Determination of thermophysical properties of high temperature alloy IN713LC by thermal analysis

The presented paper deals with the study of thermophysical properties of cast and complex alloyed nickel based on superalloy Inconel 713LC (IN713LC). In this work, the technique of Differential Thermal Analysis was selected for determination of the phase transformation temperatures and for the study of the effect of varying heating/cooling rate at these temperatures. The samples taken from as-received state of superalloy were analysed at heating and cooling rates of 1, 5, 10, 20 and 50?°C?min^?1 with the help of the experimental system Setaram SETSYS 18_TM. Moreover, the transformation temperatures at zero heating/cooling rate were calculated. The recommended values for IN713LC after correcting to a zero heating rate, are 1,205?°C (T _?á?,solvus), 1,250?°C (solidus) and 1,349?°C (liquidus). Influence of heating/cooling rate on shift of almost all temperatures of phase transformations was established from the DTA curves. Undercooling was observed at the cooling process. The samples before and after DTA analysis were also subjected to the phase analysis by scanning electron microscopy using the microscope JEOL JSM-6490LV equipped with an energy dispersive analyser EDAX (EDS INCA x-act). Documentation of the microstructure was made in the mode of secondary (SEI) and backscattered (BEI) electron imaging. On the basis of DTA analysis and phase analysis it may be stated that development of phase transformations of the alloy IN713LC will probably correspond to the following scheme: melting?????? phase; melting???????+?MC; melting????eutectics ??/?á?; melting???????+?minority phases (e.g. borides); and matrix ???????á?.     

Anti-tumour promoting activity and antioxidant properties of girinimbine isolated from the stem bark of Murraya koenigii S

Girinimbine, a carbazole alkaloid isolated from the stem bark of Murraya koenigii was tested for the in vitro anti-tumour promoting and antioxidant activities. Anti-tumour promoting activity was determined by assaying the capability of this compound to inhibit the expression of early antigen of Epstein-Barr virus (EA-EBV) in Raji cells that was induced by the tumour promoter, phorbol 12-myristate 13-acetate. The concentration of this compound that gave an inhibition rate at fifty percent was 6.0 μg/mL and was not cytotoxic to the cells. Immunoblotting analysis of the expression of EA-EBV showed that girinimbine was able to suppress restricted early antigen (EA-R). However, diffused early antigen (EA-D) was partially suppressed when used at 32.0 μg/mL. Girinimbine exhibited a very strong antioxidant activity as compared to a-tocopherol and was able to inhibit superoxide generation in the 12-O-tetradecanoylphorbol-13-acetate (TPA)-induced differentiated premyelocytic HL-60 cells more than 95%, when treated with the compound at 5.3 and 26.3 μg/mL, respectively. However girinimbine failed to scavenge the stable diphenyl picryl hydrazyl (DPPH)-free radical.     

Experimental demonstration of novel end-pumping method for double-clad fiber devices

We present experimental demonstration of an end-pumping scheme based on splicing the multimode pump and single-mode signal fibers directly to a double-clad fiber with a tailored cross section. The method is used to pump a double-clad, erbium- and ytterbium-doped, fiber ring laser. The efficiency of the end-pumping method is tested by determining the slope efficiencies of the fiber ring laser and the fiber laser in a Fabry-Perot configuration. Comparable slope efficiencies are found when both laser configurations have similar output coupler ratios. The developed pumping scheme and double-clad fiber can find applications in cost-effective power fiber amplifiers and lasers.     

Vertical mixing and ecological effects of ultraviolet radiation in planktonic communities

We present a mathematical model for a phytoplankton-zooplankton system, based on a predator-prey scheme. The model considers the effects of sinking in the phytoplankton, vertical mixing and attenuation of photosynthetically active radiation (PAR) and ultraviolet radiation (UVR) in the water column. In a first approach, the model was studied under conditions of average PAR irradiance and shows fluctuations and stable equilibrium points. Secondly, we introduced the effects of photoperiod and photoinhibition by UVR and vertical mixing. Under these conditions, the phytoplankton biomass oscillates depending on the combined effects of UVR and mixing. Higher inhibition by UVR and longer mixing periods can induce strong fluctuations in the system but can also produce higher plankton peaks.     

An Improved Study of Electronic Band Structure and Optical Parameters of X-Phosphides (X=B,Al, Ga,In) by Modified Becke-Johnson Potential

We report the electronic band structure and optical parameters of X-Phosphides (X=B, Al,Ga,In) by first-principles technique based on a new approximation known as modified Becke-Johnson (mBJ). This potential is considered more accurate in elaborating excited states properties of insulators and semiconductors as compared to LDA and GGA. The present calculated band gaps values of BP, AlP, GaP, and InP are 1.867 eV, 2.268 eV, 2.090 eV, and 1.377 eV respectively, which are in close agreement to the experimental results. The band gap values trend in this study is as: Eg (mBJ-GGA/LDA)Eg (GGA) Eg (LDA). Optical parametric quantities (dielectric constant, refractive index, reflectivity and optical conductivity) which based on the band structure are also presented and discussed. BP, AlP, GaP, and InP have strong absorption in between the energy range 4-9eV, 4-7eV, 3-7eV, and 2-7eV respectively. Static dielectric constant, static refractive index and coefficient of reflectivity at zero frequency, within mBJ-GGA, are also calculated. BP, AlP, GaP, and InP show significant optical conductivity in the range 5.2-10eV, 4.3-8eV, 3.5-7.2eV, and 3.2-8eV respectively. The present study endorses that the said compounds can be used in opto-electronic applications, for different energy ranges.     

Numerical ray tracing through a modified cladding fiber optic segment sensors

By using 3-D geometric optics, the effect of a modified cladding on the transmission of light through optical fiber is investigated. Analysis of the light transmission of the optical fiber as function of the modified cladding refraction index and length are presented for various input illumination focused and compared with 3-D ray theory. Applications to chemical sensors are also discussed.The intensity of light signal transmitted through an optical fiber, which its cladding over a finite length is removed, is used as a sensor of refractive of liquids, in which the fiber is immersed. The transmitted light intensity is measured as a function of liquid refractive index for different lengths of the unclad section of the fiber and at each unclad length its sensitivity to change in refractive index of liquid is presented.     

Multicomponent synthesis of acylated short peptoids with antifungal activity against plant pathogens

In this article, we describe the synthesis of a small library of short peptoids composed of four glycine residues and acylated with a fatty acid that showed a remarkable in vitro activity against two fungal plant pathogens. Their straightforward synthesis implied two consecutive Ugi reactions and can be efficiently extended to the construction of highly diverse libraries.     

In Silico Molecular Docking Analysis of Karanjin against Alzheimer’s and Parkinson’s Diseases as a Potential Natural Lead Molecule for New Drug Design,Development and Therapy

Parkinson’s disease (PD) and Alzheimer’s disease (AD) are neurodegenerative disorders that have emerged as among the serious health problems of the 21st century. The medications currently available to treat AD and PD have limited efficacy and are associated with side effects. Natural products are one of the most vital and conservative sources of medicines for treating neurological problems. Karanjin is a furanoflavonoid, isolated mainly from Pongamia pinnata with several medicinal plants, and has been reported for numerous health benefits. However, the effect of karanjin on AD and PD has not yet been systematically investigated. To evaluate the neuroprotective effect of karanjin, extensive in silico studies starting with molecular docking against five putative targets for AD and four targets for PD were conducted. The findings were compared with three standard drugs using Auto Dock 4.1 and Molegro Virtual Docker software. Additionally, the physiochemical properties (Lipinski rule of five), drug-likeness and parameters including absorption, distribution, metabolism, elimination and toxicity (ADMET) profiles of karanjin were also studied. The molecular dynamics (MD) simulations were performed with two selective karanjin docking complexes to analyze the dynamic behaviors and binding free energy at 100 ns time scale. In addition, frontier molecular orbitals (FMOs) and density-functional theory (DFT) were also investigated from computational quantum mechanism perspectives using the Avogadro-ORCA 1.2.0 platform. Karanjin complies with all five of Lipinski’s drug-likeness rules with suitable ADMET profiles for therapeutic use. The docking scores (kcal/mol) showed comparatively higher potency against AD and PD associated targets than currently used standard drugs. Overall, the potential binding affinity from molecular docking, static thermodynamics feature from MD-simulation and other multiparametric drug-ability profiles suggest that karanjin could be considered as a suitable therapeutic lead for AD and PD treatment. Furthermore, the present results were strongly correlated with the earlier study on karanjin in an Alzheimer’s animal model. However, necessary in vivo studies, clinical trials, bioavailability, permeability and safe dose administration, etc. must be required to use karanjin as a potential drug against AD and PD treatment, where the in silico results are more helpful to accelerate the drug development.     

A Review on Recent Progress of Stingless Bee Honey and Its Hydrogel-Based Compound for Wound Care Management

Stingless bee honey has a distinctive flavor and sour taste compared to Apis mellifera honey. Currently, interest in farming stingless bees is growing among rural residents to meet the high demand for raw honey and honey-based products. Several studies on stingless bee honey have revealed various therapeutic properties for wound healing applications. These include antioxidant, antibacterial, anti-inflammatory, and moisturizing properties related to wound healing. The development of stingless bee honey for wound healing applications, such as incorporation into hydrogels, has attracted researchers worldwide. As a result, the effectiveness of stingless bee honey against wound infections can be improved in the future to optimize healing rates. This paper reviewed the physicochemical and therapeutic properties of stingless bee honey and its efficacy in treating wound infection, as well as the incorporation of stingless bee honey into hydrogels for optimized wound dressing.     

Maleic Anhydride Polyethylene Octene Elastomer Toughened Polyamide 6/Polypropylene Nanocomposites: Mechanical and Morphological Properties

A series of polyamide 6/polypropylene (PA6/PP) blends and nanocomposites containing 4 wt% of organophilic modified montmorillonite (MMT) were designed and prepared by melt compounding followed by injection molding. Maleic anhydride polyethylene octene elastomer (POEgMAH) was used as impact modifier as well as compatibilizer in the blend system. Three weight ratios of PA6/PP blends were prepared i.e. 80:20, 70:30, and 60:40. The mechanical properties of PA6/PP blends and nanocomposite were studied through flexural and impact properties. Scanning electron microscopy (SEM) was used to study the microstructure. The incorporation of 10 wt% POEgMAH into PA6/PP blends significantly increased the toughness with a corresponding reduction in strength and stiffness. However, on further addition of 4 wt% organoclay, the strength and modulus increased but with a sacrifice in impact strength. It was also found that the mechanical properties are a function of blend ratio with 70:30 PA6/PP having the highest impact strength, both for blends and nanocomposites. The morphological study revealed that within the blend ratio studied, the higher the PA6 content, the finer were the POEgMAH particles.