Bioorthogonal Chemical Reporters for Selective In Situ Probing of Mycomembrane Components in Mycobacteria

The global pathogen Mycobacterium tuberculosis and other species in the suborder Corynebacterineae possess a distinctive outer membrane called the mycomembrane (MM). The MM is composed of mycolic acids, which are either covalently linked to an underlying arabinogalactan layer or incorporated into trehalose glycolipids that associate with the MM non‐covalently. These structures are generated through a process called mycolylation, which is central to mycobacterial physiology and pathogenesis and is an important target for tuberculosis drug development. Current approaches to investigating mycolylation rely on arduous analytical methods that occur outside the context of a whole cell. Herein, we describe mycobacteria‐specific chemical reporters that can selectively probe either covalent arabinogalactan mycolates or non‐covalent trehalose mycolates in live mycobacteria. These probes, in conjunction with bioorthogonal chemistry, enable selective in situ detection of the major MM components.     

Tuning the Mechanical Properties of Poly(Ethylene Glycol) Microgel‐Based Scaffolds to Increase 3D Schwann Cell Proliferation

2D in vitro studies have demonstrated that Schwann cells prefer scaffolds with mechanical modulus approximately 10× higher than the modulus preferred by nerves, limiting the ability of many scaffolds to promote both neuron extension and Schwann cell proliferation. Therefore, the goals of this work are to develop and characterize microgel‐based scaffolds that are tuned over the stiffness range relevant to neural tissue engineering and investigate Schwann cell morphology, viability, and proliferation within 3D scaffolds. Using thiol‐ene reaction, microgels with surface thiols are produced and crosslinked into hydrogels using a multiarm vinylsulfone (VS). By varying the concentration of VS, scaffold stiffness ranges from 0.13 to 0.76 kPa. Cell morphology in all groups demonstrates that cells are able to spread and interact with the scaffold through day 5. Although the viability in all groups is high, proliferation of Schwann cells within the scaffold of G* = 0.53 kPa is significantly higher than other groups. This result is ≈5× lower than previously reported optimal stiffnesses on 2D surfaces, demonstrating the need for correlation of 3D cell response to mechanical modulus. As proliferation is the first step in Schwann cell integration into peripheral nerve conduits, these scaffolds demonstrate that the stiffness is a critical parameter to optimizing the regenerative process.

     

Ultraviolet resonance Raman spectroscopy of a β‐sheet peptide: a model for membrane protein folding

The partitioning of a hydrophobic hexapeptide, N‐acetyl‐tryptophan‐pentaleucine (AcWL5), into self‐associated β‐sheets within a vesicle membrane was studied as a model for integral membrane protein folding and insertion via vibrational and electronic spectroscopy. Ultraviolet resonance Raman spectroscopy allows selective examination of the structures of amino acid side chains and the peptide backbone and provides information about local environment and molecular conformation. The secondary structure of AcWL5 within a vesicle membrane was investigated using 207.5‐nm excitation and found to consist of β‐sheets, in agreement with previous studies. The β‐sheet peptide shows enhanced Raman scattering cross‐sections for all amide modes as well as extensive hydrogen‐bonding networks. Tryptophan vibrational structure was probed using 230‐nm excitation. Increases in Raman cross‐sections of tryptophan modes W1, W3, W7, W10, W16, W17, and W18 of membrane‐incorporated AcWL5 are primarily attributed to greater resonance enhancement with the B_b electronic transition. The W17 mode, however, undergoes a much greater enhancement than is expected for a simple resonance effect, and this observation is discussed in terms of hydrogen bonding of the indole ring in a hydrophobic environment. The observed tryptophan mode frequencies and intensities overall support a hydrophobic environment for the indole ring within a vesicle, and these results have implications for the location of tryptophan in membrane protein systems. Copyright © 2009 John Wiley & Sons, Ltd.     

Buffer Standards for pH Measurement of N-(2-Hydroxyethyl)piperazine-N′-2-ethanesulfonic Acid (HEPES) for I=0.16 mol⋅kg−1 from 5 to 55 °C

The values of the second dissociation constant, pK ₂, of N-(2-hydroxyethyl) piperazine-N′-2-ethanesulfonic acid (HEPES) have been reported at twelve temperatures over the temperature range 5 to 55 °C, including 37 °C. This paper reports the results for the pa _H of eight isotonic saline buffer solutions with an I=0.16 mol⋅kg⁻¹ including compositions: (a) HEPES (0.01 mol⋅kg⁻¹) + NaHEPES (0.01 mol⋅kg⁻¹) + NaCl (0.15 mol⋅kg⁻¹); (b) HEPES (0.02 mol⋅kg⁻¹) + NaHEPES (0.02 mol⋅kg⁻¹) + NaCl (0.14 mol⋅kg⁻¹); (c) HEPES (0.03 mol⋅kg⁻¹) + NaHEPES (0.03 mol⋅kg⁻¹) + NaCl (0.13 mol⋅kg⁻¹); (d) HEPES (0.04 mol⋅kg⁻¹) + NaHEPES (0.04 mol⋅kg⁻¹) + NaCl (0.12 mol⋅kg⁻¹); (e) HEPES (0.05 mol⋅kg⁻¹) + NaHEPES (0.05 mol⋅kg⁻¹) + NaCl (0.11 mol⋅kg⁻¹); (f) HEPES (0.06 mol⋅kg⁻¹) + NaHEPES (0.06 mol⋅kg⁻¹) + NaCl (0.10 mol⋅kg⁻¹); (g) HEPES (0.07 mol⋅kg⁻¹) + NaHEPES (0.07 mol⋅kg⁻¹) + NaCl (0.09 mol⋅kg⁻¹); and (h) HEPES (0.08 mol⋅kg⁻¹) + NaHEPES (0.08 mol⋅kg⁻¹) + NaCl (0.08 mol⋅kg⁻¹). Conventional pa _H values, for all eight buffer solutions from 5 to 55 °C, have been calculated. The operational pH values with liquid junction corrections, at 25 and 37 °C have been determined based on the NBS/NIST standard between the physiological phosphate standard and four buffer solutions. These are recommended as pH standards for physiological fluids in the range of pH = 7.3 to 7.5 at I=0.16 mol⋅kg⁻¹.     

In vitro assessment of MRI issues at 3-Tesla for a breast tissue expander with a remote port

Objectives

A patient with a breast tissue expander may require a diagnostic assessment using magnetic resonance imaging (MRI). To ensure patient safety, this type of implant must undergo in vitro MRI testing using proper techniques. Therefore, this investigation evaluated MRI issues (i.e., magnetic field interactions, heating, and artifacts) at 3-Tesla for a breast tissue expander with a remote port.

Methods

A breast tissue expander with a remote port (Integra Breast Tissue Expander, Model 3612-06 with Standard Remote Port, PMT Corporation, Chanhassen, MN) underwent evaluation for magnetic field interactions (translational attraction and torque), MRI-related heating, and artifacts using standardized techniques. Heating was evaluated by placing the implant in a gelled-saline-filled phantom and MRI was performed using a transmit/receive RF body coil at an MR system reported, whole body averaged specific absorption rate of 2.9-W/kg. Artifacts were characterized using T1-weighted and GRE pulse sequences.

Results

Magnetic field interactions were not substantial and, thus, will not pose a hazard to a patient in a 3-Tesla or less MRI environment. The highest temperature rise was 1.7 °C, which is physiologically inconsequential. Artifacts were large in relation to the remote port and metal connector of the implant but will only present problems if the MR imaging area of interest is where these components are located.

Conclusions

A patient with this breast tissue expander with a remote port may safely undergo MRI at 3-Tesla or less under the conditions used for this investigation. These findings are the first reported at 3-Tesla for a tissue expander.     

Synthesis and Investigation of Derivatives of 1,8-Naphthalimide with a Red Emission via an Aromatic Nucleophilic Substitution Reaction

1,8-Napthalimides (NIs) have been widely used as fluorescent molecules in biological, chemical, and medical fields because NIs shows high stability and various fluorescence properties under different conditions. However, NIs typically display a fluorescence emission wavelength in the range of 350 – 550 nm which can be notably interfered with by autofluorescence in living cells, significantly limiting their bio-applications. Moreover, low solubility in aqueous media is another major limitation for NIs. In this project, four derivatives of NIs (1–4) have been synthesized via an aromatic nucleophilic substitution reaction and their photophysical properties have been investigated in various media (water, MeOH, MeCN, DMSO, EtOAc, and THF). All of these derivatives (1–4) show a long emission wavelength around 600 nm and high solubility in polar solvents. Particularly molecules (1–4) show the longest emission (624–629 nm) in water and the fluorescence intensity is not significantly varied in the range of pH 4–11. These unique features, long emission wavelength, high solubility, and high stability in difference pH media, will allow these derivative (1–4) to be used as excellent labeling reagents in the biological system.

     

Early experiences in establishing a regional quantitative imaging network for PET/CT clinical trials

The Seattle Cancer Care Alliance (SCCA) is a Pacific Northwest regional network that enables patients from community cancer centers to participate in multicenter oncology clinical trials where patients can receive some trial-related procedures at their local center. Results of positron emission tomography (PET) scans performed at community cancer centers are not currently used in SCCA Network trials since clinical trials customarily accept results from only trial-accredited PET imaging centers located at academic and large hospitals. Oncologists would prefer the option of using standard clinical PET scans from Network sites in multicenter clinical trials to increase accrual of patients for whom additional travel requirements for imaging are a barrier to recruitment. In an effort to increase accrual of rural and other underserved populations to Network trials, researchers and clinicians at the University of Washington, SCCA and its Network are assessing the feasibility of using PET scans from all Network sites in their oncology clinical trials. A feasibility study is required because the reproducibility of multicenter PET measurements ranges from approximately 3% to 40% at national academic centers. Early experiences from both national and local PET phantom imaging trials are discussed, and next steps are proposed for including patient PET scans from the emerging regional quantitative imaging network in clinical trials. There are feasible methods to determine and characterize PET quantitation errors and improve data quality by either prospective scanner calibration or retrospective post hoc corrections. These methods should be developed and implemented in multicenter clinical trials employing quantitative PET imaging of patients.     

Palladium-catalysed cross-coupling of organosilicon reagents

The palladium catalysed cross-coupling of organosilicon reagents with organo halides and pseudo-halides has developed over the past 30 years into an efficient and attractive carbon-carbon bond forming strategy. Extensive research within this field to expand and diversify on the scope of the organosilicon coupling reaction will continue to promote its use in the synthesis of biologically and pharmaceutically important organic molecules. The recent advances made within this area are explored in this critical review (199 references).     

Salt concentration influence on the efficiency of two cationic polymeric flocculants

The influence of the increase of the solution ionic strength on the flocculation of charged latex particles in the presence of cationic polymers is reported. Empirical flocculation rate constants are experimentally determined using particle counting and for two cationic polymers, one linear and the second with two branches. Comparisons are made with a solution containing monovalent salt only at different ionic concentrations in the absence of polymers. In all cases, polymer-induced flocculation is significantly more efficient than charge screening effects using salt only. Analysis of zeta potential measurements indicates that the charge neutralization and surface charge variations dictate the stability of the latex suspensions. Moreover, the addition of a small amount of salt in the polymer–particle mixtures results in a dramatic decrease of the polymer efficiency which is more pronounced for the linear polymeric flocculant. By increasing further the ionic strength, the rates of polymer flocculation are found to increase again but remain smaller than in the absence of salt.