侧基含羟基的主链偶氮苯液晶共聚酯的合成及其光响应行为

以4,4’-双(6-羟基己氧基)联苯(BHHBP)、4,4’-双(6-羟基己氧基)偶氮苯(BHHAB)为液晶基元,利用苹果酸二乙酯(DM)和苯基丁二酸(PSA)采用无规共聚,合成了侧基含羟基的偶氮苯液晶共聚酯(Az-LCP).先在液晶态下拉伸取向,然后用六亚甲基二异氰酸酯(HDI)交联制备单畴取向偶氮苯液晶交联网络.通过核磁共振氢谱(1H-NMR)、凝胶渗透色谱(GPC)测试,对合成的Az-LCP进行结构表征,通过示差扫描量热分析(DSC)、X射线衍射(XRD)、偏光光学显微镜(POM)等对其液晶相变行为进行表征,研究了偶氮苯含量、交联密度、薄膜厚度对其光致弯曲行为的影响.结果表明,偶氮苯含量10%,交联12 h的Az-LCP1具有最佳的光致弯曲回复行为.     

Surface Design for Immobilization of an Antimicrobial Peptide Mimic for Efficient Anti-Biofouling

Microbial surface attachment negatively impacts a wide range of devices from water purification membranes to biomedical implants. Mimics of antimicrobial peptides (AMPs) constituted from poly(N-substituted glycine) „peptoids“ are of great interest as they resist proteolysis and can inhibit a wide spectrum of microbes. We investigate how terminal modification of a peptoid AMP-mimic and its surface immobilization affect antimicrobial activity. We also demonstrate a convenient surface modification strategy for enabling alkyne–azide „click“ coupling on amino-functionalized surfaces. Our results verified that the N- and C-terminal peptoid structures are not required for antimicrobial activity. Moreover, our peptoid immobilization density and choice of PEG tether resulted in a „volumetric“ spatial separation between AMPs that, compared to past studies, enabled the highest AMP surface activity relative to bacterial attachment. Our analysis suggests the importance of spatial flexibility for membrane activity and that AMP separation may be a controlling parameter for optimizing surface anti-biofouling.     

Sorbents for the Direct Capture of CO2 from Ambient Air

The urgency to address global climate change induced by greenhouse gas emissions is increasing. In particular, the rise in atmospheric CO₂ levels is generating alarm. Technologies to remove CO₂ from ambient air, or “direct air capture” (DAC), have recently demonstrated that they can contribute to “negative carbon emission.” Recent advances in surface chemistry and material synthesis have resulted in new generations of CO₂ sorbents, which may drive the future of DAC and its large‐scale deployment. This Review describes major types of sorbents designed to capture CO₂ from ambient air and they are categorized by the sorption mechanism: physisorption, chemisorption, and moisture‐swing sorption.     

Ultrafast,Low‐Cost,and Mass Production of High‐Quality Graphene

Fast, mass, and low‐cost production of high‐quality graphene, which is alluring, remains a great challenge, even though some approaches have shown potential for mass synthesis of graphene. Very recently a great breakthrough was made by Tour and co‐workers (Nature 2020, 577, 647–651): in just a second, easily exfoliated and highly crystalline graphene was produced from abundant carbon‐containing species by cost‐effective flash Joule heating with a low energy input of 7.2 kJ per gram graphene. Such an ultrafast, economic, and scalable process for high‐quality graphene production can be considered as a milestone in the graphene field and is highlighted in this article.     

Micromechanical Properties of Microstructured Elastomeric Hydrogels

Local, micromechanical environment is known to influence cellular function in heterogeneous hydrogels, and knowledge gained in micromechanics will facilitate the improved design of biomaterials for tissue regeneration. In this study, a system comprising microstructured resilin‐like polypeptide (RLP)–poly(ethylene glycol) (PEG) hydrogels is utilized. The micromechanical properties of RLP‐PEG hydrogels are evaluated with oscillatory shear rheometry, compression dynamic mechanic analysis, small‐strain microindentation, and large‐strain indentation and puncture over a range of different deformation length scales. The measured elastic moduli are consistent with volume averaging models, indicating that volume fraction, not domain size, plays a dominant role in determining the low strain mechanical response. Large‐strain indentation under a confocal microscope enables the visualization of the microstructured hydrogel micromechanical deformation, emphasizing the translation, rotation, and deformation of RLP‐rich domains. The fracture initiation energy results demonstrate that failure of the composite hydrogels is controlled by the RLP‐rich phase, and their independence with domain size suggested that failure initiation is controlled by multiple domains within the strained volume. This approach and findings provide new quantitative insight into the micromechanical response of soft hydrogel composites and highlight the opportunities in employing these methods to understand the physical origins of mechanical properties of soft synthetic and biological materials.     

Single‐Molecule Redox‐Targeting Reactions for a pH‐Neutral Aqueous Organic Redox Flow Battery

Aqueous organic redox flow batteries (AORFBs) have received considerable attention for large‐scale energy storage. Quinone derivatives, such as 9,10‐anthraquinone‐2,7‐disulphonic acid (2,7‐AQDS), have been explored intensively owing to potentially low cost and swift reaction kinetics. However, the low solubility in pH‐neutral electrolytes restricts their application to corrosive acidic or caustic systems. Herein, the single molecule redox‐targeting reactions of 2,7‐AQDS anolyte are presented to circumvent its solubility limit in pH‐neutral electrolytes. Polyimide was employed as a low‐cost high‐capacity solid material to boost the capacity of 2,7‐AQDS electrolyte to 97 Ah L^?1. Through in situ FTIR spectroscopy, a hydrogen‐bonding mediated reaction mechanism was disclosed. In conjunction with NaI as catholyte and nickel hexacyanoferrate as the catholyte capacity booster, a single‐molecule redox‐targeting reaction‐based full cell with energy density up to 39 Wh L^?1 was demonstrated.     

Peptide‐Conjugated Long‐Lived Theranostic Imaging for Targeting GRPr in Cancer and Immune Cells

Gastrin‐releasing peptide receptor (GRPr) plays proliferative and inflammatory roles in living systems. Here, we report a highly selective GRPr antagonist (JMV594)‐tethered iridium(III) complex for probing GRPr in living cancer cells and immune cells. This probe exhibited desirable photophysical properties and also displayed negligible cytotoxicity, overcoming the inherent toxicity of the iridium(III) complex. Its long emission lifetime enabled its luminescence signal to be readily distinguished from the interfering fluorescence of organic dyes by using a time‐resolved technique. This probe selectively visualized living cancer cells via specific binding to GRPr, while it also modulated the function of GRPr on TNF‐α secretion in immune cells. To our knowledge, this is the first peptide‐conjugated iridium(III) complex developed as a GRPr bioimaging probe and modulator of GRPr activity. This theranostic agent shows great potential at unmasking the diverse roles of GRPr in living systems.     

Stabilization of the Closed-Ring Isomer of Spiropyran by Amide Naphthotube in Water and Its Application in Naked-Eye Detection of Toxic Paraoxon

The thermodynamically unstable, colourless closed-ring isomer of spiropyran can be stabilized in water by the anti-configurational isomer of amide naphthotube. The influence of the binding on the thermodynamics and kinetics of spiropyran have been studied. The complex was further used to prepare a test paper that allows naked-eye detection of toxic paraoxon.     

Understanding energetic disorder in electron-deficient-core-based non-fullerene solar cells

Recent advances in material design for organic solar cells(OSCs) are primarily focused on developing near-infrared nonfullerene acceptors, typically A-DA′D-A type acceptors(where A abbreviates an electron-withdrawing moiety and D, an electron-donor moiety), to achieve high external quantum efficiency while maintaining low voltage loss. However, the charge transport is still constrained by unfavorable molecular conformations, resulting in high energetic disorder and limiting the device performance. Here, a facile design strategy is reported by introducing the "wing"(alkyl chains) at the terminal of the DA′D central core of the A-DA′D-A type acceptor to achieve a favorable and ordered molecular orientation and therefore facilitate charge carrier transport. Benefitting from the reduced disorder, the electron mobilities could be significantly enhanced for the"wing"-containing molecules. By carefully changing the length of alkyl chains, the mobility of acceptor has been tuned to match with that of donor, leading to a minimized charge imbalance factor and a high fill factor(FF). We further provide useful design strategies for highly efficient OSCs with high FF.     

Selective Synthesis of Z‐Cinnamyl Ethers and Cinnamyl Alcohols through Visible Light‐Promoted Photocatalytic E to Z Isomerization

A photocatalytic E to Z isomerization of alkenes using an iridium photosensitizer under mild reaction conditions is disclosed. This method provides scalable and efficient access to Z‐cinnamyl ether and allylic alcohol derivatives in high yields with excellent stereoselectivity. Importantly, this method also provides a powerful strategy for the selective synthesis of Z‐magnolol and honokiol derivatives possessing potential biological activity.