2-Amino-1-cyan-glutaconsäureamid-1-methylester,ein Dimeres des Cyanessigesters und Cyanacetamid

Synthesis of methyl 3-amino-4-carbomyl-2-cyano-2-butenoate is described and2 a classified as a dimer of methyl cyanoacetate and cyanoacetamide. By ammonolysis of the dimer of methyl cyanoacetate with dimethylamine and anilines, resp. the dimethylamide and anilides, resp. (2 b and3 a–j) are obtained. Condensation with salicylaldehyde to the pyrone derivative4 proves the structure of2 a, ring closure reactions in basic or acidic medium yield the pyridones6 a and7 a,b, coupling with diazonium salts the pyridazines8 a–d. The amides2 and the anilides3 show hindered rotation of the enamino- and the amide-group by hydrogen bonds between the nitrogen functions and the ester carbonyl (Z-form). The G values are reported.

     

Synthesen von Xyluron- und Riburonsäurederivaten

Zusammenfassung Durch acylierende Dehydratisierung von 1,2-Isopropyliden-d-xylo-und-d-ribo-pentodialdo-furanoseoxim bzw. aus Furanuronsäureestern und-amiden werden über eine Reihe von Zwischenstufen verschiedene 3-O-Acyl-pentofuranuronsäurenitrile synthetisiert und deren Reaktionen untersucht.

---

Synthesis of xyluronic and riburonic acid derivatives

Various 3-O-acyl-pentofuranurononitrils were synthesized by acylating dehydration of 1,2-isopropylidene-d-xylo- andd-ribo-pentodialdo-furanose oximes, or pentofuranuronic acids via intermediates. Their reactions were investigated.

---

---

Mit 1 Abbildung

---

Aus den DissertationenH. W. Oberwalder (1970) undE. Wildschek (1967), Technische Hochschule in Graz.     

Über die Herstellung von Äther der enantio-14, 15-Dinorlabdan-Reihe aus Eperusäure

The Conversion of Eperuic Acid into Ethers of the enantio-14, 15-Dinorlabdane Series 5 and 6 are strongly odiferous substances of the ambra-type. Their enantiomers 7 and 8 , hitherto unknown, have been synthesized from eperuic acid (4) and their olfactory properties compared with those of 5 and 6 . 4 was esterified by CH₂N₂ and dehydrogenated with (C₆H₅Se)₂/H₂O₂ to the α,β-unsaturated ester 9 (61%). Oxidation by KMnO₄ in acetone yielded the ketone 3 (60%). Epoxidation followed by treatment with acid converted 3 into the acetals 7 (61%) and 8 (14%). 7 and 8 differ from 5 and 6 in odor intensity, and 6 and 8 show slightly different odor quality.     

Die Bildungswärmen von MnSi1,73, MnSi,Mn5Si3 und Mn3Si

By means of vapor pressure measurements using theTorker method (Torsion-Knudsen Effusion Recoil) as well as theKnudsen tanspiration technique in connection with a mass spectrometer, the heats of formation of the following compounds were found to be –6.5±0.7 kcal/g atom (Mn_0.366Si_0.634), –7.8±0.6 kcal/g atom (Mn_0.50Si_0.50), –7.3±0.6 kcal/g atom (Mn_0.625Si_0.375), and –6.6±0.6 kcal/g atom (Mn_0.75Si_0.25).

---

---

Mit 7 Abbildungen     

1,6-Eliminationsreaktionen an Spirocoleonon; Charakterisierung der ersten Spiro[(methylcyclopropan)-phenanthren]-1,3-dion-Derivate

Preparation of the First Spiro[(methylcyclopropan)-phenanthrene]-1,3-dione Derivatives by 1,6-Elimination Reactions of Spirocoleons Spirocoleons, e.g. coleon J ( 1 ), on treatment with 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) in aprotic solvents, undergo enolization followed by a rapid 1,6-elimination with formation of the hitherto unknown 2-methyl-spiro[cyclopropane-1,2′(1′H)-phenanthrene]-1′,3′(4′bH)-dione system, e.g. 3 . In protic solvents, base-catalyzed solvolysis of the spirocyclopropane predominates.     

Mass spectrometric analysis of ceramic components for solid oxide fuel cells

For the determination of trace impurities in ceramic components of solid oxide fuel cells (SOFCs), some mass spectrometric methods have been applied such as spark source mass spectrometry (SSMS), laser ionization mass spectrometry (LIMS), laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) and inductively coupled plasma mass spectrometry (ICP-MS). Due to a lack of suitable standard reference materials for quantifying of analytical results on La _x Sr _y MnO₃ cathode material a matrix-matched synthetic standard-high purity initial compounds doped with trace elements-was prepared in order to determine the relative sensitivity coefficients in SSMS and LA-ICP-MS. Radiofrequency glow discharge mass spectrometry (rf-GDMS) was developed for trace analysis and depth profiling of thick non-conducting layers. Surface analytical techniques, such as secondary ion mass spectrometry (SIMS) and sputtered neutral mass spectrometry (SNMS), were used to determine the element distribution on surfaces (homogeneity) and the surface contaminants of SOFC ceramic layers.Dedicated to Professor Dr. rer. nat. Hubertus Nickel on the occasion of his 65th birthday     

Photochemische Reaktionen. 107. Mitteilung. Zur Photochemie offenkettiger 2,6-bzw. 2,7-Dien-Carbonylverbindungen

The Photochemistry of Open-Chained 2,6- or 2,7-Dien-Carbonyl Compounds On ¹n, π*-excitation (λ > 347 nm) citral (5) and the methyl ketone 10 isomerize to compounds A (7, 19) and B (6, 20) , whereas the phenyl ketone 11 changes into the isomer 24 of type E. Evidence is given that the conversions to A and B may arise from the ³n, π*-state of the 2,6-diene-carbonyl compounds. On ¹n, π*-excitation (λ = 254 nm) 5 and 10 yield the isomers A (7, 19) and D (18, 22) , but no products of type B. Furthermore, conversion of 10 to the isomer 21 of type C is observed. Selective ¹n, π*-excitation (λ = 254 nm) as well as selective ¹n, π*-excitation (λ > 347 nm) of the 2,7-diene-carbonyl compounds 12 and 13 give rise to isomerization to the compounds F (25, 28) , exclusively. The intramolecular [2 + 2]-photocycloadditions are shown to be triplet processes. UV.-irradiation (λ > 280 nm) of compounds F (25, 28) furnishes the isomeric products G (26, 29) which photoisomerize to oxetanes of type H (27, 30).     

Effect of surface covering of lactose carrier particles on dry powder inhalation properties of salbutamol sulfate

The effect of the surface covering of lactose carrier particles on the dry powder inhalation properties of salbutamol sulfate was investigated. Lactose carrier surfaces were covered with sucrose tristearate (J-1803F) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with various particle surface conditions prepared by surface covering. These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covering lactose carrier were significantly different, showing that the in vitro inhalation properties of salbutamol sulfate were improved. In vitro inhalation properties increased with the percentage of J-1803F added. Using this surface covering system would thus be valuable for increasing the inhalation properties of dry powder inhalation with lactose carrier particles.     

Influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier

The influence of storage humidity on the in vitro inhalation properties of salbutamol sulfate dry powder with surface covered lactose carrier was investigated. In the present study, drug/carrier powder mixtures were prepared consisting of micronized salbutamol sulfate and lactose carriers with different particle surface conditions prepared by surface covering. Lactose carrier surfaces were covered with vegetable magnesium stearate (Mg-St-V) by a high-speed elliptical-rotor-type powder mixer (Theta-Composer). These powder mixtures were aerosolized by a Jethaler), and the in vitro inhalation properties of salbutamol sulfate were evaluated by a twin impinger. Compared with the powder mixed with uncovered lactose carrier, the in vitro inhalation properties of the powder mixture prepared using the surface covered lactose carrier were little decreased with increased in relative humidity (RH), showing that the in vitro inhalation properties of salbutamol sulfate were improved at high RH. Using this surface covering technique would thus be valuable for storage humidity of dry powder inhalation (DPI) with lactose carrier particles.     

Dibenzotetraaza crown ethers: a new family of crown ethers based on o-phenylenediamine

Dibenzotetraaza (DBTA) crown ethers possess two o-phenylenediamine moieties. They are homologues of dibenzo crown ether phase-transfer catalysts and were prepared from the condensation of benzimidazoles with oligo(ethyleneglycol) dichlorides and oligo(ethyleneglycol) ditosylates. Compounds with ring sizes ranging from 18-crown-6 to 42-crown-14 were prepared. In addition, various altered benzimidizoles were used to produce DBTA crown ethers with modified substituents and ether bridges, as well as benzimidazolidine crown ethers. The synthetic approach presented here proved to be a convenient route to a new family of crown ethers with overall yields of up to 48% based on the benzimidazole. Yields for the ring-closing step were generally high, ranging from 51% to 94%, without the need for high-dilution conditions. Reaction of the DBTA crown ethers with alkyl and benzyl halides was found to be a facile way to obtain the corresponding tetra(N-organyl) compounds. Picrate extraction studies were carried out to determine phase-transfer catalytic capabilities. Extraction efficiencies for alkali-metal ions were lower than those for dibenzo-18-crown-6. Efficiencies were higher for other metal ions, with some selectivity for Pb(2+). Tetra(N-methyl) DBTA-18-crown-6 generally exhibited higher extraction efficiencies than its N-H analogue, but the selectivity was lower.