Spectrophotometric flow injection determination of trace iodide in table salt and laver through the reaction of iodate with 3,5-Br2-PADAP and thiocyanate

A new simple, rapid and sensitive spectrophotometric flow injection method for the determination of trace iodide is described based on an ion associate of iodate (IO₃ ^–) with 2- (3,5-dibromo-2-pyridylazo)-5-diethylamino-phenol (3,5-Br₂-PADAP) and thiocyanate (SCN^–). In a strongly acidic medium, this unstable violet product was formed with an absorption maximum at 605 nm. Flow injection is an ideal method to reproducibly monitor the transient signal. Various parameters were optimized using the Super Modified Controlled Weighted Centroid Simplex Method (SMCWC). Under the optimum experimental conditions, iodide could be determined in the range of 1.00 × 10^–6 and 2.4 × 10^–5 mol l^–1. The correlation coefficient of the calibration curve is 0.9991. With a sampling frequency of 80 h^–1, the detection limit for iodide is 5.0 × 10^–7 mol l^–1. The proposed method has been applied to the determination of trace iodide after oxidizing I^– in table salt or laver to IO₃ ^–. In addition, the mechanisms of the ion association reaction was studied. Received: 15 August 1996 / Revised: 10 October 1996 / Accepted: 16 October 1996     

Direct determination of cadmium at parts-per-billion level in waters by derivative atomic absorption spectrometry using atom trapping technique

A method has been described for the direct determinations of trace cadmium using derivative atom trapping flame atomic absorption spectrometry with an improved water-cooled stainless steel trapping equipment. The characteristic concentration (gave a derivative absorbance of 0.0044) and detection limit (3sigma) of cadmium were 0.028 and 0.02 ng ml(-1) when collecting for a 1 min, respectively, which were 992 and 145-fold better than those of the conventional flame atomic absorption spectrometry. The detection limit and sensitivity of the proposed method for a 2 min collection time were 1 and 2 orders of magnitude higher than those of conventional flame atomic absorption spectrometry. The present method was applied to the determinations of cadmium in water samples with a recovery range of 91 approximately 111% and a relative standard deviation of 4.7 approximately 5.6%.     

Theoretical study on the reaction mechanism of vinyl radical with formaldehyde

A detailed computational study is performed on the radical-molecule reaction between the vinyl radical (C2H3) and formaldehyde (H2CO), for which only the direct hydrogen abstraction channel has been considered by previous and very recent theoretical studies. At the Gaussian-3//B3LYP/6-31G(d) and CBS-QB3 levels, the direct H-abstraction forming C2H4 + HCO has barriers of 3.9 and 4.7 kcal/mol, respectively. The addition barrier to form H2CCHCH2O has barriers of 2.8 and 2.3 kcal/mol, respectively. Subsequently, there are two highly competitive dissociation pathways for H2CCHCH2O: One is the formation of the direct H-extrusion product H2CCHCHO + H, and the other is the formation of C2H4 + HCO via the intermediate H2CCH2CHO. Surely, the released energy is large enough to drive the secondary dissociation of HCO to H + CO. Because the involved transition states and intermediates of the H2CCHCH2O evolution all lie energetically lower than the entrance addition transition state, the addition-elimination is more competitive than the direct H-transfer for the C2H3 + H2CO reaction, in contrast to previous expectation. The present results can be useful for future experimental investigation on the title reaction.     

Direct determination of brucine by square wave voltammetry on 4-amino-2-mercaptopyrimidine self-assembled monolayer gold electrode

4-Amino-2-mercaptopyrimidine self-assembled monolayer (AMP SAMs/Au) was prepared on a gold electrode. The AMP SAMs/Au was characterized by using attenuated total reflection-fourier transform infrared (ATR-FTIR) and A.C. Impedance. The electrochemical behavior of brucine on AMP SAMs/Au was studied by cyclic voltammetry (CV) and square wave adsorptive stripping voltammetry (SWASV). The modified electrode showed an excellent electrocatalytic activity for the redox of brucine. The catalytic current increased linearly with the concentration of brucine in the range of 4.0 x 10(-7) to 2.0 x 10(-4) mol l(-1) by square wave voltammetry response. The detection limit was 6.0 x 10(-8) mol l(-1).     

锆对铂重整催化剂性能的影响规律

以正庚烷的转化为探针反应 ,研究了添加元素锆对铂重整催化剂性能的影响规律。结果表明 ,在 4 50℃和连续流动条件下 ,Pt/γ -Al2 O3催化剂中引入锆不仅能够提高铂催化剂的稳定性和芳构化产率、抑制氢解和异构化 ,而且能使铂催化剂保持初活性。锆含量在 0 .56%左右 ,其调变作用最为显著。     

Microcalorimetric investigation of the growth of the <Emphasis Type="Italic">Escherichia coli</Emphasis> DH5α in different antibiotics

The effects of Amoxicillin Sodium and Cefuroxime Sodium on the growth of E. coli DH5α were investigated by microcalorimetry. The metabolic power-time curves of E. coli DH5α growth were determined by using a TAM air isothermal microcalorimeter at 37°C. By evaluation of the obtained parameters, such as growth rate constants (k), inhibitory ratio (I), the maximum heat power (P _m) and the time of the maximum heat power (t _m), one found that the inhibitory activity of Amoxicillin Sodium vs. E. coli DH5α is enhanced with the increasing of the Amoxicillin Sodium concentration, and the Cefuroxime Sodium has a stimulatory effect on the E. coli DH5α growth when the concentration is about 1 μg mL⁻¹. The IC₅₀ for the Amoxicillin Sodium and the Cefuroxime Sodium are 1.6 and 2.0 μg mL⁻¹, respectively, it implicates that the E. coli DH5α is more sensitive to Amoxicillin Sodium than Cefuroxime Sodium.     

Ferromagnetic ordering and metamagnetism in malonate bridged 3D diamond-like and honeycomb-like networks: [Cu(mal)(DMF)]n and [[Cu(mal)(0.5pyz)].H2O]n (mal = Malonate Dianion,DMF = N,N-dimethylformamide,pyz = Pyrazine)

Two three-dimensional (3D) malonate bridged networks, [Cu(mal)(DMF)](n) (1) and [[Cu(mal)(0.5pyz)].H(2)O](n) (2), have been synthesized in H(2)O-DMF solution. Compound 1 exhibits ferromagnetic ordering below 2.6 K (T(c)), and 2 displays a metamagnetic behavior below 3.2 K (T(N)).     

应用扩展的重叠分辨率法优化液相色谱条件分离二茂铁类化合物

本文对优化液相色谱分离条件的重叠分辨率法进行了改进与扩展：首先利用全范围的二元线性梯度淋洗进行溶剂强度的优化，再通过重叠分辨率法进行了溶剂选择性的优化，并且建立了计算机系统，使此方法程序化。利用此方法建立了分离Ｎ－二茂铁甲酰基－Ｎ＇－芳基硫脲类衍生物的最佳流动相体系。     

Chemical species produced in the reaction between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline and their iron(II) complexes: electrochemical studies and analytical applications

The cyclic voltammetric behavior of carbon paste electrodes modified by direct admixing with the products of the reactions between ethanedial (glyoxal) and 5-amino-1,10-phenanthroline at 100°C and that of their iron(II) complexes is reported. The ligand(s) produced in absence of iron(II) are able to complex iron(II) and copper(II) ions reversibly, but other ions such as nickel(II), cobalt(II), cadmium(II) and manganese(II), if complexed, show no electrochemical activity. Admixing with the products of the reaction in the presence of excess of iron(II) ion, because of high insolubility and fast electron exchange, produces surfaces useful for amperometric detection in continuous-flow systems. The voltammetric and amperometric behavior in the presence of HSO^?₃ ions is reported in order to illustrate this application.     

Theoretical study and rate constant calculation for the reactions of SH (SD) with Cl2, Br2, and BrCl

The mechanisms of the SH (SD) radicals with Cl2 (R1), Br2 (R2), and BrCl (R3) are investigated theoretically, and the rate constants are calculated using a dual-level direct dynamics method. The optimized geometries and frequencies of the stationary points are calculated at the MP2/6-311G(d,p) and MPW1K/6-311G(d,p) levels. Higher-level energies are obtained at the approximate QCISD(T)/6-311++G(3df, 2pd) level using the MP2 geometries as well as by the multicoefficient correlation method based on QCISD (MC-QCISD) using the MPW1K geometries. Complexes with energies less than those of the reactants or products are located at the entrance or the exit channels of these reactions, which indicate that the reactions may proceed via an indirect mechanism. The enthalpies of formation for the species XSH/XSD (X = Cl and Br) are evaluated using hydrogenation working reactions method. By canonical variational transition-state theory (CVT), the rate constants of SH and SD radicals with Cl2, Br2, and BrCl are calculated over a wide temperature range of 200-2000 K at the a-QCISD(T)/6-311++G(3df, 2pd)//MP2/6-311G(d, p) level. Good agreement between the calculated and experimental rate constants is obtained in the measured temperature range. Our calculations show that for SH (SD) + BrCl reaction bromine abstraction (R3a or R3a') leading to the formation of BrSH (BrSD) + Cl in a barrierless process dominants the reaction with the branching ratios for channels 3a and 3a' of 99% at 298 K, which is quite different from the experimental result of k3a'/k3' = 54 +/- 10%. Negative activation energies are found at the higher level for the SH + Br2 and SH + BrCl (Br-abstraction) reactions; as a result, the rate constants show a slightly negative temperature dependence, which is consistent with the determination in the literature. The kinetic isotope effects for the three reactions are "inverse". The values of kH/kD are 0.88, 0.91, and 0.69 at room temperature, respectively, and they increase as the temperature increases.