier function calculation for silicon using orthogonalised bond orbitals provides a useful tool for identifying the physical origins of the observed anisotropies. A comparison between the information presented in position and momentum space shows that the ease of interpretation depends upon the degree to which the various interactions give rise to localised features in each representation.     

New Results in the Synthesis of Styrylazulene Derivatives: Application of the ‘Anil synthesis’ to the preparation of azulenes substituted with styryl groups at the seven-membered ring

The synthesis of 4,6,8-trimethyl-1-[(E)-4-R-styryl]azulenes 5 (R=H, MeO, Cl) has been performed by Wittig reaction of 4,6,8-trimethylazulene-1-carbaldehyde ( 1 ) and the corresponding 4-(R-benzyl)(triphenyl)phosphonium chlorides 4 in the presence of EtONa/EtOH in boiling toluene (see Table 1). In the same way, guaiazulene-3-carbaldehyde ( 2 ) as well as dihydrolactaroviolin ( 3 ) yielded with 4a the corresponding styrylazulenes 6 and 7 , respectively (see Table 1). It has been found that 1 and 4b yield, in competition to the Wittig reaction, alkylation products, namely 8 and 9 , respectively (cf. Scheme 1). The reaction of 4,6,8-trimethylazulene ( 10 ) with 4b in toluene showed that azulenes can, indeed, be easily alkylated with the phosphonium salt 4b . 4,6,8-Trimethylazulene-2-carbaldehyde ( 12 ) has been synthesized from the corresponding carboxylate 15 by a reduction (LiAlH₄) and dehydrogenation (MnO₂) sequence (see Scheme 2). The Swern oxidation of the intermediate 2-(hydroxymethyl)azulene 16 yielded only 1,3-dichloroazulene derivatives (cf. Scheme 2). The Wittig reaction of 12 with 4a and 4b in the presence of EtONa/EtOH in toluene yielded the expected 2-styryl derivatives 19a and 19b , respectively (see Scheme 3). Again, the yield of 19b was reduced by a competing alkylation reaction of 19b with 4b which led to the formation of the 1-benzylated product 20 (see Scheme 3). The ‘anil synthesis’ of guaiazulene ( 21 ) and the 4-R-benzanils 22 (R=H, MeO, Cl, Me₂N) proceeded smoothyl under standard conditions (powered KOH in DMF) to yield the corresponding 4-[(E)-styryl]azulene derivatives 23 (see Table 4). In minor amounts, bis(azulen-4-yl) compounds of type 24 and 25 were also formed (see Table 4). The ‘anil reaction’ of 21 and 4-NO₂C₆H₄CH=NC₆H₅ ( 22e ) in DMF yielded no corresponding styrylazulene derivative 23e . Instead, (E)-1,2-bis(7-isopropyl-1-methylazulen-4-yl)ethene ( 27 ) was formed (see Scheme 4). The reaction of 4,6,8-trimethylazulene ( 10 ) and benzanil ( 22a ) in the presence of KOH in DMF yielded the benzanil adducts 28 to 31 (cf. Scheme 5). Their direct base-catalyzed transformation into the corresponding styryl-substituted azulenes could not be realized (cf. Scheme 6). However, the transformation succeeded smoothly with KOH in boiling EtOH after N-methylation (cf. Scheme 6).     

Die durch Silberionen katalysierte Umlagerung von Propargyl-phenyläther

It is known that propargyl-phenylethers rearrange at about 200° to 2 H-chromenes [1–4]. It is shown that this rearrangement occurs in benzene or chloroform at lower temperatures (20–80°) in the presence of silver-tetrafluoroborate (or-trifluoracetate). The ethers examined are presented in Scheme 1. Thus in chloroform at 61° in the presence of AgBF₄, phenyl-propargylether ( 3 ) yields 2 H-chromene ( 13 ). With 0.78 molar equivalents AgBF₄ in benzene at 80° the same ether 3 yields a 3:1 mixture of 2-methyl-cumaron ( 14 ) and 2 H-chromene ( 13 ). From 1′-methylpropargyl-phenylether ( 4 ) and 2′-butinyl-3,5-dimethylphenylether ( 5 ) under similar conditions the corresponding chromenes 16 and 17 resp. are obtained. Rearrangement of propargyl- and 2′-butinyl-1-methyl-2-naphthylether ( 6 and 7 resp.) in benzene at 80° in the presence of AgBF₄ gives the corresponding allenyl-naphthalenones 18 and 19 resp. Treatment of propargyl- and 2′-butinyl-mesityl-ether ( 8 and 9 resp.), and propargyl- and l′-methylpropargyl- 2 , 6 -dimethyl-phenylether ( 10 and 11 resp.) in benzene at 80° with AgRF, yields as the only product the corresponding 3 -allenyl-phenols 21 , 22 , 24 and 25 (Scheme 3). It is shown that in the presence of μ-dichlor-dirhodiuni (1)-tetracarbonyl in benzene a t 80° the ether 4 rearranges to 2-methyl-2H-chromene (16). However with this catalyst the predominant reaction is a cleavage to phenol. No reaction was observed when ethers 3 and 12 , (Scheme 7 ) were treated with the tris-(trimethylsily1)-ester of vanadic acid in benzene a t 80° (see also [8]). By analogy with the known mechanism for thc silver catalysis of the reversible propargylesterl/allenylester rearrangement [S], the silver (1)ion is assumed to form a pre-equilibrium π-complex with the C, C-triplebond of the substrate. This complex then undergoes a [3s, 3s]-sigmatropic rearrangement (Scheme 2). In the case of the others 6 , 7 and 12 the resulting allenyldienones were isolated. The 2,G-dimethyl substituted ethers 8 , 9 , 10 and 11 resp. first give the usual allenyl- dienones (Scheme 3). These then undergo a novel silver catalysed dienon-phenol-rearrangement (Sclzenzu4) to give the 3-allenylphenols 21 , 22 , 24 and 25 . Thc others 3 , 4 and 5 with free ortho positions presumably rearrange first to the non-isolated 2-allenyl-phenols 15 , 42 and 43 resp.(Scheme 7). These then rearrange, either thermally or by silver (1)ion catalysis to the 2H-chromenes 13 , 16 and 17 resp. The rate of the rearrangement of 2-allenylphenol ( 15 ) to 13 at room temperature in benzene or chloroform is approximately doubled when silver ions are present as catalyst.