Review: Separation and Pharmacology of Chiral Compounds in Traditional Chinese Medicine

More than 60% commonly used pharmaceutical active ingredients are chiral compounds. Developing more effective and safe chiral compounds has become a focus in the pharmaceutical industry. Chiral compounds widely exist in traditional Chinese medicine and include alkaloids, flavonoids, volatile oils, and amino acids. The characterization of chiral compounds used in traditional Chinese medicine remains limited. Here, the characterization of chiral compounds commonly used in traditional Chinese medicine is reviewed focusing upon their separation and pharmacology.     

Electrochemical Determination of Uric Acid Using a Multiwalled Carbon Nanotube Platinum–Nickel Alloy Glassy Carbon Electrode

Platinum–nickel nanoparticles were synthesized by a reduction procedure. The Pt–Ni/C composite was characterized by X-ray diffraction, infrared spectroscopy, transmission electron microscopy, and electrochemical analysis. The measurements show that the Pt–Ni/multiwalled carbon nanotubes provided higher electrocatalytic activity for the oxidation of uric acid than Pt–Ni/carbon black. The sensor prepared from the characterized material provided a long linear dynamic range from 0.1 to 240.4?µM with a detection limit of 0.03?µM and a sensitivity of 41.21?µA?mM^?1?cm^?2. The reported modified electrode also provided excellent selectivity, good stability, and satisfactory reproducibility for the determination of uric acid.     

H(Fe)ZSM-5分子筛的合成、表征及其催化性能的研究

用水热法合成出含铁ZSM-5沸石,并对其物相、外貌、结构组成、吸附、表面酸性和催化活性等性能作了测试。ESR和XPS测定结果表明Fe~(3+)进入沸石骨架。实验结果表明,表面总酸性较弱,L酸位浓度较大的H(Fe)ZSM-5在甲醇转化反应中有利于低碳烃的齐聚和异构化,而酸性较强的HZSM-5易使低碳烯烃氢转移而生成大量的气态烃。     

Rapid Preparation of Mesoporous Methylsilsesquioxane Aerogels by Microwave Heating Technology

Microwave heating technology is known as an alternative to traditional gas and electric heating sources. In this work, mesoporous methylsilsesquioxane (MSQ) aerogels were prepared via a sol–gel process accompanied by microwave heating technology, and microwave heating was used in the gelation of sol and the drying of wet gels, respectively. The effects of hexadecyltrimethylammonium chloride (CTAC) as a surfactant and template, hydrochloric acid (HCl) as a catalyst, ethanol as a solvent, sodium hydroxide (NaOH) as a gelation agent, and microwave power on the pore structure of as-prepared MSQ aerogels were investigated in detail. Microwave heating at low power results in the acceleration of sol–gel transition and achieves the gelation within a few minutes. Appropriate amounts of chemical reagents and microwave heating at high power allow the preparation of mesoporous MSQ aerogels with a BET-specific surface area of 681.6 m²·g⁻¹ and a mesopore size of 19 nm, and the resultant MSQ aerogel still has a BET specific surface area as high as 134 m²·g⁻¹ after heat treatment at 600 °C for 2 h, showing high thermal stability. The MSQ aerogels/fibre composite possesses a low thermal conductivity of 0.039 W/(m·k)⁻¹, displaying good thermal insulation. Microwave heating technology is a promising heating method for the preparation of other aerogels.     

通过"双离子键"固载于季鏻盐聚合物的[Rh(CO)I3]2–物种在多相乙醇羰基化中的应用

贵金属物种(Rh或Ir络合物)在均相羰基化和氢甲酰化催化过程得到了广泛的应用,但始终存在分离繁琐等问题,其均相多相化可很大程度上简化分离操作,故一直广受重视.单位点催化剂因其具有可与均相相比拟的较高金属利用率和选择性而成为均相多相化的重要研究方向之一.研究发现,在碘物种存在的情况下用于固载金属物种的配位键容易断裂,进而导致金属物种的流失,而通过离子键固载的[Rh(CO)₂I₂]^–物种更加稳定,比如著名的甲醇羰基化“Acetica^TM”工艺中,[Rh(CO)₂I₂]^–负一价阴离子物种是以离子键的方式固定在带有阳离子骨架的甲基化聚乙烯吡啶树脂上.与甲醇羰基化过程类似的乙醇羰基化过程是生产重要化工中间体丙酸的主要途径之一,但该过程的均相多相化始终存在着稳定性差这一关键问题.为了解决这一问题,基于之前将固载于季鏻盐聚合物的[Rh(CO)I₃]^2–应用于甲醇羰基化的工作,我们将类似的季鏻盐聚合物固载Rh基催化剂Rh-TPISP用于多相乙醇羰基化过程,通过多种表征进一步证明了Rh物种和P物种结构,并提出了“双离子键”模型.P的K边XANES证明了聚合物TPISP的季鏻化阳离子骨架特征.HAADF-STEM测试表明Rh-TPISP中的Rh呈现单位点分散的状态.Rh的XPS和XANES结果证明了Rh-TPISP中Rh物种的价态介于0~+1.通过EXAFS的拟合解析给出了[Rh(CO)I₃]^2–活性中心结构.由于[Rh(CO)₂I₂]^–为经典的羰基化活性中心,为了进一步证明该结构的正确性,我们将Rh-TPISP的EXAFS和IR谱图与标样[PPh3Et]⁺[Rh(CO)₂I₂]^–对比发现:在EXAFS谱图中,Rh-TPISP中的Rh-C峰高低于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-C峰高,而Rh-TPISP中的Rh-I峰高高于[PPh3Et]+[Rh(CO)₂I₂]^–的Rh-I峰高,这就说明Rh-TPISP中Rh物种的Rh-C配位数小于2,而Rh-I配位数大于2;在IR谱图中,标样[PPh3Et]+[Rh(CO)₂I₂]^–中有两个羰基振动峰,与该物种的两个Rh-C配位键相符,而Rh-TPISP中的只有一个羰基振动峰,说明Rh-C配位数为1.因此,Rh-TPISP催化剂的季鏻盐骨架中的每个P物种带有一个正电荷,每个带有两个负电荷的[Rh(CO)I₃]^2–通过与两个[P]⁺的静电作用进行固载,形成“双离子键”结构.该催化剂在固定床乙醇羰基化过程中表现出优异的羰基化活性、选择性和稳定性.在3.5 MPa、195 oC反应近1000 h后,Rh-TPISP催化剂TOF保持在约350 h–1,丙酰基选择性为95%以上,高出所有文献报道的均相和多相乙醇羰基化活性.其较高的活性主要是因为[Rh(CO)I₃]^2–比传统Rh活性相[Rh(CO)₂I₂]^–具有更强的富电子性,而较高的稳定性主要是由于“双离子键”这种强静电作用比“AceticaTM”工艺中“单离子键”更有利于Rh物种的固载.故Rh-TPISP催化剂中的“双离子键”对其优异的催化性能具有极其重要的作用,对后续多相乙醇羰基化的发展具有重要意义.     

基于多肽识别的电化学生物传感技术

多肽具有分子量小、易于合成、生物兼容性好、稳定性高及序列灵活多样等优点.因此,多肽作为新型生物识别元件,已被广泛应用于生物传感器的构建.电化学分析灵敏度高、准确度好、设备简单、检测范围广且易于操作.本文介绍了基于多肽识别的电化学生物传感器技术,包括多肽的修饰与固定化、多肽与待测物的识别及检测原理;综述了近五年多肽电化学...     

Two 2D uranyl coordination complexes showing effective photocatalytic degradation of Rhodamine B and mechanism study

Two new hydrostable two-dimensional(2 D) uranyl coordination complexes [(UO_2)_5(μ_3-O)_2(nbca)_2].7 H_2O(1) and [(UO_2)_3(nbca)_2(H_2O)_3]·2 H_2O(2)(H_3 nbca=5-nitro-1,2,3-benzenetricarboxylic acid) were hydrothermal synthesized.Single-crystal structural refinements reveal that both of the two complexes were formed by the packing of 2D uranyl coordination sheets via the hydrogen bonds.The nbca ligand coordinating to the uranyl polyhedron centers constructed the 2D sheets.There are UO_8 hexagonal bipyramids and UO_7 pentagonal bipyramids in 1 while only U07 pentagonal bipyramids in 2.Photocatalytic degradation of rhodamine B(RhB) in aqueous solution was studied.Complex 2 possesses better performance than 1 with 96.2 % of the RhB was degraded in only 60 min.Mechanism studies reveal that the dissolved oxygens are essential to the RhB degradation.The photocurrent density of 2 is more stable than that of 1,which indicating the stronger ability to separate photoexcited electrons and hole pairs of 2.     

One-pot synthesis of CoO–ZnO/rGO supported on Ni foam for high-performance hybrid supercapacitor with greatly enhanced cycling stability

The high specific capacitance along with good cycling stability are crucial for practical applications of supercapacitors,which always demands high-performance and stable electrode materials.In this work,we report a series of ternary composites of CoO-ZnO with different fractions of reduced graphene oxide(rGO) synthesized by in-situ growth on nickel foam,named as CZG-1,2 and 3,respectively.This sort of binder-free electrodes presents excellent electrochemical properties as well as large capacitance due to their low electrical resistance and high oxygen vacancies.Particularly,the sample of CZG-2(CoO-ZnO/rGO 20 mg) in a nanoreticular structure shows the best electrochemical performance with a maximum specific capacitance of 1951.8 F/g(216.9 mAh/g) at a current intensity of 1 A/g.The CZG-2-based hybrid supercapacitor delivers a high energy density up to 45.9 Wh/kg at a high power density of 800 W/kg,and kept the capacitance retention of 90.1% over 5000 charge-discharge cycles.     

The mosaic structure design to improve the anchoring strength of SiOx@C@Graphite anode

Silicon oxide (SiO_x)-based anodes have aroused great interest as the most promising alternative anode in the practical application of high-performance lithium-ion batteries. However, the electrochemical performance is inhibited because of the large volume change, and the electrode structure deteriorates during the cycling process, which hinders their practical application. In this article, a novel fabrication method for the synthesis of high-performance SiO_x@C@Graphite composites is presented. SiO_x particles are anchored on the graphite surface by chemical vapor deposition and compression molding. This structure makes up the shortcomings of poor electrical conductivity and poor bonding strength between SiO_x and graphite particles. It is beneficial to form a stable solid electrolyte interface and helps to maintain the structural integrity of electrode materials. As a result, the synthetic SiO_x@C@Graphite anode shows a high reversible capacity (2698.8 mA h), excellent cycle stability (about 76.9% capacity retention for 500 cycles) and a superior rate ability. Our research hopes to provide a new idea for improving the bonding strength of the surface coating.